Tender For Milak Nagar Palika Parishad Reorganization Water Supply Scheme To The Ulb Milak Supply Of All Materials Labour T And P Etc For Construction Of Over Head Tank Pump House Scada Room Cum Lab Staff Quarter Boundary Wall With Gate Site Development S, Milak-Uttar Pradesh

TDR : 46560578

Tender Notice
Corrigendum Details
BOQ

Expired

Milak , Uttar Pradesh

Tender Brief : Corrigendum : Tender For Milak Nagar Palika Parishad Reorganization Water Supply Scheme To The Ulb Milak Supply Of All Materials Labour T And P Etc For Construction Of Over Head Tank Pump House Scada Room Cum Lab Staff Quarter Boundary Wall With Gate Site Development S

Document Fees
₹ 23600 /-

EMD
₹ 2350000.0 /-

Tender Value
Refer document

Submission Date
20-12-2024

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	17-12-2024	Corrigendum I	Other	20-12-2024

Name of Work:MILAK NAGAR PALIKA PARISHAD REORGNIZATION WATER SUPPLY SCHEME UNDER AMRUT 2.0 PROGRAMME

Sl. No.	Item Description
1	Submission of design, drawing, testingof bearing capacity of soil and supply of all material, labour T&P etc. and construct as per tenderer\"s own seismic proof design and drawings (approved by the department) complete intze Type on raft or pile cum raft foundation with columns and braces of1050 KL/20M, 850KL/20 M,Two Nos R.C.C. Over head Tank from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm . The design of the tank shall base on safe bearing capacity of soil at site as 8 T/m2 and depth of foundation as 3.00 m from existing ground level on pile/raft foundation. made up level of OHT will be taken as 1.00 M above existing gound level. Extra earth required for made up level will be arranged by the contractor at his own cost. The work will include testing of Bearing Capacity of soil at site also from a Goverment Engineering College such as IIT/BHU/AMU/NIT or as per direction of Engineer-in-charge. If the bearing capacity of soil less than 8 T/m2 than the contractor will submit the design on the same B.C. No extra payment will be paid for this. All other details of tank not covered here shall also be as per specifications enclosed.
2	ZONE-11050 KL / 20.0 M Staging
3	ZONE-2850 KL / 20.0 M Staging
4	Submission of test report of Soil bearing capacity only through recognized and approved insitution as recommended by Engineer-in-charge.
5	Submission of 5 sets of detailed design and drawing of OHT from any recognized University as per direction of Engineer-in-charge.
6	All components of R.C.C. O.H.T. will be casted in M-30 grade conc. or as per approved design including fixing of various pipes and ventilator at top and fixing of M.S. Sheet of 10 gauge manhole cover of 60 cm x 60 cm size with frame and locking arrangement and railing including supply of all material.
7	R.C.C. stair case with 1.0 m minimum clear width attached with tank body (as two column based ) as an access to Balcony and Top Dome of tank from ground level as per design & drawing with 1.25m high railling and gate with cabin as per specification including supply of all materials.
8	M.S. ladder made of 50 X 50 X 6 mm angle section and 20 mm plain M.S. bars (specification of M.S. should be as per IS 800-2007) with hand rails of 20 mm medium class G.I. pipes on both sides in three rows from balcony to top dome resting on an RCC plateform (75 X 75 cm and 10 cm thick) projecting from top ring beam and one alluminium ladder inside the tank body ( from manhole in top dome to bottom dome).
9	Proper R.C.C. railing and 20 mm dia medium class G.I. pipe (in 3 rows) on both sides of stair case, around the balcony at each landing from landing with top ring beam upto manhole on the top dome and at the periphery. The G.I. pipes will be supported on R.C.C. postsof 100 mm dia or on the posts made of 50 X 50 X 6 mm M.S. angle section, spaced at intervals not more than 1.5 m.
10	Supply and fixing of water level indicator with all necessary arragement such as inverter etc. As per specifications and fixing of lightening conductor and earth plate etc. As per specifications.
11	D.I. manhole of min 60 X 60 cm size made of M.S. channel section with adequate cover made of M.S. sheet of minimum 3mm thickness hinged with manhole with locking arrangment. This manhole should be fixed at top dome at proper place.
12	Testing of tank for water tightness as per specifications enclosed including supply of water.
13	Supply of all materials and construction of 80mm thick, 40 mm. thickR.C.C. floor, apron and 15cm dia semi circular drain around apron in a slope towards wash out chamber.
14	Three coats of approved quality and shade of Apex exterior paint like apex ultima supreme of approved quality over concrete work including supply of all materials etc.
15	Three coats of anti corrosive/aluminum /black Japan paint of approved quality on all iron work pipes and specials including supply of all material.
16	Supplying carting and fixing of following sizes D.I. D/F pipes with required specials such as well mouth, D.I./D.F. Bend, duck foot bend in inlet, outlet, over flow and wash out of the tank including supply of M.S. Clamps, rubber insertion sheet, nut bolts, washer etc. complete as per specifications.
17	ZONE-11050 KL / 20.0 M Staging
18	(a) 150 mm dia in inlet as required (Seperate for each)
19	(b) 400 mm dia in outlet as required
20	(c) 400 mm dia in over flow as required
21	(d) 100 mm dia in wash out as required
22	ZONE-2850 KL / 20.0 M Staging
23	(a) 150 mm dia in inlet as required (Seperate for each)
24	(b) 400 mm dia in outlet as required
25	(c) 400 mm dia in over flow as required
26	(d) 100 mm dia in wash out as required
27	Supplying and fixing of following sizes C.I./D/F sluice valves of PN-1 pressure of approved make as per relevant latest I:S specifications including supply of all jointing and other materials such as rubber insertion sheet, nut bolts, washer etc. complete as per specifications.
28	ZONE-11050 KL / 20.0 M Staging
29	(a) 150 mm dia in inlet as required (Seperate for each)
30	(b) 400 mm dia in outlet as required
31	(c) 400 mm dia in over flow as required
32	(d) 100 mm dia in wash out as required
33	ZONE-2850 KL / 20.0 M Staging
34	(a) 150 mm dia in inlet as required (Seperate for each)
35	(b) 400 mm dia in outlet as required
36	(c) 400 mm dia in over flow as required
37	(d) 100 mm dia in wash out as required
38	Supply all materials labour, T&P and construct brick masonry sluice valve chambers as required including R.C.C. Cover as per departmental type design at sluice valve fixed on inlet, outlet and washout pipes. The R.C.C. Cover shall be casted in M.S. Angle section with handles on both sides. (Sluice Valve chamber for washout and overflow may be combined.)
39	The words U.P. Jal Nigam, staging, year of construction, capacity of O.H.T. And slogan approved by Engineer-in-charge shall be painted prominently in letter not less than 30 cm in height on O.H.T.
40	Trial Run of all works for 4 Months.
41	Maintenance for 12 months including supply of all materials etc. Complete.
42	Rehabilation of divisional office including repairing of old existing structure ,fixing of new sanitaryfittings & construnction of new toilet ,supply and repairing of electronic equipements & furnitures with all labour material T&P etc all complete in direction engineer -in-charge.
43	RISING MAIN - Supply of the following sizes of D.I. pipes Class K-7/K-9 conforming to latest I.S. 8329/2000 complete in all respect F.O.R. destination including all taxes and insurance.
44	150 mm dia K-9
45	100 mm dia K-9
46	Dismantling of following type of surface including sorting out and staking of serviceablematerials of disposal of unserviceable materials up to a distance of 8 KM.
47	B.O.E. ROAD
48	BITUMINOUS ROAD
49	C.C. ROAD
50	INTERLOCKING TILES
51	Excavation for pipe trenches in ordinary soil,(lime, clay or sand including lift up to 1.5m and lead up To 50m and refilling, watering, ramming of excavated earth in to trenches and disposal of surplus earth up to 8 Km from the center of the foundation trenches.
52	Carting from the store (up to 8 Km.) The following sizes of D.I. double pipeK-7 /K-9 and specials to the site of work lowering them in to trenches and laying true to alignment and gradient including jointing, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. com- plate but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints.
53	150 mm dia K-9
54	100 mm dia K-9
55	Supply and Fixing of following size of C.I. D/F Sluice Valve /Scour Valve/ Air valve/ Fire Hydrants as per I.S. 780 –1960 tested to 10 Kg per sq. cm includingfittings Cartage of materials, labour,T&P etc. complete.
56	Supply and Fixing of following size of C.I. D/F Sluice Valve /Scour Valve/ Air valve/ Fire Hydrants as per I.S. 780 –1960 tested to 10 Kg per sq. cm includingfittings Cartage of materials, labour,T&P etc. complete.
57	150 mm dia Sluice valve
58	100 mm dia Sluice valve
59	Provision for making bye pass arrangement including cutting of new/existing pipe ,fixing of fitting & providing all jointing materials. It also includes supply of Pipe,Tee,Tail pieces CI D joints nut bolts, rubber packings etc all complete.
60	150 mm dia
61	100 mm dia
62	Supply of all materials labour, T&P etc and construction of masonary type sluice valve chambers as per type design of the department. 1.2x1.2x1.5 with RCC slab of 120 mm thick including Fixing of slab etc.Complete.
63	Design and construct Thrust Block made in RCC with cement. Coarse sand& 20 mm guadge stone balast in proporation1;1.5:3 for pipe line , including supply of MS reinforcment wrought to required shape as nessasary , its bending fixing and bending the same with 0.5 mm thick bending wire in position and nessasary centering shuttring including curing as per instruction of EI. Size Of thrust Block-1.10x1.10x.1.10 M
64	Mild steel or Iron work in plan work such asR.C.C. Work wrough to required shape as necessary including its bending and supply of steel,wastage, over lapping and hooks etc complete required for proper completion of work.
65	Reinstatement of following type of road surface for laying pipe line including sorting out of serviceable materials and disposal of unserviceable materials upto a distance of 8 KM.
66	B.O.E. ROAD
67	BITUMINOUS ROAD
68	C.C. ROAD
69	INTERLOCKING TILES
70	DISTRIBUTION SYSTEM
71	Supply of the following sizes of DI K-7 & HDPE pipes(PN-6, PE-100) confirming to latest relevant I.S.Codes with DI/HDPE Specials conforming to I.S.- 8329/2000 and I.S.- 4984/2016 respectively etc complete in all respect F.O.R. destination including all taxes and insurance.
72	450 mm dia DI Pipe K-7
73	400 mm dia DI Pipe K-7
74	350 mm dia DI Pipe K-7
75	300 mm dia DI Pipe K-7
76	250 mm dia DI Pipe K-7
77	200 mm dia DI Pipe K-7
78	160 mm dia HDPE pipe (PN-6, PE-100)
79	140 mm dia HDPE pipe (PN-6, PE-100)
80	110 mm dia HDPE pipe (PN-6, PE-100)
81	90 mm dia HDPE pipe (PN-6, PE-100)
82	Dismantling of following type of surface including sorting out and staking of serviceablematerials of disposal of unserviceable materials up to a distance of 8 KM.
83	B.O.E. ROAD
84	BITUMINOUS ROAD
85	C.C. ROAD
86	INTERLOCKING TILES
87	Excavation for pipe line trenches in Ordinary soil,(lime, clay or sand Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in to trenches and disposal of surplus earth up to 8 KM from the center of the foundation trenches.
88	Laying & jonting of the following types and zizes of HDPE pipes, including supply of all electro fusion fittings, specials, jointing materials, making arrangement of electro fusion jointing apparatus & supply of electricity using generator etc. as per site requirement. All jointing work in HDPE pipe must be carried out using electro fusion process confirming to ISI 4984/2016, IS 7634 PART-II or their amendment including freight, insurance charges F.O.R. up to destination.
89	450 mm dia DI Pipe K-7
90	400 mm dia DI Pipe K-7
91	350 mm dia DI Pipe K-7
92	300 mm dia DI Pipe K-7
93	250 mm dia DI Pipe K-7
94	200 mm dia DI Pipe K-7
95	160 mm dia HDPE pipe (PN-6, PE-100)
96	140 mm dia HDPE pipe (PN-6, PE-100)
97	110 mm dia HDPE pipe (PN-6, PE-100)
98	90 mm dia HDPE pipe (PN-6, PE-100)
99	Supply and Fixing of following size of C.I. D/F Sluice Valve /Scour Valve/ Air valve/ Fire Hydrants as per I.S. 780 –1960 tested to 10 Kg per sq. cm includingfittings Cartage of materials, labour,T&P etc. complete.
100	Sluice Valve
101	350 mm dia
102	300 mm dia
103	250 mm dia
104	200 mm dia
105	150 mm dia
106	125 mm dia
107	100mm dia
108	80 mm dia
109	Supply of 80 mm dia C.I. Double flanged scour valves as per I.S. 780 class-1 working pressure 10 kg/Sqcm F.O.R Destination including all taxes and insurance.
110	Supply of underground sluice valves type fire hydrant consisting of 80 mm dia tail pieces, 80 mm dia duck foot band and 63 mm dia standard make iron coupling with cap and chain etc. complete to ISS 909 at site including all taxes.
111	Supply of 25 mm dia screwed down type air valve with gun metal seat at site stone including all taxes.
112	Supply of all materials, labour T&P etc. required and construct surface box/masonry type sluice / scour valve chamber as per type design including supply and materials labour, T&P etc. complete.
