Tender For Constructing Maratha Bhavan At Gimavi Tal Guhagar Dist Ratnagiri
Tender Value
20.22 Lakhs
Estimated cost
Bid Submission
21 Dec 2024
0 days left
EMD
25000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
guhagar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Constructing Maratha Bhavan At Gimavi Tal Guhagar Dist Ratnagiri
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum,includingremoving theexcavated material up to a distance of 50m. beyond thebuilding area and stacking and spreading as directed, dewatering, preparing the bedfor the foundation and necessary backfilling, ramming,watering including shoring andstrutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means |
| 2 | Excavation for foundation in Hard-rock by blasting including trimming and leveling the bed bychisellingwherenecessaryandremovingtheexcavatedmaterialandstackingitin measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (Lift from 1.5m To 3.0 m) By Mechanical Means |
| 3 | Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Panmixer) etc.complete.With fine aggregate (Crushed sand VSI Grade) |
| 4 | ProvidingLateritestonemasonryincementmortar1:6in foundation and plinth including racking out joints when plastering is to be done/strikingjoints when no plastering is to be done watering and scaffolding. |
| 5 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal forR.C.C. work in foundations like raft, strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailingout water, Stee centering formwork, laying / pumping cover blocks, compaction and curing rough ening the surface if special finish is to be provided (Excluding reinforcementand structural steel) etc.complete ,with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 6 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm.Layers including watering and compacting etc. complete. |
| 7 | Providing dry/trap/ granite/ quartzite/ gneiss rubble stone soling 15 cmto 20 cmthick including hand packing and compacting etc. complete. |
| 8 | Providing and laying Cast in situ/ReadyMix cement concrete M-20 of trap /granite/ quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of suffici entminimumthickness to give a smooth and even surface or roughening if special finish is tobe provided and curing etc. complete.(Excluding reinforcement and structuralsteel). with fully automatic micro processor based PLC with SCADA enabled reversible DrumType mixer/ concrete Batch mix plant (Panmixer) etc. complete.With fineaggregate (Crushed sand VSI Grade) |
| 9 | Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap /granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs anddrawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compactionand roughening the surface if special finish is to beprovided and curing etc.complete. (Excluding reinforcement and structural steel).with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer / concrete Batchmix plant (Panmixer) etc. complete.With fineaggregate (Crushed sand VSI Grade) |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as perdetailed designsand drawings including steel centering, formwork, cover blocks, laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimumthickness to give a smoot hand even surface or roughening if special finish is tobe provided and curing etc. complete,(Excluding reinforcement and structuralsteel).with fully automatic micro processor based PLC with SCAD Aenable dreversibleDrumType mixer/ concrete Batchmixplant (Panmixer) etc. complete.With fineaggregate (Crushed sand VSI Grade) |
| 11 | ProvidingLateritestonemasonryincementmortar1:6in Super structure includingracking out joints whenplastering is tobedone/strikingjointswhenno plasteringistobedone watering and scaffolding. |
| 12 | Providing and laying Cast in situ /Ready Mix cement concrete M-20 of trap/ granite/quartzite/gneiss metal for R.C.C. chajja as per detailed design and drawings includingsteel centering, formwork ,cover blocks, laying / pumping, compacting and roughening the surface ifspecial finish is to be provided and curing complete.(Excluding reinforcementand structural steel ).with fully automatic micro processor based PLC with SCADAenabled reversible DrumType mixer/ concrete Batch mix plant (Panmixer) etc. complete.Withfineaggregate (Crushed sand VSI Grade) |
| 13 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C.pilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 14 | Providing andfixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. |
| 15 | Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutte with 35 mm thick style and rail with 2 5mm thick panels withopenable fanlight as per detailed drawings.Excluding the door frame 60 mm x 100 mmstainless steel fixtures and fastening and finishing thewoodworkwith oil painting3coats.(Excludingthedoor frame) |
| 16 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawing sapproved face veneers 3 mm thick on both faces or as directed ,all necessary beads,mouldings and lipping ,wrought ironholdfasts, chromium plated fixtures and fastenings, with brassmortise lock, chromiumplated handles on both sides, and finishing with French Polish etc. complete |
| 17 | ProvidingandfixingFPR Door shutter 30mm thick factory made Shutter excluding framr, including stainless steelfixture and fastening and T.W beding to junctions of panelled insert sand as instructed by enginner etc. complete |
| 18 | Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:3without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. |
| 19 | Providing internal cement plaster 6mmthick ina single coat incementmortar 1:4 with out neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. |
| 20 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete |
| 21 | Providing andl aying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622 / 2006 (group D II-A)and 7 to 8 mm thick for flooring in required position laid on abed of 1:4 cemen tmortar including cement float, filling joint with white / colour cement slurry cleaning curing etc. complete. |
| 22 | Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 23 | Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. |
| 24 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete. |
| 25 | Providing sills of polished Kadappa stone 25 mm to 30 mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. |
| 26 | Providing and fixing in position. (asperI.S.1868/1982) aluminium sliding window of two tracks with rectangular pipe having over all dimension?63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram / One Running Metre. and window frame bottom track section 61.85 x 31.75 x1.20 mm at weight 0.695 Kilogram / One Running Metre. Top and side track section 61.85 x 31.75 x1.30 mm at weight 0.659 Kilogram / One Running Metre. The shutter should be of bearing bottom40 x 18 x 1.25mm at weight 0.417 Kilogram / One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram / One Running Metre.And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram / On eRunning Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram / Running metre. As per detailed drawings and as directed by Engineer in chargewith all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mmt hick plain glass with all required screws and nuts etc, complete.With powder coating without box |
| 27 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 28 | Providing and fixing mild steel grill work for windows, ventilators,etc.15 Kilogram / One Square Metre as per drawing including fixtures necessary welding and paintingwithonecoatof anticorrosive paint and two coats of oil painting complete. |
| 29 | Providing and fixing Orissa type white glazed earthenware 575 mm water closetpan including Strap with earthen ware footrests,cast iron soil and ventpipe upto outsidefaceof thewall 1:2:4 brickbat lime concrete bedding without flushing tankand itsaccessories etc. complete. |
| 30 | Providing and fixing 100mmdia stabiliser pipe/ P.V.C. soil vent/waste pipe and withnecessaryfixtures and fitting such as bends, tees, single junctions, slottedvent, clamps etc. complete. |
| 31 | Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters |
| 32 | Providing, laying and fixing P.V.C. pipe of 25 mm dia. with fittings such as bends, tees, reducers, clamps,etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 33 | Providing, laying and fixingP.V.C. pipe of 15 mm dia. with fittings such as bends, tees, reducers, clamps,etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 34 | Providing and fixing 15 mm dia. Screw down bib /stop tap of brass including necessary socket union nut complete |
| 35 | ProvidingandfixingwhiteglazedearthenwareWashHandBasinof55cm.x40cm.size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. |
| 36 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W .pipes ,Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram with frame etc complete. |
| 37 | Providing and fixing board displaying information, such as\"Name of work, Tender cost, Name of Contractor ,Work completion and liability periodetc \",having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamelon back side and border /messages /symbols etc.with approved colour shadepaint complete,on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35 mm x 35 mm x 3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm ,3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cmx 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 38 | Test reports - Basic cement test, Sand- Fineness modulus, Aggregate- Sieve analysis, Concrete cube test |
| 39 | Royalty |
| 40 | RCC design |
AI Tender Summary
Tender Timeline
Dec 07, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedDec 21, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 23, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender