Tender For Providing Fire Safety Measures Of Newly Constructed Block In Chc, Diglipur Under Cd, Apwd, Diglipur
Tender Value
17.01 Lakhs
Estimated cost
Bid Submission
13 Dec 2024
0 days left
EMD
34023
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Diglipur → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Fire Safety Measures Of Newly Constructed Block In Chc, Diglipur Under Cd, Apwd, Diglipur
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanicalmeans (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Providingandlayinginpositioncementconcreteof specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 4 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 7 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) |
| 8 | Reinforcedcement concreteworkinwalls(any thickness), includingattachedpilasters,buttresses,plinthandstring courses, fllets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: |
| 9 | 1:1.5:3 (1cement :1.5 coarsesand(zone-III)derivedfrom natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 10 | Reinforced cement concrete work in beams, suspended foors, roofshavingslopeupto 15°landings,balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 12 | Foundations, footings, bases of columns, etc. for mass concrete. |
| 13 | Suspended floors, roofs, landings, balconies and access platform |
| 14 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 15 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 17 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 18 | Providing and laying hollow cement concrete block walling 200mm thick consisting hollow block of size 400 x 200x200mm of mix 1:3:6(1cement :3 coarse sand:6 graded stone agg. 10mm nominal down size) having a crushing strength of 3.5N/mm2 at 28 days as per I.S. 2185 (Part-I) 1979 laid in cement mortar 1:6(1cement : 6 coarse sand). |
| 19 | Upto floor five level |
| 20 | Fillingavailableexcavatedearth (excludingrock)intrenches,plinth.sidesof foundationsetc.inlayersnotexceeding 20cmindepth,consolidatingeach deposited layer by ramming and watering, lead up to 50 m and for all lift |
| 21 | 12 mm cement plaster of mix : |
| 22 | 1:4 (1 cement: 4 fine sand) |
| 23 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. |
| 24 | Using M.S. angels 40x40x6 mm for diagonal braces |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 26 | Two or more coats on new work |
| 27 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 28 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 29 | Two coats |
| 30 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 31 | 40 mm thick with 20 mm nominal size stone aggregate |
| 32 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 33 | Size of Tile 600x600 mm |
| 34 | 6 mm cement plaster of mix : |
| 35 | 1:3 (1 cement : 3 fine sand) |
| 36 | Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required.(a)Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520(b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-\"F\" insulation,conforming to IS-325.(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.(d) Suitable cement concrete foundation duly plastered and with anti vibration pads. |
| 37 | 450 lpm at 35 m Head. |
| 38 | Providing, laying, testing & commissioning of \"B\" class heavy duty G.I. pipe conforming to IS1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. andfixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two ormore coats of synthetic enamel paint of required shade complete as required |
| 39 | 40 mm |
| 40 | 65 mm |
| 41 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required. |
| 42 | Stainless Steel (Grade 304) |
| 43 | Supplying and fixing single headed internal hydrant valve with instantaneousGunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conformingto IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required |
| 44 | Single headed Stainless steel |
| 45 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. |
| 46 | 30 m |
| 47 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required |
| 48 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
| 49 | 65mm dia |
| 50 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required. |
| 51 | 65mm dia |
| 52 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 53 | 2x1.5 sq.mm |
| 54 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 55 | 20mm |
| 56 | Supplying and Fixing of PVC Button / Angle Holder including connection etc as required. |
| 57 | Providing and fixing of M.S. Fire Hose Cabinet of 750 mm x 600mm x 250mm made out of 16 gauge M.S Sheet capable of accomodating fire hose reel, landing valve, Hose pipes fittings and accessories. The door shall have front glass with lock and key arrangment and shall be painted with post office red colour make: Life Guard or its equivalent as required. |
