Tender For Bharat Bhari Nagar Panchayat Water Supply Reorganisation Scheme Siddharthanagar, Construction Of Over Head Tank, Pump House, Staff Quarter, Boundry Wall, Distributation System Of Pipeline, Water Rechaging Unit, Scada Room,New Tube Well Ande&M R, Siddharth Nagar-Uttar Pradesh

TDR : 46557537

Tender Notice
BOQ

Expired

Siddharth Nagar , Uttar Pradesh

Tender Brief : Tender For Bharat Bhari Nagar Panchayat Water Supply Reorganisation Scheme Siddharthanagar, Construction Of Over Head Tank, Pump House, Staff Quarter, Boundry Wall, Distributation System Of Pipeline, Water Rechaging Unit, Scada Room,New Tube Well Ande&M R

Document Fees
₹ 23600 /-

EMD
₹ 2627000.0 /-

Tender Value
₹ 26.27 Crore /-

Submission Date
19-12-2024

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Pump House cum Chloronome (2.5mx3.0mx3.0m)cum (2.5mx1.3mx3.0m) and(3.6mx3.0mx3.0m)cum (1.2mx1.8mx3.0m)
2	Excavation in foundation in ordinary soil (loam, clay or sand) including lift up to 1.5m and lead up to 50m. Filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus earth up to a distance of 50m. from the centre of the foundation trenches.
3	Concrete with 40 mm gauge stone ballast, local sand and cement in proportion(8:4:1) in foundations and floors including supply off all materials, labour T and P etc. required for proper completion of the work.
4	First class brick work in1:6 cement and coarse sand mortar in foundation and plinth with proper curing including supply of all materials labour, T& P etc. required for proper completion of the work.
5	First class brick work in1:4 cement and coarse sand mortar in foundation and plinth with proper curing including supply of all materials labour, T& P etc. required for proper completion of the work.
6	(i) For chamber into PH.
7	As in item 1.03 above but in superstructure includingnecessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1 brick.
8	As in item 1.04 above but in 1:4 superstructure includingnecessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1/2 brick wall.(Above verandha slab)
9	20 mm thick damp proof coursewith cement and approved course sand in 1:2 including 5% water proofing materials of in the proportion as specified for proper complition of the work and including curing and shuttering as necessary.
10	R.C.C work with cement, coarse sand and 20mm gauge approved stone ballast in proportion of 1:1.5:3 in lintels of doors and windows,slab&chhaja excluding supply of reinforcement and itsbending, but including its fixing and binding the same with 0.50mm thick binding wire(to be supplied by the contractor) and including centering and shuttering, supply of all materials, labour, T & P etc. required for proper completion of the work.
11	(i) SLAB
12	(ii) BEAM/LINTAL
13	(iii) CHHAJJA
14	Mild steel or iron work in plain work such as R.C.C. or R.B. work (when not included, in over all rates) ,wrought to required shape as necessary incluiding bending for proper completion of thework incluiding supply of steel and.wastage.
15	Cement concrete with 20 mm gauge approved stone ballast,coarse sand and cement in the propotion of 4:2:1 including supply of all materials labour, T & P etc. required for proper completion of the work.
16	(i)For fixing of r.s. joist/hold fast etc.
17	R.C.C. man holecover (0.850.850.10m.)
18	Supply &fixing of angle iron of size 40405mm door chaukhat including fixing of holdfast &125 mm size heavey duty hinges etc. complete.
19	(i) Size 1.2 2.10 and 0.92.10 or as per direction of engineer-in-charge.
20	Supply &fixing of angle iron of size 40405mm window/ventilator chaukhat with grill including fixing of holdfast &100 mm size heavey duty hinges etc. complete.
21	(i) Size 1.21.50 , 0.90 1.50 and 0.30 * 0.30-06no. as per direction of engineer-in-charge.
22	Supply and fixing of 35 mm thick plywood doorshutter Excluding AL drop tower bolt,handle,silencer & stoper etc. complete.All the accessaries should be heavey duty & approved make & quality.
23	Supply and fix 35mm thick sheesham wood fully Panelledwindows shutters including supply and fixing of wooden cleats and stops and fixing adjustments of hinges bolts locks handles spring and other fittings
24	Providing and fixventilators (as square bar grill) over opening including supply of all materials, labour, T&P etc. required for proper completion of work as per direction of Engineer-in -charge.
25	12 mm thick plaster in 1:6 with cementand coarse sand mortar over brick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work.
26	12 mm thick plaster in 1:6 with cementand coarse sand mortar over rough face of onebrick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work.
27	20mmthick cement plaster in dado or skirting in (1:2) consisting of cement and coarse sand laid in panels finished with 3mm floating coat of neat cement or 1:5 cement and marble dust including supply of all materialslabour T & P etc required for proper completion of the work.
28	Sand filling in plinth including supply of necessary quantity of sand from A distance not exceeding 10 km. from the site of work and including watering, dressing, etc. Rate to include the cost of all materials, labour, T and P etcrequired for proper completion of the work.
29	25mm thick 1:2:4 plain cement concrete floor and appron with cement coarse sand and 20mm gauge stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio1:5 as specified over and including 75mm thick base concrete consisting of cement local sand and 1st class brick ballast 40mm gauge in the proportion of 1:4:8 and removing any overlapping or mortar at the joints of panels if any and giving them uniform finish including supply of all materials labourand T and P etc. required for proper completion of the work.
30	40 mm thick 1:2:4 plain cement concrete floor with cement coarse sand and 20mm gauge stone ballast laid in panels finished with 3 mm floating coat of neat cement or cement and marble dust in ratio1:5 as specified.(without base concrete.)
31	Painting or varnishing new iron work in small areas or new wood work with one coat priming and two coat of approved paint or varnish including supply of all materials, Labour and T & P etc required for proper completion of the work.
32	White washing three coat including supply of all materials labour and T and P etc. required for proper completion of the work.
33	Finishing wall with waterproof cement paint of approved make and quality over one priming coat on new work with two coats, to give an even shade. Including prepration of surface &supply of all matrials labour T&P etc. required for proper completion of the work.
34	Supply of Rolled steel joists complete. Size 225100100mmLength - 2.9m.
35	Supply of Rolled steel joists complete. Size 225100100mmLength - 3.4m.
36	Fixed in position item no 1.33 excluding cost of joists but including all labour in handling and hoisting etc. complete.Size 225100100mm & Length - 2.90m.
37	Fixed in position item no. 1.34excluding cost of joists but including all labour in handling and hoisting etc. complete.Size 225100100mm & Length - 3.4m.
38	Supply and fix 100 mm dia. A.C. down pipe complete with rose heads bands with eye hole and groutings etc fixed to walls with suitable clamps .
39	Supply & Fixing of oxidized stainless steelfitting for door& window (AL drop tower bolt,handle,silencer & stoper etc.).
40	Anti termit treatment in foundationincluding supply off all materials, labour T and P etc. required for proper completion of the work.
41	Repairing & painting of Existing Pump House of Size (3.00 x 3.60 ) cum Chlorinating roomof size ( 1.2 x 1.8 ) . all releated work completion as per direction of Engineer in chargeincludingall material, labour,T&P etc.required for proper completion of work .
42	BY PASS CHAMBER
43	Excavation in foundation in ordinary soil (loam, clay or sand) including lift up to 1.5m and lead up to 50m. Filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus earth up to a distance of 50m. from the centre of the foundation trenches.
44	Concrete with 40 mm gauge stone ballast, local sand and cement in proportion(8:4:1) in foundations and floors including supply off all materials, labour T and P etc. required for proper completion of the work.
45	I First class brick work in1:6 cement and coarse sand mortar in super structure with proper curing including supply of all materials labour, T& P etc. required for proper completion of the work
46	25mm thick 1:2:4 plain cement concrete floorwith cement coarse sand and 20mm gauge stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio1:5 as specified over and including 75mm thick base concrete consisting of cement local sand and 1st class brick ballast 40mm gauge in the proportion of 1:4:8 and removing any overlapping or mortar at the joints of panels if any and giving them uniform finish including supply of all materials labourand T and P etc. required for proper completion of the work.
47	20mmthick cement plaster in dado or skirting in (1:2) consisting of cement and coarse sand laid in panels finished with 3mm floating coat of neat cement or 1:5 cement and marble dust including supply of all materialslabour T & P etc required for proper completion of the work.
48	12 mm thick plaster in 1:6 with cementandl ocal sand mortar over rough face of onebrick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work.
49	Boundary wall approach road etc
50	Excavation in foundation in ordinary soil (loam, clay or sand) including lift up to 1.5m and lead up to 50m. Filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus earth up to a distance of 50m. from the centre of the foundation trenches.
51	Concrete with 40 mm gauge stone ballast, local sand and cement in proportion(8:4:1) in foundations and floors including supply off all materials, labour T and P etc. required for proper completion of the work.
52	I First class brick work in1:6 cement and coarse sand mortar in foundation and plinth with proper curing including supply of all materials labour, T& P etc. required for proper completion of the work
53	20 mm thick damp proof coursewith cement and approved course sand in 1:2 including 5% water proofing materials of in the proportion as specified for proper complition of the work and including curing and shuttering as necessary.
54	As in item 4.03above but in 1:4 superstructure includingnecessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1/2 brick wall.(Above verandha slab)
55	12 mm thick plaster in 1:6 with cementand coarse sand mortar over brick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work.
56	12 mm thick plaster in 1:6 with cementand coarse sand mortar over brick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work for pillar face.on rough surface.
57	Finishing wall with waterproof .Cement paint of approved make and quality over one priming coat on new work with two coats, to give an even shade. Including prepration of surface &supply of all matrials labour T&P etc. required for proper completion of the work.
58	Supply of fixing of 3.6 m wide gate including construction of pillars as per departmental type design including if all material, labour,T&P etc.required for proper completion of work
59	Construction of 80mm thick c.c. coloured interlockingpavers tiles with30mm thick fine sand bed over 100mm thick 1:6:12 C.C. basewith proper slope and camber including all material labour, T&P etc.required for proper completion of work.