113	Masonry type
114	Surface box type
115	scour valves chamber
116	Supply of all materials, labour T&P Etc. required and construct 750 x 750 x 1000 mm size fire hydrant chamber as per type design including supply and fixing the 500 mm dia CI manhole cover.
117	Supply of all materials, labour T&P Etc. required and construct 350 x 350 x 500 mm size air valve chamber as per type design including supply and fixing the 500 mm dia CI manhole cover.
118	Construction of single pillar type masonrystand post as per type design.
119	Provision for crossing of drains for laying of pipe line including dismentalling of drains & reconstruction of the same.drains including of Casing pipe as per Unite Estimate Minimumwidth of Nalas 0.75M
120	Culvert Crosing3.5 M and above with M.S Cover Pipe etc. Complete.
121	Design and construct Thrust Block made in CCwith cement. Coarse sand& 20 mm guadge stone balast in proporation1;2;4 for pipe line , including supply of M.S. reinforcment wroughttorequired shape as nessasary , its bending fixing andbending the same with 0.5 mm thick bending wire in position and nessa -sary centering shuttring including curing as per instr -uction of EI. Size Of thrust Block-0.80x0.80x.0.80 M
122	Reinstatement of following type of road surface for laying pipe line including sorting out of serviceable materials and disposal of unserviceable materials upto a distance of 8 KM.
123	B.O.E. Road with 40% new bricks and 60%used old bricks over 30mm compacted local sand including all materials,labour,T&P etc complete
124	Bituminous Roads with granule sub base (G1-100mm, G2-75mm, G3-75mm thick),50mm thick bituminous macadam over priming coat and tack coat and 30mm thick SDBC/BC over tack coat & disposal of all debris and surplus earthwithin8 Km. distance as per direction of Engineer-in-charge, including all materials,labour,T&P etc complete
125	C.C. Road will be prepared with 10 cm thick P.C.C. 1:2:4 Cement: Coarse Sand & 20 mm Stone grit over base concrete 15 cm. P.C.C. 1:4:8 with cement coarse sand & 40 mm stone ballast after compacting the earth surface properly. The C.C. surface must be compacted with surface vibrator, including all materials,labour,T&P etc complete.
126	Interlocking Tile road:Tiles must be of the thickness & grade similar to that of the dismantled tiles over base concrete 75 mm thick PCC 1:4:8 cement: local sand: stone ballast as per existing road. The thickness of tiles shall be same as that of existing road, including all materials,labour,T&P etc complete.
127	Provision of house connection using with tapping tee/fusion method, 15 mm HDPE/GI pipe averag 5 meter long, brassferrule, heavy dutyPVC clamp, GI fittingsand Two brass tap & including in any size of pipe and following type of road dismentaling and reinstatement etc. all complete.
128	For KR Road
129	For BR Road
130	For CC Tile Road
131	For CCRoad
132	ProvidingMSpipe for casing including cartage upto site cutting weldingetccomplete.& Trenchless excavation of road and placing ofMS pipe in proper position and filling of extra earth removedduring excation, removing of surplus earth from work place etcall complete.
133	350 mmdia 6 mm thick with casing(zone-2)
134	200 mmdia 6 mm thick with casing(zone-3)
135	Supply of all materials labour,T&P etc and constructi -onof followingtype chambers as per type design of the department. For Trenchless Size Of Chember 1.50x1.50x3.30M
136	Provision for diversion of routes fo laying of pipe line including constructionoftemporarypassages if necessarymaking berikatingby ballies fixing sign board etc as per requirement.
137	Pump House cumchlorinating room(3.60x3.0x3.0)m and (2.25 x 2.25x 3.00)m for Zone-1 &2 )- 4 Nos
138	Excavation of earth in ordinary soil (loam clay or and) including lift upto 1.5 m and lead upto 50 m.filling, watering and ramming of excavated earth in between the building and sides of the foundation trenches or into the plinth and disposal of surplus earth upto a distance of 8 KM from the center of the foundation trenches.
139	Concrete with 40 mm gauge Ist class brick ballast, coarse sand and cement in proportion (8:4:1) in foundation including supply of all materials, labour,T&P etc required for proper completion of work.
140	Ist class brick work in 1:6 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour,T&P etc required for proper completion of work.
141	20 mm thick DPC With cement and approved coarse sand 1 :2including supply of 5% water proofing material, labour, T&P etc required for proper completion of work.
142	M.S. Angle iron chaukhat of 40mm x 40mm size supply and fixing including simple moulding straight work as in chaukhat and also supply of all material, labour, T&P etc. required for proper completion of the work.
143	150 mm thick RCC plinth bend With cement and approved coarse sand with 20 mm stone grit 1 :1.5:3 including supply of 5% water proofing material, labour, T&P etc required for proper completion of work.
144	Ist class brick work in 1:6 cement and Coarse sand mortar in super structure including supply of all materials, labour,T&P etc required for proper completion of work.
145	Supply and fixing of 1mm thick sheet iron panelled door, windows shutter including supply and fixing and adjustment of hinges , bolts, locks, handles, springs and other fittings but excluding supply and painting of fittings.
146	Supply and fixing of hold fast in doors and windows of size 25cm x 4cm x 9mm flat iron including their cutting and moulding and welding to required shape also including other material such as nails and screws etc. required for proper completion of the work.
147	R.C.C in lintel with cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 including supply of reinforcement and it bending and including its fixing and bindingits fixing in position with centering, curing, supply of all materials, labour,T&P etc required for proper completion of work.
148	R.C.C in sun shade with cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 including supply of reinforcement and it bending and including its fixing and bindingits fixing in position with centering, curing supply of all materials, labour,T&P etc required for proper completion of work.
149	R.C.C in slab with cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 including supply of reinforcement and it bending and including its fixing and bindingits fixing in position with centering, curing, supply of all materials, labour,T&P etc required for proper completion of work.
