Tender For 1- Construction Work Of Old Dilapidated Public Toilet (05 Seater) In Divisional Commissioner Office Moradabad. Civil Work - Civil Work ADemolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. DSR No. 15.4 2 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead, DSR No. 15.56 3 Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. DSR No. 15.7.1 4 Recovery of old Brick after dismteling of brick work. 5 1:4:8 (1 Cement: 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal size) DSR No. 4.1.8 6 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand DSR No. 6.1.1 7 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works above plith level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg/cum DSR No. 5.33.2.1 8 Steel reinforcement for R.C.C. work ready to use cut and bend rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR No. 5.22C.1 9 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Superstructure and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand DSR No. 6.3.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Superstructure and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand DSR No. 6.3.1 10 Half brick work with common burnt clay F.P.S. (non) modular) bricks of class designation 7.5 in Superstructure and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand IDSR No. 6.12.2 11 12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand) DSR No. 13.1.1 12 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1) Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size). DSR No. 10.13.1 13 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work DSR No. 13.99.1 14 Providing and applying white cement based putty of mm, of approved brand and average thickness 1 manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR No. 13.80 15 Wall painting with acrylic emulsion paint, having VOC Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve leven shade and colour. Two coats DSR No. 13.82.2 16 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only laying of tiles will be done with the notch trowel piler wedge clips of required thçkness levelling system and rubber mallet for placing the tiles gently and easily. DSR No. 11.41A.1.1 17 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter DSR No. 12.41.2 18 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured DSR No. 22.6 19 Providing and fixing false ceiling at all heights with Integral densified calcium silicate reinforced with fire and natural filler falsa colling tiles of Size b0b6b05 mum of approved texture, design and pallens as pop GPWD Specification 2018, to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanised from section of 0.33 mm thick (galvanized @ 120 grams per sq including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross of size 24x32 mm of length 1200 mm and secondaryintermediate Grass-Fal size 24x32 mm of length 600 mm to formgrid moduls al size 600 × 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing (@ 90 grams par sqm) 1.0. 12×60 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 num length and L-shape level adjuster of size 76x26x26x1.6 mm Bad with grid and Z cleat of size 25x37x26x1.6 mm thick with precut hole on both 26 mm flange to plorce into 12x60 mm or even bigger size dash fastener if require, fixed with Glavanised fron perimeter wall angle or size 24x24×0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450 mm center to canter and 40 mm long dry wall 8.8 screws. The work shall he carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge. With 15 mm thick tegular/bull edged without perforation plain/designer light weight calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles Confirming to JIS-Z2801 and ASTM G-21 DSR No. 26.22.2 20 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in hasic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm). DSR No. 21.3.1 21 Providing and fixing wash basin with C.I. brackets, 16 mm C.P. brass pillar taps, 32 mm C.P, brass waste of standard pattern, including painting of fillings and brackets, culling and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. DSR No. 17.7.1 22 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fillings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fillings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes DSR No. 18.8.1 23 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Internal work Exposed on wall 25 mm nominal dia Pipes DSR No. 18.7.3 24 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 litre white P.V.C. automatic flushing cistern. DSR No. 17.4.1 25 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. DSR No. 17.1.1 26 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. DSR No. 17.2.1 27 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore DSR No. 18.51.1 28 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore. DSR No. 18.52.1 29 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore. DSR No. 18.53.1 30 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR No. 17.31 31 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR No. 18.48 32 Providing and fixing Pre-laminated flat pressed 3 layer |(medium density) particle board or graded wood particle board IS: 3087 marked, with one side decorative and other side balancing lamination Grade 1, Type II exterior grade IS |: 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 25 mm thick. DSR No. 9.18.2 33 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia DSR No. 17.28.2.1 34 Providing and fixing Health Faucet (M.R) 35 Providing and fixing floor drain in Square shape 6x6 (M.R) 36 ELECTICAL WORK (PART-B)Wiring for light point/ fan point/exhaust fan point/ call bell point with 15 sq.mm FRIS PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required Group CDSR(1.10.3) 37 Supplying and fixing suitable size GI box with modular plate nad cover in front on Surface or in recess, including providing and fixing 6 pin 5/6 & 15/16A Module Socket outlet and 15/16A modular switch, connections etc, as required, DSR(1.32) 38 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC Insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required 2x1.5 sqmm+1x1.5 sqmm earth wire DSR(1.14.1) 20 2) 146 39 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required 2x2.5+ sqmm +1x2.5 sqmm earth wire DSR(1.14.2) 40 Supply & Fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making it good the same in case of recessed conduit as required DSR(1.21) 25mm Dia Conduit DSR(1.21.2) 41 Supply and fixing of 400mm Wall Fan complete in all respect NSI (MR) 42 Supply and fixing of 300mm Fresh Air Fan complete in all respect NS! (MR)
