Tender For Protective And Repair Work Of Bridge And Approach Road On Chambal River Between Mahuasauda And Bansari On Hanumantpura-Bhind Road. - Construction Of Embankment With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transport, etawah-Uttar Pradesh

Tender For Protective And Repair Work Of Bridge And Approach Road On Chambal River Between Mahuasauda And Bansari On Hanumantpura-Bhind Road. - Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. 2 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 3 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.Laying Using Grader 4 Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.35kg per sqm on the prepared bituminous surface cleaned with mechanical broom. 5 Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregatesusing Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades. 6 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using seal coats 7 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. (PCC- M- 15) 8 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. (RCC- M- 20) 9 Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications 10 Stone Masonry Work in Cement Mortar 1:3 in Foundation complete as per Drawing and Technical Specifications. 11 Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification 12 Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications 13 Providing and erecting a W metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	14-12-2024	Date	Date	17-12-2024
2	16-12-2024	Date Change	Date	19-12-2024

INR 944 /-

INR 250000.0 /-

INR 25 Lakhs /-