60	Provision for aboroculture for all zone water works compound includingall material, labour,T&P etc.required for proper completion of work .
61	Repairing & painting of Existing Boundry wall in Zone-1 all releated work completion as per direction of Engineer in chargeincludingall material, labour,T&P etc.required for proper completion of work .
62	Provide all materials, labour, T and P etcrequired for proper completion of the work including leveling dressing exacavation of filling of earth where necessary for devolopment of water works sites including carriage of earth from distance of about 8 km.
63	Distrbution system,Rising main
64	Excavation for pipe line trenches including lift upto 1.50m and lead upto 50 m and refilling, watering, ramming of excavated earth in to trenches as per direction of engineer-in charge.
65	Supply,laying in true to alignment & gradient in trenches and testing of the following size and type of pipes with coupler,specials and all jointing materials such as solvent cement rubber rings etc.including F.O.R. destination, insurance and with loading, unloading and stacking etc. complete.
66	D.I.-K-9 (Rising Main)
67	dia- 80 MM
68	dia- 100 MM
69	dia- 150 MM
70	dia- 200 MM
71	D.I.-K-7
72	350mm
73	300mm
74	250mm
75	H.D.P.E PIPE
76	(i) 200mm
77	(ii) 160mm
78	(iii) 140mm
79	(iv) 110mm
80	(v) 90mm
81	Supply and fixing in position including supply of jointing materials such as nuts-boalt, rubber insertion white lead,valves and specials required etc. completeof the following size of C.I.D./F. Sluice valves, scour valves,20mm dia scewed down type air valve and fire hydrant containing80mm dia sluice valve and its accesories as per latest I.S. specification including F.O.R. destination, all taxes and insurance etc. complete for proper completion of work.
82	Sluice valve
83	350 mm dia
84	300 mm dia
85	250 mm dia
86	200 mm dia
87	150 mm dia
88	125 mm dia
89	100mm dia
90	80 mm dia
91	65 mm dia
92	Scour valve
93	80 mm dia
94	Air valve
95	20 mm dia
96	Firehydrant
97	Supply of all materials, labour,T&P etc.complete forconstruction of following chamber as per department type design.
98	Sluice valve chamber (masonary Type)
99	Sluice valve chamber (surface box Type)
100	Fire Hydrant
101	Air Valve Chamber
102	Scour Valve Chamber
103	Dismanting of Following type of surfaces including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto a distance of 50 m.
104	(i) C.C.Road
105	(ii) Bituminous surface
106	(iii) B.O.E. Surface
107	(iv) Interlocking Surface
108	Provision for crossing of nalas, road, culvert and embankments (bundhs) etc. including shifting of telephone cables etc.along the alignement of pipe line including supply of C.I.Tyton pipes and specials,and their laying and jointing testing etc.complete .
109	i-Nala Crossing/culvert crossing
110	ii-Road Crossing through trenchless technique (80mm to 150mm)
111	iii-Road Crossing through trenchless technique (200mm to 350mm)
112	Reinstatement of above dismentalled road surface with old and new materials including supply of all materials, labour, T&P etc. required for proper completion of the work.
113	i-C.C.Road
114	ii-Bituminous surface
115	iii-B.O.E. Surface (Assuming 50% new brick and 50% old bricks used)
116	iv-Interlocking Surface (Assuming 50% new brick and 50% old bricks used)
117	Interconnection of new pipeline with existing pipeline including trenching,jointing,testing etc complete.
118	Making house connection with 20mm(OD) HDPE / AC/D.I. pipe main with Supply,Carting ,laying , jointing and fixing of the 15 mm (OD) G.I. pipe ,I.S.I. Mark Gunmetal Ferrul , I.S.I. Mark saddle/clamp of required size, C.I. bib kock of approved quality, J-Hook or M.S.U-clamp, 25cmX25cmX25cm C.C grouting of unsupported G.I. pipe all connection in inside thehouse and support on wall with suitable clampas perdirected by engineer-in chargeincluding cost of all jointing material, specials, labour, testing andT&P etc. complete.
119	R.C.C. with cement, coarse sand & 20 mm gauge stone ballast in proportion of 1:1.5:3 in thrust blocks of pipe line excluding supply of reinforcement & its bending but including its fixing & binding the same with 0.50 mm thick binding wire in position & necessary centering & shuttering including curing and supply of all materials, labour, T & P etc. required for proper completion of the work.
120	Mild steel or iron work in R.C.C. wrought to required shape as necessary including bending for proper completion of the work including supply of steel & wastage etc.
121	OHT
122	Supply of all materials labour T&P etc. for complete construction of R.C.C. Over Head Tank following typeCapacity andstaging above ground level with main components, including cost of soil testing and assuming bearing capacity of soil as 8 MT, with supply of design and drawings.All the water retaining components of OHT shall be casted in M-30 concrete and minimum grade of concrete of foundation and staging should be M-25 with approved cement, coarse sand and stone grit as per I.S. 11682 and I.S.456.Seismiceffects and wind load should be taken into consideration as per I.S. 1893 for earthquake resistance and I.S. 875 part-III for wind load on structure and including 1M wide RCC staircase, 1 m wide R.C.C. M25 balcony, M.S. ladder made of 50x50x6 mm angle section and 20mm plain M.S. bars with hand rails of 20mm medium class G.I. pipes, One aluminum ladder inside the tank from top dome to bottom dome, railing with 20mm dia medium class G.I.pipe (in 3 rows) on both sides of stair case,bolcony and top dome, supported on 50x50x6mm M.S. angle section, spaced at intervals not more than 1.5m, Proper ventilator at top dome in circular shape of 1.2 m dia, Water level indicator fabricated with sensor connecting to automation, Lightening conductor as per I.S.S.2309 or its latest amendments of latest electricity rules, consisting of proper elevation rod with 5 or more fork points as prescribed in ISS 2309-1969 and ISS 3013-1966, C.I. manhole of min 60x60cm size with locking arrangement, Supply, fixing, jointing of C.I.D/F Pipes of appropriate size with C.I.D/F specials conforming to IS 8329/2000 as vertical pipes for inlet, outlet, overflow and washout as per latest / relevant I.S. specificationswith all jointing materials for proper completion of work,Supply and Fixing of appropriate size manually operated D/F Sluice Valve / Butter Fly Valves as per ISS 700/1969 or its latest amendments class “A” working pressure 10 Kg/cm2, Construction of bed blocks in 1:2:4 PCC with cement, coarse sand and approved stone grit , Construction of washout / overflow chamber and chambers for sluice / butter fly valves as per departmental type design and drawing, Supply of 200 mm dia PVC pipe as per I.S.-4985/2000 for disposal of water from overflow and washout chamber to suitable point outside the water works compound.Supplyand fixing of 1.8 m hight M.S. Gate in staire case at 2nd fligth as per direction of engineer -in-charge. Painting of all concrete surface and steel pipe works with water based exterior paint of approved make and quality as mentioned in tender documentover one priming coat on new work with two coats, to give an even shade and anticorrosive paints including prepration of surface &supply of all matrials labour T&P etc. required for proper completion of the work. AS PER DIRECTION OF EIC
123	(i)ZONE-5 -400KL Capacity 22 M staging
124	(i)ZONE-6 -550KL Capacity 22 M staging
125	(i)ZONE-7 -350KL Capacity 22 M staging
126	(i)ZONE-8 -300KL Capacity 20 M staging
127	(i)ZONE-9-600KL Capacity 22 M staging
128	Supply of 200mm dia P.V.C. Pipe as per letest /revlent I.S.specification including all taxes and insurance etc.F.O.R. destination for disposal of water from overflow and washout chamber to suitable point outside the water works compound including excavation of trenches.laying of pipe line etc.complete.
129	Repairing & painting of existing Over Head Tank of 100KL, 12 M stagingall releated work completion as per direction of Engineer in charge including supply of all material, labour, T&P etcproper completion of work .
130	Repairing & painting of existing Over Head Tank of 300KL, 16 M stagingall releated work completion as per direction of Engineer in charge including supply of all material, labour, T&P etcproper completion of work .
131	Repairing & painting of existing Over Head Tank of 250KL, 14 M stagingall releated work completion as per direction of Engineer in charge including supply of all material, labour, T&P etcproper completion of work .
132	Repairing & painting of existing Over Head Tank of 350KL, 18 M stagingall releated work completion as per direction of Engineer in charge including supply of all material, labour, T&P etcproper completion of work .
133	Repairing & painting of Existing Staff Quarterin zone-1 Water works campus including supply of all labour, material, T&P etc complete.
134	Construction of water recharging unit with water taping arrangement from roof and ground water recharging unitas perdirected by engineer-in charge including all material labour t&p etc. proper completion of work .
135	SCADA ROOM
136	Excavation in foundation in ordinarysoil (loam,clayorsand)includingliftupto1.50 m& lead up to 50 m,refilling,wateringandramming ofevcavatedearthintothetrenchesorspace betwwen the building and sides of foundation trenches or into the plinth and disposal of surplus earth up to the distance of 50 mfrom the center of the foundation trenches.
137	Concretewith40mmgaugestone ballast,local sand and cementin proportion in 8:4:1infoundation includingsupplyofall material,labourT &Petc.requiredforproper completion of work.
138	Ist. Class brick work in 1:6 cementand local mortar in foundation and plinth including supply of allmaterial,labourT&Petc.requiredforproper completion of work.
139	20 mm thick D.P.C.with cement and approved coarse sand 1:2 including 5% water proofing materialor inproportion as specied by themanufacturesincludingsupplyofall material,labourT &Petc.requiredforproper completion of work.
140	Ist. Class brickwork in 1:6 cementandlocalmortarinsuperstructure including supply of allmaterial,labourT&P etc.required for proper completion of work.Ist.
141	As in item 11.05 above but in 1:4 superstructure includingnecessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1/2 brick wall.
142	Supply and fixing of M.S. angle iron chaukhatsof50mmx 50mm x 6mmwith M.S. sheet door shutter including simple moulding straightg work as in chaukhats and also supply of allmaterial,labourT&Petc.requiredforproper completion of work.
143	Fixingofholdfastofdoorsandwindows chaukhats already moulded on chaukhats inP.C.C.1:2:4etc.requiredinallrespectto complete the work.
144	R.C.C. work with cement,coarse sand and 20 mm gauge approved stone ballast in proportion of1:1.50:3insunshedandlintelondoorsand windows excluding supply of reinforcement and its bendingbutincludingitsfixingandbindingthe samewith0.50mmthick binding wire and the costofbinding wire and including necessary centeringandshutteringsupplyofall material,labour T&P etc. required for proper completion of work.
145	LINTAL/BEAM
146	SLAB/CHAJJA
147	Mild steel or iron work in plain work such as R.C.C. or R.B. work (when not included, in over all rates) ,wrought to required shape as necessary incluiding bending for proper completion of thework incluiding supply of steel and.wastage.
148	SupplyandfixingofZ-Sectionsection window framesandShuttersopenableoutsideas per drawinganddesignapprovedbyE/I,hingesof approvedquality,M.S.orC.I.handles,holdfast4 nos of M.S. flat25x5 mm and 150 mm long, pegs ofM.S.30cmlonghaving4holeswithpagester and brackets welded orriveted toframe completeincludingthecostofGlassPanes& includingsupply of all material,labour T&Petc. required for proper completion of work.
149	12 mm thick plaster in 1:6 with cementand coarse sand mortar over brick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work.
150	Sameasitemno 11.15butin proportion1:4withcement andlocal sand mortar over ceiling.
151	25mm thick 1:2:4 plain cement concrete floor and appron with cement coarse sand and 20mm gauge stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio1:5 as specified over and including 75mm thick base concrete consisting of cement local sand and 1st class brick ballast 40mm gauge in the proportion of 1:4:8 and removing any overlapping or mortar at the joints of panels if any and giving them uniform finish including supply of all materials labourand T and P etc. required for proper completion of the work.
152	Same as item no 11.16 but in Apron.
153	Supply and fix 3 mm glass strips in position includingsupplyofallmaterial,labourT&Petc. required for proper completion of work.
154	Paintingorvarnishingnew workornewwoodworkinsmallareaswithone primingcoatandtwocoatofapprovedquality paint or varnish including supply of all material,labourT &Petc.requiredforproper completion of work.
155	Finishing wall with waterproof .Cement paint of approved make and quality over one priming coat on new work with two coats, to give an even shade. Including prepration of surface &supply of all matrials labour T&P etc. required for proper completion of the work.
156	115mmstringordripcoarseofIst.Class brick in 1:6 cement and local sand mortar including plastering, cutting drip notch as required andincludingsupplyofallmaterial,labourT&P etc. required for proper completion of work.
157	Sandfillinginplinthin including supply of all material,labour T & P etc.requiredfor proper completion of work.
158	Supplyandfixingoffanhooksboxtype includingsupply of all material,labour T&Petc. complete.
159	Provisionforinternalelectrificationincludingsupply of all material,labour,T&P etc. complete.
160	Provision for water supplyand sanitaryworks including supply of all material,labour,T&Petc. complete
161	E/M WORKS
162	ZONE-I
163	CONSTRUCTION OF TUBEWELL
164	Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c.
165	Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .
166	O.P.Unit
167	Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .
168	Drilling of Bore
169	Logging of bore hole by departmental/approved electric logger.
170	Drilling of 500mm dia bore from G.L. to 60m BGL.
171	Drilling of 450mm dia bore from 61m BGL to 100m BGL.
172	Drilling of 450mm dia bore from 100m BGL to165m BGL.
173	TUBEWELL ASSEMBLY
174	200mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect .
175	150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect.
176	LOWERING OF T/W ASSEMBLY
177	Lowering of 200mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 150m BGL.
178	Lowering of 200mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL.
179	Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL.
180	Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL.
181	PEA-GRAVEL
182	Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site.
183	DEVELOPMENT OF TUBE WELL
184	Development of tube well by 250 PSI air compressor
185	Development of tube well by 250 PSI air compressor
186	Development of tube well by 3 cusec O.P. Unit
187	Development of tube well by 3 cusec O.P. Unit.
188	TEST
189	Chemical and bacteriological test.
190	Pumping plant and Other instrumentation work
191	150 LPM, 40 m head 2900rpm,03 H.P. submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989)
192	SITC of Main piping & Valves (80 mm size) with 24 mtr. Column pipe, Electronic type Chlorinating plant Power wiring, earthing, Painting , Tools sets, wiring of pump house (internal & External) Chain Pulley block and gauges complete in all respect with allrequired material, T&P labour.
193	SITC of of 10 KVA Servo Voltage stabilizer or as per requirement (Input Voltage 230V±450V) to Output Voltage 415±1% As per IS 9815-1994.
194	Soft Stater with RS485Port- 400 V Class,
195	CE/UL Certified Intelligent Smart Energy Meter
196	Motor operated Actuator for without Sluice Valve of size upto 150 m
197	Electro magnetic flow meter upto150mm.
198	CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell
199	CE/UL Certified Pressure Transmiter .
200	Suitable capacity of booster pump with all accessories. Increase terminal Head upto 12 Meter.
201	SCADAAUTOMATION OF (NEW TUBEWELL and OLD Tubewell)
202	SCADAAUTOMATION ITEMS
203	CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement.
204	G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.
205	CE/UL certified 7\" HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters.
206	CE/UL Certified Surge protector for control panel
207	Complete cabling for all equipments at pump house
208	Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment).
209	Installation, commissioing & testing for one tubewell
210	Trial Run for 3 month period for one tubewell
211	Instrumentation Item for(OLD) Existing Tubewell
212	Motor operated Actuator for without Sluice Valve of size upto 150 m
213	Electro magnetic flow meter upto150mm.
214	CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell
215	CE/UL Certified Pressure Transmiter .