150	Mild steel or Iron work in plain work such asR.C.C. Work wrought to required shape as necessary including its bending and supply of steel,wastage, over lapping and hooks etc complete required for proper completion of work.
151	Mild steel grills in windows, wrought to required heavy/ small size form including supply of all materials,labour,T&P etc. Required for proper completion of the work.
152	Supply and lay complete 40 mm thick insulation layer of sand and clay over reinforcement brick or cement concrete.
153	Lime concrete with 25mm gauge brick ballast, white lime and surkhi in the proportion 100:18:36 in roof terracing including supply of all materials,labour,T&P etc. Required for proper completion of the work.
154	12 mm thick plaster with cement coarse sand mortar in 1:6 (over brick work with 3 mm floating coat of neat cement including supply of all materials, labour,T&P etc required for proper completion of work. From GL upto super structure.
155	Same as above item but in proprtion 1:2:2 with cement and coarse sandand fine sand mortar on ceiling
156	Supply andfixing 40 mm thick fully panelled sheesham wood shutter including supply and fixing and adjustment if hinges bolt, locks,handels ,spring and other fittings but excluding painting, supply of fittings
157	same as avobe but glazed windows shutters
158	Supply and fixing of oxidised iron fitting of approved make for doors and windows.
159	Painting and varnishing of new iron work with one coat priming and two coat of approved paint and varnish including supply of all materials, labour, T&P etc required for proper completion of work.
160	White washing with applying putty in two coats ensuring smooth surface including supply of all materials, labour, T&P etc required proper completion of work.
161	Color washing with exterior paint (like apex paint) in two coat over one primer coat including supply of all matrials, labour, T&P etc. required proper completion of work
162	Supply and fixing of Grider of 250 mm x 125 mm including its painting with approved paint and also one coat of primer.(SOR:1149) ISMB 250X125MM waight @ 47.30 kg per meter
163	Sand filling in plinth including supply of excavated earth from distance of eight km.
164	Supply of all materials, labour, T&P etc. required for the construction of stilling chamber V notch chamber90*90 mm including supply of V notch etc. all complete.
165	Rain water down pipe 100 mm dia AC/PVC with fixed MS clamp etc including supply of all materials, labour, T&P etc required proper completion of work.SOR 1286
166	Cartage & cost of earth work in filling in plinth including supply of excavated earth from distance of eight km.
167	25 mm thick 1:2:4 plan cement concretefloor with cement,coarse sand and 20 mm gauge approved stone ballast laid in panel finished with 3 mm floating coat of neat cement and 7.5 cm thick base concrete consisting 1 part of cement,4 part of coarse sand and 8 part ist class brick ballast 40 cm gauge(1:4:8) and removing any over lapping of mortar at the joist of panel if any and giving them uniform finished including supplymaterial, labour,T&P etc required for proper completion of work.
168	Construction of RCC 1:1.5:3 main hole cover 700X700 opening in roof slab & fixing it at opening encluding supply of all materials etc complete.
169	Boundary Wall, Approach Road & Site Development
170	Construction of boundry wall 1.8 meter height 0.23 M thick above P.L with RCC plinth beam of 0.20MX0.35 M ,RCC Coping.10M thickTotal foundation depth 1.35M asperdepartmental type design enclosed in drawingincluding Plastring,PCC,RCC,Colour painting with apex or ISI weather proof paint over two caot wall putty etc. supply ofallmateriallabourT&Petc required for completion of work.
171	Construction of boundry wall extra brick work due to lo land as per required for completion of work
172	Supply of all materials labourT&P etc and construction ofgate pillars and fixingthe MS gate in position including its fabrication etc as per departmental type design 3.6 M wide & 1.2 M heightgate.
173	3.60 m wide & 1.20 m height gate with wicket gate.
174	ConstructionofCC Tile (80 mm thick M-30 tile) approach road over 75mm thickPCC1:4:8including Prepata -tion of Sub grade etc. complete.(OHT Camp.)
175	Earth filling in the water workscompound including carting of soil from 5-6 Km from site, spreading in 15 cm layer, watering, ramming upto optimum moisture content level etc all complete.
176	Construction of recharge well unit connectingBye PassofTube well, Over flow of OHT & rain water of Engineer\"s Quarter / Staff Quarter etc complete.
177	Provision for inside Construction of Rectangular 300X300 mm drain in water works compus.
178	Slogan painting workfor awairness of save water and motivational quotes for saving water including supply of colours,paint and all material ,labour T&P for proper completion of work.
179	Provision of Tree & fixing of sign board at water works compound include- ing cost of tree,tree guard manaur, mali etc. complete.
180	Scada room cum Lab(1 No), Staff Quarter (2 Nos.)
181	Excavation of earth in ordinary soil (loam clay or and) including lift upto 1.5 m and lead upto 50 m.filling, watering and ramming of excavated earth in between the building and sides of the foundation trenches or into the plinth and disposal of surplus earth upto a distance of 50 m from the center of the foundation trenches.
182	Concrete with 40 mm gauge Ist class brick ballast,localsand and cement in proportion (8:4:1) in foundation including supply of all materials, labour,T&P etc required for proper compltion of work.
183	Ist class brik work in 1:6 cement and local sand mortar in foundation and plinth including supply of all materials, labour,T&P etc required for proper compltion of work.
184	20 mm thick D.P.C. With cement and approved coarse sand 1 : 2 including supply of 5% water proofing material, labour, T&P etc required for proper compltion of work.
185	Ist class brik work in 1:6 cement and local sand mortar in Super Structure and plinth including supply of all materials, labour,T&P etc required for proper compltion of work.
186	Same item as above but half brick thick wall.
187	Supply and fixing of door& Window chaukhat fabricated with50 x 50 x 6 mmsize angle iron or other suitable angle iron and T iron and MS fabricated with 203 cm, flat iron or well mess size as directed by Engineer- in- charge. This item include supply and fixing 3 hinges 10 cm size on each faced door and window with one coat of red oxide primer painting including carting, loading,unloading etc complete and also supply of all materials, labour,T&P etc complete.
