|
| 1 | Excavation in post hole or similar holes each n.exc 0.50 cum, getting out, returning filling in and ramming earth around in layers n.exc 25 cm, watering and removed surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil complete all as specified and directed. |
| 2 | M&L for cement concrete, (1:3:6), type C-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 3 | M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS: 1161 - 1979 grade St. - 240 complete all as specified and directed. |
| 4 | M&L for plates, plain or chequered, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 5 | M&L for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming toFe-290 Gde-E-165 complete all as specified and directed. |
| 6 | M&L for preparation of new steel surface of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 7 | M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strengthof 550 Mpa as in roofcovering/ cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 8 | M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengthof 550 Mpa as in roofcovering/ cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 9 | M&L for treating cement concrete surface with three dressing of sodium silicate solution complete all as specified and directed. |
| 10 | M&L for roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc complete all as specified and directed. |
| 11 | M&L for brick work old size with sub class \"B\" bricks straight or curved on plan n.exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 12 | M&L for 15 mm thick cement plastering on brick/ concrete surfaces in CM (1:4) finishing surface even and fair without using extra cement complete all as specified and directed. |
| 13 | M&L for pre-cast RCC, (1:2:4), type B-1 (using 20 mm graded stone aggregate) as in cover slabs for manholes or RCC slab, set in cement mortar (1:4) including necessary form work complete all as specified and directed. |
| 14 | M&L for TMT bar, 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified and directed. |
| 15 | M&L for applying two coats of cement base paint over a coat of alkali resistant primer on wall including preparation of new plastered surface complete all as specified and directed. |
| 16 | Supply only integral water proofing compound ISI marked complete. |
| 17 | Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/ dense soil etc complete all as specified and directed. |
| 18 | M&L for hard core using broken stone or boulders n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed. |
| 19 | M&L for 75 mm thick PCC, (1:4:8), type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 20 | Removing excavated soil to a distance exc 250m but n.exc 500 m and depositing where directed complete all as specified and directed. |
| 21 | M&L for providing 100 thick PCC (cement concrete), 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in hard standing/ ramp/ path etc spike rolling to surfaces or making impression of expanded metal, whilst the concrete in green complete all as specified and directed. |