216	CE / UL certified Intelligent smart energy meter
217	Soft Stater with RS485Port- 400 V Class,
218	SITC of of 7.5 KVA Servo Voltage stabilizer or as per requirement (Input Voltage 230V±450V) to Output Voltage 415±1% As per IS 9815-1994.
219	Master control station (MCS)
220	SCADA DISPLAY
221	CE/UL & BIS Certified industrial gradeLED MONITOR with latest configuration as per specification.
222	(i) 65\"\"LED MONITOR With latest configuration
223	CE/UL/&BIS certified industrial grade large video screen(LVS)with latest configuration of LED type LFD ad per specificatio, MATRIX of 55\"\" each panel.
224	(I)2x2 Matrix (4 panel)
225	Video wall media player of same OEM.
226	Desktop/PC with i5/i7 prosessor for as per spec mentioned in technical bid document.
227	CE/UL Cerfified 5 KVA UPS with batteries as per spec mentioned in technical bid document.
228	Full development version of reqrired TAGS SCADA Software with counstomization of software for MCS as per requirement as per spec mentioned in technical bid documents.
229	CE/UL certified master control room PLC with redundant CPU & power supply at MCS in IP54 enclouser as spec mentioned in technical bid documents.
230	EC/UL certified Field gateway agent for transfering data from MCS to Central control room.
231	GSM based wireless/Broadband/Equipment communication system for PLC capable to tranfer & received data & gather data from remote sited to control station, All accessoried included signal enhancer antenna along with running expences till DLP.
232	CE/UL Certified Firewall for network protection.
233	SURGE PROTECTOR FOR ETHERNET communication protection.
234	CE/UL certified industrial grade Ethernedt Switch
235	Mobile App Facility system architecture (industries internet baded & viewed through mobile apps for increased local & Remote Visibility).
236	Canon/HP or eqrivalent Laser Printe 1018 or equivement.
237	Security Surveillance IP camera with recorded (optional).
238	Installation, Commissioning & testing inclidung required funiture, A/c etc.
239	Trial run for 3 month period.
240	Automation of OHT
241	Motor operatedActuator without Sluce valve 160mm Size
242	Electromagnetic Flowmeter of 160mm Size
243	CE/UL Certified Radar type level transmittor for OHT
244	Three Month Trial & Run for 03 Month
245	ZONE-II
246	Transportation
247	Rig Machine
248	Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c.
249	Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .
250	O.P.Unit
251	Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .
252	Drilling of Bore
253	Logging of bore hole by departmental/approved electric logger.
254	Drilling of 500mm dia bore from G.L. to 60m BGL.
255	Drilling of 450mm dia bore from 61m BGL to 100m BGL.
256	Drilling of 450mm dia bore from 100m BGL to165m BGL.
257	TUBEWELL ASSEMBLY
258	200mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect .
259	150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect.
260	LOWERING OF T/W ASSEMBLY
261	Lowering of 200mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 150m BGL.
262	Lowering of 200mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL.
263	Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL.
264	Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL.
265	PEA-GRAVEL
266	Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site.
267	DEVELOPMENT OF TUBE WELL
268	Development of tube well by 250 PSI air compressor
269	Development of tube well by 250 PSI air compressor
270	Development of tube well by 3 cusec O.P. Unit
271	Development of tube well by 3 cusec O.P. Unit.
272	TEST
273	Chemical and bacteriological test.
274	Pumping plant and Other instrumentation work
275	SITC of 350 LPM, 44 m head 7.5 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates.
276	SITC of Automatic chlorination system SCADA Compatable chlorinating system.
277	Misc item such as protection ring, MCCB, Transformer oil, electric resistance, rubber sheet, 25 sqmm ormad cable and construction of canopyas per site requirement for protection of electronic device and safety purpose and nut bolts, rubber packing for extra/spare column pipe.
278	Supply & Erection of Servo Stabilizer of 15 KVA
279	Soft Stater with RS485Port- 400 V Class,
280	CE/UL Certified Intelligent Smart Energy Meter
281	Motor operated Actuator for with Sluice Valve of size upto 150 m
282	Electro magnetic flow meter upto150mm.
283	CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell
284	CE/UL Certified Pressure Transmiter .
285	SCADAAUTOMATION OF (NEW TUBEWELL and OLD Tubewell)
286	SCADAAUTOMATION ITEMS
287	CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement.
288	G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.
289	CE/UL certified 7\" HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters.
290	CE/UL Certified Surge protector for control panel
291	Complete cabling for all equipments at pump house
292	Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment).
293	Installation, commissioing & testing for one tubewell
294	Trial Run for 3 month period for one tubewell
295	Instrumentation Item for(OLD) Existing Tubewell
296	Motor operated Actuator for without Sluice Valve of size upto 150 m
297	Electro magnetic flow meter upto150mm.
298	CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell
299	CE/UL Certified Pressure Transmiter .
300	Soft Stater with RS485Port- 400 V Class,
301	SITC of of 15 KVA Servo Voltage stabilizer or as per requirement (Input Voltage 230V±450V) to Output Voltage 415±1% As per IS 9815-1994.
302	Automation of OHT
303	Motor operatedActuator without Sluce valve 200mm Size
304	Electromagnetic Flowmeter of 200mm Size
305	CE/UL Certified Radar type level transmittor for OHT
