|
| 1 | Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15cm thick (below or above GL) including removing rubbish off the premises complete all as specified and directed. |
| 2 | M & L for PCC 1:3:6type C by using (20mm graded aggregate) 50mm thick as in plinth protection/path,floor sub-base etc.including finished the surface smooth and even without using extra cement laid in pannels complete all as specified and directed. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 4 | M&L for25 mm thick PCC1;2;4 type B-2 using 20 mm graded stone aggregate as in base for laying of floor tiles complete all as specified and directed. |
| 5 | M&L for75 mm thick PCC1;2;4 type B1 using 20 mm graded stone aggregate as in base for laying of floor tiles complete all as specified and directed. |
| 6 | M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles complete all as specified and directed. |
| 7 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding .18 sqm, in floors etcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed. (Make; Kajaria/ Orient/ Bell/ Johnson/ Somany). |
| 8 | Material and Labour non skid colouredceramic tiles 300 x 300 x 6 mm in floors set and jonted in neat cement slurry and pointed in coloured / white cement to match complete all as specified and as directed by engr-in-charge. |
| 9 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding .38 sqm, in floors etcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed. (Make; Kajaria/ Orient/ Bell/ Johnson/ Somany). |
| 10 | Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles notexceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed inwhite or coloured cement to matchcompleted all as specified and directed. |
| 11 | M&L, glazed ceramic coloured tiles joint free of size 350x 250x 7mm/ 450X 350X 7mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles, complete all as specified and as directed. |
| 12 | M&L for Chequered cement concrete tiles 200x200x25mm etc. setand jointed and pointed in neat cement slurry in floor with grey cement and pigment including 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes all as directed. |
| 13 | M&L Sand filling under floors in foundations including watering and consolidation complete all as specified. |
| 14 | Machine pressed precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement andpigment comlete all as secified and directed by Engr-In-Charge. |
| 15 | M&L forProviding, cement concrete type B1 (1:2:4) using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges |
| 16 | Dismantling framed worktimber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 17 | M& L for cleanswan Second class hard-wood scantlings with framed work complete all as specified and directed. |
| 18 | Preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated withtwo coats of creosote oil etc complete. |
| 19 | Dismantling of wall and ceiling boardsor insulation boards any thickness, including cover fillets complete all as specified and directed. |
| 20 | Supply and fixed 6mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to walls etc complete all as specified and directed. |
| 21 | M&L For Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 22 | M & L For 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing |
| 23 | Supply and fixed 4mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed. |
| 24 | M&L for preparation ofply wood and wood based materials over 10 Cmwidth and girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 25 | M&L for2nd class hard wood plain fillets, square, rectangular or triangular in section exc 3 but not exc 6 sqcm, wroughtsecured with nails or brads complete all as specified and directed. |
| 26 | Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed. |
| 27 | S & F 0.63 mm thick galvanised corrugated steel sheeting with two corrugation side lap fixed with L type or J type or cranked hooks, bolts with grade of zinc coating 275 complete all as specified. |
| 28 | S & F plain galvanised MS sheet sheeting 0.5 mm thickin ridges ,valley gutters, hips with grade of zinc coating 275.(Make:TATA/Sail/ Jindal) |
| 29 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws as specified and directed. |
| 30 | S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 31 | M & L for preparing new galvanised surfaces to receive painting by coating with mordent solution including washing and cleaning and applying two coats of red oxide roof paint( using Corrugal)over 10 cm width or girth on steel surfaces complete all as specified and directed. |
| 32 | S & F in rep Vitreous China Squatting pan \"Orissa pattern\" size 580 x440 mm white with integral foot rest including lime concrete beddingcomplete all as specified and directed. |
| 33 | S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 34 | S&F for PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 35 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 36 | S&F in repairs PVC valveless, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 37 | Demolition and breaking up drain pipes 150mm SWG pipe, set in cement mortar complete all as specified and directed. |
| 38 | S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 39 | S&F PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 40 | S&F PVC (SWR) bend 110 mm dia. |
| 41 | S&F PVC (SWR) bend 75 mm dia. |
| 42 | S & F vitreous china wash basin white flat back of size 550mm x 400mm including 15mm dia PTMT pillar tap, PTMT waste coupling 32mm, chain and plug and PVC waste pipe including CI brackets, etc. complete in repairsall as specified and directed by Engineer-in-Charge |
| 43 | S&F in repairs vitreous china wash down water closet pan, \"Pedestal\" white, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed. |
| 44 | S&F in repairs,pillar taps,CP 20 mm dia cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 45 | S&F in repairs fancy type chromium plated bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore complete all as specified and directed. |
| 46 | S&F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed. |
| 47 | S&F Stainless steel sink with drainage board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 48 | M & L for Cleaning and removing all dirt and scale etc from tank and from the mouths of circulating pipes for the tanks n.exc. 500 Ltrs complete all as specified and directed. |
| 49 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm complete all as specified and directed. |
| 50 | All as per item 68above but area n.exc 1.50 Sqm complete all as specified and directed. |
| 51 | S&F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 52 | S & F 2nd class hard wood plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer 30mm thick complete all as specified and directed. |
| 53 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc complete all as specified and directed. |
| 54 | Supply and fix MS butt hinges medium weight, cold rolled 100mm size complete all as specified and directed. |
| 55 | Supply and fix MS butt hinges medium weight, cold rolled 75 mm size complete all as specified and directed. |
| 56 | Supply & fix Aluminium anodisedbarrel tower bolt 150 mm long of extruded section etc complete all as specified and directed. |
| 57 | Supply & fix Aluminium anodisedbarrel tower bolt 100 mm long of extruded section etc complete all as specified and directed. |
| 58 | Supply & fix ExtrudedAluminium anodised alloy handles fabricated type 150mm long complete all as specified and directed. |
| 59 | Supply & fix ExtrudedAluminium anodised alloy handles fabricated type 100mm long complete all as specified and directed. |
| 60 | Supply & fix aluminium alloy, anodised, sliding door bolts 250mm size with hasp, staple (bolt type) and fixing clips of sheets , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy andfixed etc complete all as specified and directed. |
| 61 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips .complete all as specified and directed. |
| 62 | S & F sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n exc0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish) |
| 63 | S&F figured glass 4mm thick,pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed. |
| 64 | S&F in repairs aluminium anodised curtain rails 20 mm dia all as specified and directed. |
| 65 | S&F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 66 | S&F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in(Make : Sintex/Polycon /Poly Tap ) |
| 67 | S&F PVC water storage tanks of 2000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified in(Make : Sintex/Polycon /Poly Tap ) |
| 68 | M & L for PCC (1:3:6) type C-2(40 mm graded stone aggregate) mass concrete as inreataining wall,any thickness,size or shape inclu pilasters butterresses,columns,pillars,boundry pillars and postetc complete. |
| 69 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for |
| 70 | M & L PCC 1:2:4type B2, (using 20 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed. |
| 71 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cemenincluding forms, moulds, mi- tred/stopped ends etc. |
| 72 | M&L for Rendering 10 mm thick IN CM 1:6 on fair faces of brick work or concrete surfaces . |
| 73 | Demolition of stone/boulder masonry , built in cement mortar including all quoins,arches,pillars etc ,but excluding ashlar facings dressed stone work and precast concrete articles completed all as specified and directed . |
| 74 | M & L For type C-1 1:3:6 (20 MM GRADED AGGREGATE) Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width andsetting in mortar, complete all as specified and directed. |
| 75 | M&L for Rendering 15 mm thick IN CM 1:6 on fair faces of brick work or concrete surfaces . |
| 76 | M&L for preparingplastered or unplasterd old surface of any description with two coat of white wash on walls surfaces. |