188	Supply and fixing of holdfasts for door , windows frames.
189	R.C.C. Work cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 excluding supply of reinforcement and it bending but including its fixing and binding the same with 0.5 mm thick binding wire (to be supply by the contractor) centering nd shuttering supply of all materials, labour,T&P etc required for proper compltion of work.
190	R.C.C. Work in plinth beam cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 excluding supply of reinforcement and it bending but including its fixing and binding the same with 0.5 mm thick binding wire (to be supply by the contractor) centering nd shuttering supply of all materials, labour,T&P etc required for proper compltion of work.
191	R.C.C. Work in slab cement,coarse sand and 20 mm gauge approved stone ballast in proper ratio of 1:1.5:3 excluding supply of reinforcement and it bending but including its fixing and binding the same with 0.5 mm thick binding wire (to be supply by the contractor) centering nd shuttering supply of all materials, labour,T&P etc required for proper compltion of work.
192	Mild steel or Iron work in plain work such asR.C.C. Work wrough to required shape as necessary including its bending and supply of steel,wastage, over lapping and hooks etc complete required for proper completion of work.
193	Supply and fixing of Z section window frames and sutter openabele out side as per drawing and design approved by E/I hinges of approved qualitie M.S. or CI handals , holdfast 4 nos of MS Flat 25X5 mm and 150 mm Long pegs of MS 30 cm long having 4 holes with pagester and brackets welded or revited to frame complete including the cost of glass panes and including supply of all materials , labour T&P etc complete.
194	12 mm thick plaster with cement local sand mortar in 1:6 (over brick work with 3 mm floating coat of neat cement including supply of all materials, labour,T&P etc required for proper compltion of work. From GL upto supper structure.
195	Same as above but in proprtion 1:4 with cement and fine sand mortar on ceiling
196	Supply and fixing 3 mm glass strip in postion including supply of all material, labour T&P etc complete.
197	Supply and fix 40 mm thick sheesham wood part paneled and part glazed door and window shutters including supply and fixing of wooden cleats and stops and fixing and adjustment of hinges, bolts, locks, handles, springs and othr fitting but excluding painting and supply of fittings.
198	Supply of oxidized iron fittings of 16.20 approved make for doors and window.
199	Mild steel or iron work in windows grills wrought to required form including cutting moulding and welding where necessary and also including supply of steel bolts nuts screws etc. and their fixing as required for proper completionof the work.
200	Supply of galvanised mosquito proof heavy quality iron wire gauge 1.50 mm mesh or any other size over windows including supply of shisham wood pattens 50x12 mm necessary screws all materials labour T&P etc. required for 5.40 proper completion of the work
201	Painting and varnishing of new iron work with one coat priming and two coat of approved paint and varnish including supply of all materials, labour, T&P etc required for proper completion of work.
202	White washing with applying putty in two coats ensuring smooth surface including supply of all materials, labour, T&P etc required proper completion of work.
203	Color washing with exterior paint (like apex paint) in two coat over one primer coat including supply of all matrials, labour, T&P etc. required proper completion of work
204	Providing & Laying vitrified Floor Tiles (bell,kajaria or other standered make IS Code 15622)laid in 20mm thick cement mortar 1:4 including grouting of joints with cement and maching pigment etc.complete. size 600mmX600mm.
205	Providing & Laying vitrified Wall Tiles (bell,kajaria or other standered make IS Code 15622)laid in 20mm thick cement mortar 1:3 including grouting of joints with cement and maching pigment etc.complete. size 300mmX300mm.
206	115 mm String or drip coarse of Ist. Class brick in 1:6 cement and coarse sand Mortar including Plastering, cutting drip notch as required and including supply of all material, labour T&P etc. required for proper completion of work.
207	Sand filling in plinth including supply of excavated earth from distance of eight km.
208	Supply and lay complete 40 mm thick insulation layer of sand and clay over reinforcement brick or cement concrete.
209	Supply and fixing fan hooks box type including supply of all material, labour T&P etc complete.
210	Provision for internal electrificationincluding supply of ceiling fan,LED Bulbetc all material, labour T&P etc complete.
211	Provision for water supply and sanitry works includingsupply of all material, labour T&P etc complete.
212	Repeir work of OHT for Zone-3 (135 KL/20M)
213	Providing and erection of scaffolding and shuttering material like challi, gurra, nail, bans, ballia, patra etc. required for complete of work on all surgace area of OHT from top dome to G.L. so as to give strong and safe plateform to workers to work on all part of OHTfor repair and strengthning as per direction of engineer in-charge.
214	dismantling old water proofing layer from inside and applying new water proof plaster with approved compound and cement mortar such that rectifying all kind of seepage/leakage from OHT including supply of all materials, labour T&P etc complete.
215	Dismantling of old /existingCC flooring and disposal of debris upto 50 m including all labour T&P required complete.
216	40 mm thik 1:2:4 PCC floor with cement coarse sand and 20 mm stone ballast laid in panels finished with 3 mm floating coat of neat cement and 7.5 cm thik base concrete consisting of cement,local sand and brick ballast in proportion of 1:6:12 including all materials, labour T&P required complete.
217	Painting of outer surface of OHT with wheather proof paint (like apex etc.) as per direction of engineer in-charge.
218	Repeir work of OHT for Zone-4 (1600 KL/20M)
219	Providing and erection of scaffolding and shuttering material like challi, gurra, nail, bans, ballia, patra etc. required for complete of work on all surgace area of OHT from top dome to G.L. so as to give strong and safe plateform to workers to work on all part of OHTfor repair and strengthning as per direction of engineer in-charge.
220	dismantling old water proofing layer from inside and applying new water proof plaster with approved compound and cement mortar such that rectifying all kind of seepage/leakage from OHT including supply of all materials, labour T&P etc complete.
221	Dismantling of old /existingCC flooring and disposal of debris upto 50 m including all labour T&P required complete.
222	40 mm thik 1:2:4 PCC floor with cement coarse sand and 20 mm stone ballast laid in panels finished with 3 mm floating coat of neat cement and 7.5 cm thik base concrete consisting of cement,local sand and brick ballast in proportion of 1:6:12 including all materials, labour T&P required complete.
223	Supply and fixing of Ventilator Jali at OHT including repairing of the ventilator and fixing the same properly including supply of all material labour, T&P etc. Required for proper completion of work.
224	Supply and fixing of 20mm dia medium quality of G.I pipe relling with MS angle iron post of section 50x50x6 and 1.00 m height including grouting the angle iron post properly and fixing the pipe railingincluding supply of all material labour, T&P etc. Required for proper completion of work as per direction of Engineer incharge
225	Repairing of railing 20 mm medium quality
226	Supply and fixing of following device of the OHT including repairing of the ventilator and fixing the same properly including supply of all material, labour,and fixing of all appliances in the cleats with screw or nales T&P etc. Required for proper completion of work
227	Water level indicator with complete marked scale
228	Lightening Conductor with copper plate
229	Painting the iron work in small area with one coat of anti corrosive primer coat and two coat of approved enemal paint including supply of all material labour T&Petc as per direction of engineer in-charge.
230	Painting of outer surface of OHT with wheather proof paint (like apex etc.) as per direction of engineer in-charge.
231	Repair work of Pump House cumchlorinating room for (zone-3 & zone-4)
232	Scrapping and dismantling of old plaster of pump house and disposal of debris to a distance of atleast 50 m from site
233	dismantling of old RB or RC or RCC floor of pump housestaking of useful brick anddisposal of debris to a distance of atleast 50 m from site
234	40 mm thick 1:2:4 plan cement concretefloor with cement,coarse sand and 20 mm gauge approved stone ballast laid in penel finished with 3 mm loating coat of neat cement and 7.5 cm thick base concrete consisting 1 part of cemnet,4 part of local sand and 8 part ist class brick ballast 4 cm gauge(1:4:8) and removing any over lapping of mortar at the joist of panel if an and giving them uniform finished including supplymaterial, labour,T&P etc required for proper compltion of work.
235	Supply and fixing 3 mm glass strip in postion including supply of all material, labour T&P etc complete.
236	12 mm thick plaster with cement local sand mortar in 1:6 (over brick work with 3 mm floating coat of neat cement including supply of all materials, labour,T&P etc required for proper compltion of work. From GL upto super structure.
237	White washing with applying putty in two coats ensuring smooth surface including supply of all materials, labour, T&P etc required proper completion of work.
238	Color washing with exterior paint (like apex paint) in two coat over one primer coat including supply of all matrials, labour, T&P etc. required proper completion of work
239	Painting and varnishing of new iron work with one coat priming and two coat of approved paint and varnish including supply of all materials, labour, T&P etc required for proper completion of work.
240	Provisionfor internal& external \", electricworks including cost of all fixtures & cost of fittings, LED bulb, switch with conduet wiring fitting} pipes etc. & supply of all materials labour T&P etc. required for proper completion of the work & including cost of earthingpits and connection etc. complete. (for 3 nos PH)
241	Rain water down pipe 100 mm dia AC/PVC with fixed MS clamp etc including supply of all materials, labour, T&P etc required proper completion of work.
242	E&M works
243	CONSTRUCTION OF NEW TUBEWELL for Zone1 & 2
244	Transportation, Erection, Dismantling of Rig Machine and its T&P
245	Transportation, Erection, Dismantling of Compressor 250/350 PSI
246	Transportation, Erection, Dismantling of 2 Cusec/ 3 Cusec O.P. Unit and Yield test
247	Supply of Tubewell Assembly
248	M.S.Tubewell assembly with all required parts like plain pipe, Slotted pipe (as required upto 50% of plain pipes) rings, well cap bail plug, clamp reducer, central guide, suport structure etc. as required & as per typed design complete in all respect.
249	(Note- Axial Length of Reducer without Ring shall be measured with casing pipe)
250	300 mm dia M.S. Pipe
251	200 mm dia M.S. Plain/slotted
252	PEA-GRAVEL (As per IS:4097)
253	1.65 mm to 4.50 mm size Pea gravel of Lalkuwan quarry duly screened, washed and properly stacked at sitefor Tubewell
254	Drilling of bore by rig machine As Per IS:2800(Part I & II):
255	Drilling of bore by 600 mm dia bit GL to 40 mt. BGL.
256	Drilling of bore by 500 mm dia bit from 40 mt GL to 100 mt. BGL.
257	Drilling of bore by 500 mm dia bit 100 m BGL to 140 m. BGL.
258	Lowering of tube well assembly With M.S. rings, Bail Plug, Reducer Including welding:
259	Lowering of 300 mm dia M.S. Housing pipe from GL to 36 m.BGL
260	Lowering of 200 mm dia M.S. Plain/slotted pipe 36 m. BGL to 100 m. BGL
261	Lowering of 200 mm dia M.S. Plain/slotted pipe 100 m. BGL to 126 m. BGL
262	Development of tube well by 250 PSI air compressor and 3 cusec O.P. Unit to yield sand free discharge.
263	Development and testing of tube well by Air Compressor.
264	Development and testing of tube Well O.P.Unit to yield sand free Discharge.
265	Chemical and Bacteriological
266	test (Analysis of water sample)
267	Logging of borehole by departmental/approved electric logger
268	SITC OF PUMPING PLANT AND STABILIZER FOR ZONE 1 & 2
269	Supply, Installation, testing and Commissioning of 1250 lpm , 52 mtr Head For Zone-1 (2 nos) & 1200 lpm , 56 mtr Head For Zone-2 (2 nos)Pumping Plant including 24 met coloumn pipe, NRV,CI D/F Bend 90 deg., CI A/F Tee, D/F pipe (1.5 met long-2 Nos and 1 met long- 1 No ), Earthing, Painting,Toolset, wiring of pump house (with internal&external electrification),chainpully block and all pumping plant accessories with nut bolts and rubber packing etc.
270	SITC of 150 mm dia size motor operated actuators with metal sheeted sluice valves
271	Soft starter for above 25 HP pumpset with RS 485 Port-400V Class for above pumpset
272	SITC of 40 kva stabilizer for above pumpset
273	SITC of equipments for the items as given below :
274	Pressure transmitter
