|
| 1 | MATERIAL SUPPLY FOR MGNREGS WORK |
| 2 | Stone Aggregate(single size):40 mm nominbal size |
| 3 | Stone Aggregate(single size):20 mm nominal size |
| 4 | Stone Aggregate(single size): 10 mm nominal size |
| 5 | Coarse sand (zone III) |
| 6 | Fine sand (zone IV) |
| 7 | Portland Cement |
| 8 | Laterite stone of size 35x20x20cm |
| 9 | Twisted steel or deformed bars (Fe500D) |
| 10 | Solid blocks of size 40x20x10cm |
| 11 | Second class kail wood in planks |
| 12 | Second class kail wood in scandling |
| 13 | Hollock ballies 125mm dia |
| 14 | Structural steel such as tees ,angles ,channels and R.S joists |
| 15 | Red oxide zinc chromate primer |
| 16 | Adjustable span ESO+SI(2.35-3.40) |
| 17 | Adjustable telescopic prop 3m(2.02-3.75m) |
| 18 | Mild steel round bar above 12mm dia |
| 19 | Flats upto 10mm thickness |
| 20 | Rawl plug 50mm(designation 10no.s) |
| 21 | Anjili wood scantles |
| 22 | Bright finished or black enameled mild steel butt hinges 100x58x1.90mm |
| 23 | Bright finished or black enameled mild steel butt hinges 50x37x1.50mm |
| 24 | Bright finished or black enameled mild steel screws 40mm |
| 25 | Bright finished or black enameled mild steel screws 20mm |
| 26 | Anjili wood planks |
| 27 | Float glass sheet of nominal thickness 4mm (weight not less than 10kg/sqm) |
| 28 | 50mmx42mmx2mm thick factory made door frame of PVC extruded sections in white ,grey or wooden finish |
| 29 | 24mm thick factory made shutters with styles, rails and panels of PVC extruded sections in white,grey or wooden finish |
| 30 | Oxidised mild steel tower bolt (barrel type) 200x10mm |
| 31 | Oxidised mild steel screws 30mm |
| 32 | Iron hooks and eyes 100mm |
| 33 | 200mm aluminium aldrop |
| 34 | Brass 100mm mortice latch and lock with 6 levers without pair of handles |
| 35 | Pair anodised aluminium lever handles for 100mm mortice latch and lock |
| 36 | Anodised aluminium handles 125mm with plate 175x32mm |
| 37 | Chromium plated Brass screws 25mm |
| 38 | Ceramic glazed tiles 1st quality minimum thickness 5mm in all colours shade and designs of white ivory,grey, fume red brown etc |
| 39 | PVC pipe 110mm outer dia 6kgf/cm2 |
| 40 | Ceramic glazed tiles 1st quality minimum thickness 5mm in all colours shade and designs except burgundy,bottle green black |
| 41 | Vitrified floor tile 50x50cm |
| 42 | Vitreous China orrisa type w.c.pan size 580mm |
| 43 | Vitreous China flat black wash basin 630x450mm |
| 44 | 15mm C.P.brass tap |
| 45 | C.P.brass waste 32mm |
| 46 | C.I.bracket for wash basin and sinks |
| 47 | Stainless steel kitchen sink-without drain board 470x420mm bowl depth 178mm |
| 48 | PVC pipe 20mm outer dia 10kgf/cm2 |
| 49 | PVC pipe 25mm outer dia 12kgf/cm2 |
| 50 | PVC pipe 75mm outer dia 4kgf/cm2 |
| 51 | PVC pipe 75mm outer dia 6kgf/cm2 |
| 52 | PVC door Elbow 75mm dia |
| 53 | PVC bend 75mm dia |
| 54 | PVC door Elbow 110mm dia |
| 55 | PVC vent cowl 75mm |
| 56 | PVC bend 110mm dia |
| 57 | Brass full way valve with C.I. wheel (screwed end)25mm dia |
| 58 | Stainless steel (grade-304)hollow section round/square tubes |
| 59 | Stainless steel bolts/square bar and plates |
| 60 | Acrylic exterior paint |
| 61 | Exterior primer |
| 62 | Multi surface paint |
| 63 | Metal primer(U.G) |
| 64 | Mild steel tubes hot finished welded type |
