Tender For Supply Of Material Chittumala Block Panchayath,, Kollam-Kerala

Supply Of Material Chittumala Block Panchayath, 1.01 Stone Aggregate(single size): 40 mm nominal size 1.02 Stone Aggregate(single size):20 mm nominal size 1.03 Coarse sand (zone III) 1.04 Portland Cement 1.05 Stone for masonry work 1.06 Through and bond stone size 24 x 24 x 39cm 1.07 wall form panel 1250x500 mm 1.08 100 mm channel shoulder 2.5 m long 1.09 Double clip (bridge clip) 1.1 Single clip 1.11 M.S. Tube 40 mm dia 1.12 Wall form panel 1250x450xmm 1.13 Corner angle 45x45x5 mm 2.50 long 1.14 Column clamp 450x1070 mm 1.15 Prop 2 m (2-3.5m) 1.16 Stone Aggregate(single size): 10 mm nominal size 1.17 Twisted steel/deformed bars 1.18 Structural steel such as tees, angles, channels and R.S. joists 1.19 Red oxide Zinc chromate primer 1.2 Adjustable telescopic prop 3 m (2.02-3.75m) 1.21 Beam clamp 300-380 mm (450-1070 mm) 1.22 Adjustable span ESO+SI (2.35-3.40) 1.23 Solid blocks of size 30x20x15cm 1.24 Solid blocks of size 40x20x10cm 1.25 Anjili wood scantls 1.26 Flats up to 10 mm in thickness 1.27 Mild Steel round bar above 12 mm dia 1.28 Bright finished or black enameled mild steel butt hinges100x58x1.90 mm 1.29 Bright finished or black enameled mild steel butt hinges50x37x1.50 mm 1.3 Bright finished or black enameled mild steel screws 40 mm 1.31 Bright finished or black enameled mild steel screws 20 mm 1.32 Anjili wood planks 1.33 Float glass sheet of nominal thickness 4 mm (weight not lessthan 10 kg/sqm) 1.34 200 mm Aluminium aldrop 1.35 Iron hooks & eyes 100 mm 1.36 Brass mortice latch and lock 100 x 65 mm with6 levers and apair of brass lever handles 1.37 Oxidised mild steel tower bolt (barrel type) 200x10 mm 1.38 Oxidised mild steel screws 30 mm 1.39 Anodised Aluminium handles 125 mm with plate 175 x 32 mm 1.4 Chromium plated Brass screws 25 mm 1.41 Fine sand (zone IV) 1.42 Vitrified floor tile 60x60 cm 1.43 Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shadesand designs of White, Ivory, grey, Fume Red brown etc. 1.44 Ceramic Glazed Tiles Ist quality minimum thickness 5 mm inall colours shades and designs except burgundy, bottle greenblack 1.45 Vitreous china flat back wash basin 550x400 mm 1.46 15 mm C.P.brass tap 1.47 C.P. brass waste 32 mm 1.48 C.I. bracket for wash basin and sinks 1.49 Black plastic seat (soild) with lid C.P.brass hinges and rubberbuffers 1.5 Vitreous china pedestal type wate closet 1.51 Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (withfittings, accessories and flush pipe) 1.52 Stainless steel kitchen sink - without drain board 470x420 mmbowl depth 178 mm 1.53 Polyethylene water storage tank with cover and suitablelocking arrangemnet 1.54 PVC pipe 63 mm outer dia . 6kgf/cm2 1.55 PVC pipe 50 mm outer dia. 10 kgf/cm2 1.56 35 mm thick factory made solid panel PVC door shutter ofsingle piece extruded profile non decorative finished (Mattfinished) 1.57 Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm 1.58 Factory made door frame size 50x47 mm with wall thickness 5mm made of single piece extruded profile 1.59 PVC Elbow 63 mm dia 1.6 PVC vent cowl 63 mm dia 1.61 PVC Reducer 63x50 mm dia 1.62 PVC door Tee 110x110x75 mm dia 1.63 Semi Rigid PVC waste pipe for sink and wash basin 32 mmdia with length not less than 700 mm i/c PVC waste fittings 1.64 Brass bib-cock-15 mm dia 1.65 PVC pipe 75 mm outer dia 4 kgf/cm2 1.66 PVC pipe 110 mm outer dia. 4kgf/cm2 1.67 Water thinnable cement primer for interior wall surface, havingVOC content less than 50 gms/litre 1.68 Plastic emulsion paint 1.69 Multi surface paint 1.7 Special primer (C.W) 1.71 Metal Primer (U.G.)

INR 5900 /-

INR 37620.0 /-

INR 15.04 Lakhs /-