275	Misc. Items such as Protection Ring, Cutout, Electric resistance Rubber sheet, Transformer oil etc.-2019
276	Coloumn Pipe 5 mtr long
277	SITC OFSCADA /AUTOMATION WORK OF NEW PUMPING PLANT OF ZONE 1 & 2
278	CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog anddigital parameter and features as specifeid for tubewell to store and transmit data on GSm backbone RTU/PLC designed with logic to transfer data at multiple statiuonas specifeid.
279	GSM/GPRS based wireless communication with 4G modem for RTU/PLOc capable to transfer & gather data from remote site to controlstation all accessoreis included with signalenhancer antenna made for pumping plant internet charges as specifeid
280	CE/UL certifeid Intelligent Smart Energy Meter
281	CE/UL Certifeid Electromagnetic Flow Meter 150 mm size
282	auto Phase reversal unit of 250 amp rating with inbuilt delay and enclosure control panel etc.
283	CE/UL certifeid Surge Protecter for control panel.
284	CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters
285	Complete cabling including power cables of all equipment.
286	control panel with IP54 protection ,industrial grade for all equipments.separate for control (24V) and power equipment with capacitor bank panel to improve power factor.
287	Installation, commissioning & testing trial for tubewell
288	SITC OF AUTOMATIC CHLORINATION SYSTEM OF ZONE 1 & 2
289	Automatic Chlorination System compatible to SCADA system
290	SITC OF E&M WORK AT NEW OHT OF ZONE 1 & 2
291	CE/UL certifeid Radar Type level transmitter for OHT.
292	Actuator with new metal sheeted sluicevalve suitable to OHT outlet dia.
293	CE/UL certifeid Electromagnetic Flowmeter suitable for OHT outlet dia.
294	Installation, commissioning & testing trial for OHT
295	SITC of UPS 10 kva 3phase suitable for operation of Actuators installed at outlet line in case of Power Failure at time of Distribution water supply
296	Lighting at Water works campus with solar panel and LED light of 1 set
297	SITC OF STABILIZER AND OTHER REQUIRED E&M EQUIPMENTS OF ZONE 3
298	Soft starter for above pumpset with RS 485 Port-400V Class for above pumpset
299	SITC of 25 kva stabilizer for above pumpset
300	Pressure transmitter
301	Internal electrification of pump house
302	CE/UL certifeid Actuator with new metal sheeted valves
303	SITC OF AUTOMATIC CHLORINATION SYSTEM OF ZONE 3
304	Automatic Chlorination System compatible to SCADA system
305	SITC OF SCADA /AUTOMATION WORK OF EXISTING PUMPING PLANT OF ZONE 3
306	CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog anddigital parameter and features as specifeid for tubewell to store and transmit data on GSm backbone RTU/PLC designed with logic to transfer data at multiple statiuonas specifeid.
307	GSM/GPRS based wireless communication with 4G modem for RTU/PLOc capable to transfer & gather data from remote site to controlstation all accessoreis included with signalenhancer antenna made for pumping plant internet charges as specifeid
308	CE/UL certifeid Intelligent Smart Energy Meter
309	CE/UL Certifeid Electromagnetic Flow Meter of suitable size
310	auto Phase reversal unit of 250 amp rating with inbuilt delay and enclosure control panel etc.
311	CE/UL certifeid Surge Protecter for control panel.
312	CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters
313	Complete cabling including power cables of all equipment.
314	control panel with IP54 protection ,industrial grade for all equipments.separate for control (24V) and power equipment with capacitor bank panel to improve power factor.
315	Installation, commissioning & testing trial for tubewell
316	SITC OF EXISTING OHT AUTOMATION SYSTEM AT ZONE 3
317	CE/UL certifeid Radar Type level transmitter for OHT.
318	Actuator of 200 mm dia size with metal sheeted sluicevalve
319	CE/UL certifeid Electromagnetic Flowmeter 200 mm dia size
320	Installation, commissioning & testing trial for OHT
321	SITC of UPS 5 kva single phase suitable for operation of Actuators installed at outlet line in case of Power Failure at time of Distribution water supply
322	Lighting at Water works campus with solar panel and LED light of 1 set
323	SITC OF CHLORINE ANALYZER FOR ZONE 3 OHT
324	Supply, Installation, Testing & Commissioning of Chlorine analyser with MODBUS RTU as per given specification a) FRC sensors(range 0-5ppm)b) Analyzer with RS 485 O/P
325	CONSTRUCTION OF REBORE TUBEWELL (300x200mm dia) FOR ZONE 4
326	Transportation, Erection, Dismantling of Rig Machine and its T&P
327	Transportation, Erection, Dismantling of Compressor 250/350 PSI
328	Transportation, Erection, Dismantling of 2 Cusec/ 3 Cusec O.P. Unit and Yield test
329	Supply of Tubewell Assembly
330	M.S.Tubewell assembly with all required parts like plain pipe, Slotted pipe (as required upto 50% of plain pipes) rings, well cap bail plug, clamp reducer, central guide, suport structure etc. as required & as per typed design complete in all respect.
331	(Note- Axial Length of Reducer without Ring shall be measured with casing pipe)
332	300 mm dia M.S. Pipe
333	200 mm dia M.S. Plain/slotted
334	PEA-GRAVEL (As per IS:4097)
335	1.65 mm to 4.50 mm size Pea gravel of Lalkuwan quarry duly screened, washed and properly stacked at sitefor Tubewell
336	Drilling of bore by rig machine As Per IS:2800(Part I & II):
337	Drilling of bore by 600 mm dia bit GL to 40 mt. BGL.
338	Drilling of bore by 500 mm dia bit from 40 mt GL to 100 mt. BGL.
339	Drilling of bore by 500 mm dia bit 100 m BGL to 140 m. BGL.
340	Lowering of tube well assembly With M.S. rings, Bail Plug, Reducer Including welding:
341	Lowering of 300 mm dia M.S. Housing pipe from GL to 36 m.BGL
342	Lowering of 200 mm dia M.S. Plain/slotted pipe 36 m. BGL to 100 m. BGL
343	Lowering of 200 mm dia M.S. Plain/slotted pipe 100 m. BGL to 126 m. BGL
344	Development of tube well by 250 PSI air compressor and 3 cusec O.P. Unit to yield sand free discharge.
345	Development and testing of tube well by Air Compressor.
346	Development and testing of tube Well O.P.Unit to yield sand free Discharge.
347	Chemical and Bacteriological
348	test (Analysis of water sample)
349	Logging of borehole by departmental/approved electric logger
350	SITC OF PUMPING PLANT AND STABILIZER FOR ZONE 4
351	Supply, Installation, testing and Commissioning of 2000 lpm , 52 mtr Head Pumping Plant including 24 met coloumn pipe, NRV,CI D/F Bend 90 deg., CI A/F Tee, D/F pipe (1.5 met long-2 Nos and 1 met long- 1 No ), Earthing, Painting,Toolset, wiring of pump house (with internal&external electrification),chainpully block and all pumping plant accessories with nut bolts and rubber packing etc.
352	SITC of 150 mm dia size motor operated actuators with metal sheeted sluice valves
353	Soft starter for above pumpset with RS 485 Port-400V Class for above pumpset
354	SITC of 60 KVA stabilizer for above pumpset
355	SITC of equipments for the items as given below :
356	Pressure transmitter
357	Misc. Items such as Protection Ring, Cutout, Electric resistance Rubber sheet, Transformer oil etc.-2019
358	Coloumn Pipe 5 mtr long
359	SITC OF SCADA /AUTOMATION WORK OF REBORE PUMPING PLANT FOR ZONE 4
360	CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog anddigital parameter and features as specifeid for tubewell to store and transmit data on GSm backbone RTU/PLC designed with logic to transfer data at multiple statiuonas specifeid.
361	GSM/GPRS based wireless communication with 4G modem for RTU/PLOc capable to transfer & gather data from remote site to controlstation all accessoreis included with signalenhancer antenna made for pumping plant internet charges as specifeid
362	CE/UL certifeid Intelligent Smart Energy Meter
363	CE/UL Certifeid Electromagnetic Flow Meter 150 mm size
364	auto Phase reversal unit of 250 amp rating with inbuilt delay and enclosure control panel etc.
365	CE/UL certifeid Surge Protecter for control panel.
366	CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters
367	Complete cabling including power cables of all equipment.
368	control panel with IP54 protection ,industrial grade for all equipments.separate for control (24V) and power equipment with capacitor bank panel to improve power factor.
369	Installation, commissioning & testing trial for tubewell
370	SITC OF AUTOMATIC CHLORINATION SYSTEM FOR REBORE TUBEWELL OF ZONE 4
371	Automatic Chlorination System compatible to SCADA system
372	SITC OF EXISTING OHT AUTOMATION SYSTEM AT ZONE-4
373	CE/UL certifeid Radar Type level transmitter for OHT.
374	Actuator of 400 mm dia size with metal sheeted sluicevalve
375	CE/UL certifeid Electromagnetic Flowmeter 400 mm size
376	Installation, commissioning & testing trial for OHT
377	SITC of UPS 10 kva 3phase suitable for operation of Actuators installed at outlet line in case of Power Failure at time of Distribution water supply
378	Lighting at Water works campus with solar panel and LED light of 1 set
379	SITC OF STABILIZER AND OTHER REQUIRED E&M EQUIPMENTS AT EXISTING TUBEWELL OF ZONE 4
380	Soft starter for above pumpset with RS 485 Port-400V Class for above pumpset
381	SITC of 60 kva stabilizer
382	Pressure transmitter
383	Internal electrification of pump house
384	CE/UL certifeid Actuator with new metal sheeted valves
385	SITC OF SCADA /AUTOMATION WORK OF EXISTING PUMPING PLANT FOR ZONE 4
386	CE & UL Certifeid PLC/RTU in IP 54 enclousure suitable to communicate with GSM based modem unit with CPU and power supply with analog anddigital parameter and features as specifeid for tubewell to store and transmit data on GSm backbone RTU/PLC designed with logic to transfer data at multiple statiuonas specifeid.
387	GSM/GPRS based wireless communication with 4G modem for RTU/PLOc capable to transfer & gather data from remote site to controlstation all accessoreis included with signalenhancer antenna made for pumping plant internet charges as specifeid
388	CE/UL certifeid Intelligent Smart Energy Meter
389	CE/UL Certifeid Electromagnetic Flow Meter 150 mm size
390	auto Phase reversal unit of 250 amp rating with inbuilt delay and enclosure control panel etc.
391	CE/UL certifeid Surge Protecter for control panel.
392	CE/UL Certifeid 7 hmi touch screen suitable to communication with PLC/RTU for display & control of process parameters
393	Complete cabling including power cables of all equipment.
394	control panel with IP54 protection ,industrial grade for all equipments.separate for control (24V) and power equipment with capacitor bank panel to improve power factor.
395	Installation, commissioning & testing trial for tubewell
396	SITC OF AUTOMATIC CHLORINATION SYSTEM FOR EXISTING TUBEWELL OF ZONE 4
397	Automatic Chlorination System compatible to SCADA system
398	SITC OF CHLORINE ANALYZER FOR ZONE 1, 2 & 4 OHT
399	Supply, Installation, Testing & Commissioning of Chlorine analyser with MODBUS RTU as per given specification a) FRC sensors(range 0-5ppm)b) Analyzer with RS 485 O/P
400	TRIAL RUN OFTHREEMONTHS FOR ALL ZONE
401	Three months trial run of electro mechanical work with Expenditure on hypo chloride solution,Chaukidar, watch & ward etc for whole scheme
402	SITC OF ELECTRO MECHANICAL EQUIPMENTS ATLOCAL CONTROL STATION
403	CE/UL & BIS Certified industrial grade LARGE SIZE LED MONITOR with lates configuration as per specification.
404	Desktop/PC with i5/i7 processor for as per spec mentioned in tachnical bid documents.
405	CE/UL Certified 3 KVA UPS with batteries as perspec mentioned in tachnical bid documents.( 1 No.For LCS and 4 Nos for tubewells which are not constructed in OHT Campus)
406	Full development version of required TAGS SCADA Software with coustomization of software for LCS as per spec mentioned in tachnical bid documents.
407	GSM based wireless/Broadband/Equivalent communication system for PLC capable to transfer & receive data & gather data form remote sites to control station,All accessories include signal enhancer antenna along with running expences till DLP.
408	CE/UL certified Firewall for network protection.
409	Surge protector for eternet communication protection.
410	industrial grade Ethernet Switch.
411	canon/hp Laser printer1018 or equivalent
412	Installation,Commissioning ,testing including required furniture,internal wiring,PVC panelling of walls/false ceiling work and Split A/C .
413	Security Survelliance IP Camera with required hard drive to store data of atleast 15 Days
414	Trial run charges for LCS for 3 months
415	Granting permission Charges for crossing of Moradabad-Bareilly Railway line from railway

Also Visit

Tenders

Uttar Pradesh Tenders

Construction Tenders

Fencing Work Tenders

Wall Construction Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Milak Nagar Palika Parishad Reorganization Water Supply Scheme To The Ulb Milak Supply Of All Materials Labour T And P Etc For Construction Of Over Head Tank Pump House Scada Room Cum Lab Staff Quarter Boundary Wall With Gate Site Development S, Milak-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Milak Nagar Palika Parishad Reorganization Water Supply Scheme To The Ulb Milak Supply Of All Materials Labour T And P Etc For Construction Of Over Head Tank Pump House Scada Room Cum Lab Staff Quarter Boundary Wall With Gate Site Development S, Milak-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us