306	Three Month Trial & Run for 03 Month
307	ZONE-III
308	Transportation
309	Rig Machine
310	Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c.
311	Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .
312	O.P.Unit
313	Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .
314	Drilling of Bore
315	Logging of bore hole by departmental/approved electric logger.
316	Drilling of 500mm dia bore from G.L. to 60m BGL.
317	Drilling of 450mm dia bore from 61m BGL to 100m BGL.
318	Drilling of 450mm dia bore from 100m BGL to165m BGL.
319	TUBEWELL ASSEMBLY
320	200mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect .
321	150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect.
322	LOWERING OF T/W ASSEMBLY
323	Lowering of 200mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 150m BGL.
324	Lowering of 200mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL.
325	Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL.
326	Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL.
327	PEA-GRAVEL
328	Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site.
329	DEVELOPMENT OF TUBE WELL
330	Development of tube well by 250 PSI air compressor
331	Development of tube well by 250 PSI air compressor
332	Development of tube well by 3 cusec O.P. Unit
333	Development of tube well by 3 cusec O.P. Unit.
334	TEST
335	Chemical and bacteriological test.
336	Pumping plant and Other instrumentation work
337	SITC of 350 LPM, 42 m head 7.5 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates.
338	SITC of Automatic chlorination system SCADA Compatable chlorinating system.
339	Misc item such as protection ring, MCCB, Transformer oil, electric resistance, rubber sheet, 25 sqmm ormad cable and construction of canopyas per site requirement for protection of electronic device and safety purpose and nut bolts, rubber packing for extra/spare column pipe.
340	Supply & Erection of Servo Stabilizer of 15 KVA
341	Soft Stater with RS485Port- 400 V Class,
342	CE/UL Certified Intelligent Smart Energy Meter
343	Motor operated Actuator for with Sluice Valve of size upto 150 m
344	Electro magnetic flow meter upto150mm.
345	CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell
346	CE/UL Certified Pressure Transmiter .
347	Suitable capacity of booster pump with all accessories. Increase terminal Head upto 12 Meter.
348	SCADAAUTOMATION OF (NEW TUBEWELL and OLD Tubewell)
349	SCADAAUTOMATION ITEMS
350	CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement.
351	G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.
352	CE/UL certified 7\" HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters.
353	CE/UL Certified Surge protector for control panel
354	Complete cabling for all equipments at pump house
355	Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment).
356	Installation, commissioing & testing for one tubewell
357	Trial Run for 3 month period for one tubewell
358	Instrumentation Item for(OLD) Existing Tubewell
359	Motor operated Actuator for without Sluice Valve of size upto 150 m
360	Electro magnetic flow meter upto150mm.
361	CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell
362	CE/UL Certified Pressure Transmiter .
363	Soft Stater with RS485Port- 400 V Class,
364	SITC of of 15 KVA Servo Voltage stabilizer or as per requirement (Input Voltage 230V±450V) to Output Voltage 415±1% As per IS 9815-1994.
365	Automation of OHT
366	Motor operatedActuator without Sluce valve 200mm Size
367	Electromagnetic Flowmeter of 200mm Size
368	CE/UL Certified Radar type level transmittor for OHT
369	Three Month Trial & Run for 03 Month
370	ZONE-IV
371	Transportation
372	Rig Machine
373	Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c.
374	Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .
375	O.P.Unit
376	Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .
377	Drilling of Bore
378	Logging of bore hole by departmental/approved electric logger.
379	Drilling of 500mm dia bore from G.L. to 60m BGL.
380	Drilling of 450mm dia bore from 61m BGL to 100m BGL.
381	Drilling of 450mm dia bore from 100m BGL to165m BGL.
382	TUBEWELL ASSEMBLY
383	200mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect .
384	150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect.
385	LOWERING OF T/W ASSEMBLY
386	Lowering of 200mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 150m BGL.
387	Lowering of 200mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL.
388	Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL.
389	Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL.
390	PEA-GRAVEL
391	Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site.
392	DEVELOPMENT OF TUBE WELL
393	Development of tube well by 250 PSI air compressor
394	Development of tube well by 250 PSI air compressor
395	Development of tube well by 3 cusec O.P. Unit
396	Development of tube well by 3 cusec O.P. Unit.
397	TEST
398	Chemical and bacteriological test.
399	Pumping plant and Other instrumentation work
400	SITC of 400 LPM, 46 m head 10 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates.
401	SITC of Automatic chlorination system SCADA Compatable chlorinating system.
402	Misc item such as protection ring, MCCB, Transformer oil, electric resistance, rubber sheet, 25 sqmm ormad cable and construction of canopyas per site requirement for protection of electronic device and safety purpose and nut bolts, rubber packing for extra/spare column pipe.
403	Supply & Erection of Servo Stabilizer of 15 KVA
404	Soft Stater with RS485Port- 400 V Class,
405	CE/UL Certified Intelligent Smart Energy Meter
406	Motor operated Actuator for with Sluice Valve of size upto 150 m
407	Electro magnetic flow meter upto150mm.
408	CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell
409	CE/UL Certified Pressure Transmiter .
410	SCADAAUTOMATION OF (NEW TUBEWELL and OLD Tubewell)
411	SCADAAUTOMATION ITEMS
412	CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement.
413	G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.
414	CE/UL certified 7\" HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters.
415	CE/UL Certified Surge protector for control panel
416	Complete cabling for all equipments at pump house
417	Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment).
418	Installation, commissioing & testing for one tubewell
419	Trial Run for 3 month period for one tubewell
420	Instrumentation Item for(OLD) Existing Tubewell
421	Motor operated Actuator for without Sluice Valve of size upto 150 m
422	Electro magnetic flow meter upto150mm.
423	CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell
424	CE/UL Certified Pressure Transmiter .
425	Soft Stater with RS485Port- 400 V Class,
426	SITC of of 20 KVA Servo Voltage stabilizer or as per requirement (Input Voltage 230V±450V) to Output Voltage 415±1% As per IS 9815-1994.
427	Automation of OHT
428	Motor operatedActuator without Sluce valve 250mm Size
429	Electromagnetic Flowmeter of 250mm Size
430	CE/UL Certified Radar type level transmittor for OHT
431	Three Month Trial & Run for 03 Month
432	ZONE-V
433	Transportation
434	Rig Machine
435	Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c.
436	Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .
437	O.P.Unit
438	Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .
439	Drilling of Bore
440	Logging of bore hole by departmental/approved electric logger.
441	Drilling of 500mm dia bore from G.L. to 60m BGL.
442	Drilling of 450mm dia bore from 61m BGL to 100m BGL.
443	Drilling of 450mm dia bore from 100m BGL to165m BGL.
444	TUBEWELL ASSEMBLY
445	200mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect .
446	150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect.
447	LOWERING OF T/W ASSEMBLY
448	Lowering of 200mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 150m BGL.
449	Lowering of 200mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL.
450	Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL.
451	Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL.
452	PEA-GRAVEL
453	Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site.
454	DEVELOPMENT OF TUBE WELL
455	Development of tube well by 250 PSI air compressor
456	Development of tube well by 250 PSI air compressor
457	Development of tube well by 3 cusec O.P. Unit
458	Development of tube well by 3 cusec O.P. Unit.
459	TEST
460	Chemical and bacteriological test.
461	Pumping plant and Other instrumentation work
462	SITC of 450 LPM, 50 m head 10 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates.
463	SITC of Automatic chlorination system SCADA Compatable chlorinating system.
464	Misc item such as protection ring, MCCB, Transformer oil, electric resistance, rubber sheet, 25 sqmm ormad cable and construction of canopyas per site requirement for protection of electronic device and safety purpose and nut bolts, rubber packing for extra/spare column pipe.
465	Supply & Erection of Servo Stabilizer of 20 KVA
466	Soft Stater with RS485Port- 400 V Class,
467	CE/UL Certified Intelligent Smart Energy Meter
468	Motor operated Actuator for with Sluice Valve of size upto 150 m
469	Electro magnetic flow meter upto150mm.
470	CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell
471	CE/UL Certified Pressure Transmiter .
472	SCADAAUTOMATION OF NEW TUBEWELL
473	SCADAAUTOMATION ITEMS
474	CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement.
475	G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.
476	CE/UL certified 7\" HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters.
477	CE/UL Certified Surge protector for control panel
478	Complete cabling for all equipments at pump house
479	Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment).
480	Installation, commissioing & testing for one tubewell
481	Trial Run for 3 month period for one tubewell
482	Automation of OHT
483	Motor operatedActuator without Sluce valve 200mm Size
484	Electromagnetic Flowmeter of 200mm Size
485	CE/UL Certified Radar type level transmittor for OHT
486	Three Month Trial & Run for 03 Month
487	ZONE-VI
488	Transportation
489	Rig Machine
490	Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c.
491	Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .
492	O.P.Unit
493	Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .
494	Drilling of Bore
495	Logging of bore hole by departmental/approved electric logger.
496	Drilling of 500mm dia bore from G.L. to 60m BGL.
497	Drilling of 450mm dia bore from 61m BGL to 100m BGL.
498	Drilling of 450mm dia bore from 100m BGL to165m BGL.
499	TUBEWELL ASSEMBLY
500	300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect .

Also Visit

Tenders

Uttar Pradesh Tenders

Construction Tenders

Drilling Work Tenders

Tube Well Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Bharat Bhari Nagar Panchayat Water Supply Reorganisation Scheme Siddharthanagar, Construction Of Over Head Tank, Pump House, Staff Quarter, Boundry Wall, Distributation System Of Pipeline, Water Rechaging Unit, Scada Room,New Tube Well Ande&M R, Siddharth Nagar-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Bharat Bhari Nagar Panchayat Water Supply Reorganisation Scheme Siddharthanagar, Construction Of Over Head Tank, Pump House, Staff Quarter, Boundry Wall, Distributation System Of Pipeline, Water Rechaging Unit, Scada Room,New Tube Well Ande&M R, Siddharth Nagar-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us