| 58 | Supplying of Eveready 12W B22D Emergency Inverter Rechargeable LED Bulb(6500K), 3 Hour Battery Backup Make: Cromton/ Bajaj/ Havells/ Philips. Or equivalent. |
| 59 | Supplying and fixing of 4.5 kg capacity Co2 (carbon dioxide) Fire Extinguishers conforming to ISI 15683 (latest) made from seamless cylinder fitted with controlled valve, high pressure discharge hose and horn complete with initial gas charged with carrying handle and wall mounting bracket complete itsaccessories as required. Make :-Fyrax or its equivalent. |
| 60 | Supplying and fixing of 9 litres capacity Mechanical Foam type Fire Extinguishers with squeeze lever discharge valve conforming to IS 15683 (latest) complete with initial refill consisting of ISI marked Co2 gas cartridge of 60 grams capacity and AFFFwith wall mounting bracketcomplete with its accessories as required.Make :- Fyrax or its equivalent. |
| 61 | Supplying and fixing of ABC Powder type fire extinguisher 02 Kg capacity (ISI Marked conforming to IS:15683) squeeze grip type with discharge hose & nozzle complete with initial charge and wall bracket, etc. as required. Make :- Fyrax or its equivalent. |
| 62 | Supplying and fixingof 6 kg capacity DCP Cartridge type Fire Extinguishers, ISI markedwith squeeze lever discharge valve and conforming to IS 15683 (latest) complete with initial refill consisting of ISI marked Co2gas cartridge of 120 grams capacity(IS 4947 IS)& Sodium base dry chemical powder rating 34B complete with its wall mounting brackets and accessories as required. Make :- Fyrax or its equivalent. |
| 63 | Supplying and fixing of ABC Powder type fire extinguisher 06 Kg capacity (ISI Marked conforming to IS:15683) squeeze grip type with discharge hose & nozzle complete with initial charge and wall bracket, etc. as required. Make: Freeze Fire or its equivalent.Make :- Fyrax or its equivalent. |
| 64 | Supplying and fixing of 9 litres capacity Water Co2 type Fire Extinguishers with squeeze lever discharge valve conforming to IS 15683 (latest) complete with initial refill consisting of ISI marked Co2 gas cartridge of 60 grams capacity with complete with its accessories as required.Make :- Fyrax or its equivalent. |
| 65 | Supplying and fixing of Fire Buckets includingstand with sun shed similar to Life Guard ( (ISI Marked conforming to IS:2456)or its equivalent |
| 66 | 04 Nos. Fire bucket with Stand |
| 67 | Supplying of one number XLPE insulated PVC outer sheathed with galvanised round steel wire or steel srtip armoured aluminium conductor power cable of 1.1 Kv grade of size 16 sq.mm x 3 core conforming to IS 7098 (Part-I) 1988 amended upto date. |
| 68 | Supplying and layingof DWC HDPE pipe of size 40/32, ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 16205 (Part 24): 2018/IS 14930 (Part 2) : 2001, complete with fitting and cutting, jointing etc. on surface/wall including providing clamping arrangement etc asrequired. |
| 69 | Laying of one number PVC insulatedand PVC sheathed / XLPE power cable of 1.1.KV grade of following size in the existing DWC/RCC/ HUME/METAL/GI pipe as required. |
| 70 | Upto 35 sq.mm |
| 71 | Supplying and laying of3- core,10.0 sqmm PVC insulatedSheathed solid Aluminium conductor Industrial cables(Service wire ) Voltage Grade upto 1100V similar to fybros product code FWC 1108. |
| 72 | SITC of indoor type floor mounted cubical panel board made of not less than 0.6 x 1.0 x 0.3 mtrs, non extendable type L.T - 3 phase 440 V, 250 Amps, front hinged shutter with locking arrangement fabricated with 3mm thick CRCA sheet, suitable size M.S angle structure, painted with two coats of metallic paint over zinc chromate metal primer divided in two compartments to accomodate various switchgears, inter connections with pvc insulated 6 sqmm single core copper cable (with copper lugs) in colour code (RYBN) & pvc insulated 01 sqmm single core cable for meter module, copper bus bar with 25mm x 6mm copper strips,danger plate, earth bar, four legs made of 25 x 25 x 6mm size M.S angle to be properly embedded in floor with cement concrete including fixing of starter for motor and the following switchgears.a) MCCB 63 Amps, 4 pole, 10 KA (Outgoing)b)Kit kat rewirable fuse with base, carrier & extension strips 63 Ampsc)Analog Amp, Volt meter d)Selector switche)Indicator lamps (RYB) |
| 73 | Supplying and fixing of Pressure Gauge : Body: SS , Dial Size: 100mm , Range: (0-7) Kg/Cm² 1/2″ BSP Bottom Connection, as complete etc as Required. |
| 74 | Supplying and fixing of Hydraulic pressure switch including 1/2\" Or 3/4\"BSP Bottom complete connection etc as required. |
AI Tender Summary
Tender Timeline
Dec 05, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedDec 13, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 13, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender