Supply & Installation of different electro-mechanical accessories, automatic chlorinator & allied works for Talit Simdal w/s scheme, T.W. No.- I (Replacement tubewell) under CMD, PHE Dte., Dist.- Purba-Bardhaman.-2 Supply and delivery at site submersible pumping machinery directly coupled with wet winding type submersible motor having the following specification pump.Duty Condition : 30 m3 /hr. Head : 80 mtr. Motor : Submersible type 3 Ph. 50 Hz. 400V + 10%, Star Delta, 12.5 H.PImpeller : GM /SS /CromesteelShaft : Stainless SteelMotor winding : Wet Type.Pump outlet - 65/75/100 mm.RPM - 2900(+1%) Suitable for size of tubewell : 250mm x 150mm.Pump set should be energy efficient and equivalent BEE standard energy star rating (3-5) as per IS – 8034:2002Make : KSB / Texmo / PLUGA / BG / PHED approved make(Test certificate, warranty certificate along with characteristic curve should be submitted at the time of delivery.) 3 Supply & delivery of following materials - 4 80mm. dia uPVC column pipe 7.1mm. thick having 70mm. long 8TPI threaded both side with heavy type one socket & O ring biax technology with wiring lock system non corrosive, high tensile having I.S.O. 9001 standard. (Make : Ashirbad/ Oriplast/ Raksha/ Approved Make) 5 i) 10ft. long (3 mtrs) 6 ii) 5ft. long (1.5 mtrs) 7 iii) 80mm. dia. top & bottom adaptor 8 iv) 3 dia. X 5 ft long M.S. (7.1 mm Thick) Column pipe having both side 11 TPI Thread and Socket. 9 4 sq. mm. 3 core copper 1.1 KV grade PVC insulated water proof flat submersible cable.(Make : Finolex/ Gloster/ Mescab/ Currency/ Netco/ Polycab/ Approved Make) 10 Heavy type suitable dia M.S. suspension clamp for above column pipe along with nuts, bolts and washers etc 11 Split type M.S. fabricated tube well cover for 300 mm dia. tube well housing pipe with necessary fitting arrangement along with of column pipe, Air pipe, rope of anti snapping device & cable entry gland etc. 12 Pressure gauge 102 mm. dia and 7 kg. /cm2 range, brass cocks and fitting complete. (Make- H.Guru) 13 Making safety device for above pump by supplying 3 nos. suitable size MS clamp/ MS Cage and 1 dia nylon rope of required length including supplying nuts, bolts, and other materials as per direction. 14 80 mm dia CIDF non rising Sluice Valve (PN-1.0) with flange ends drilled (Make : IVI/ IVC/ Cair/ Hazra/ Upadhya/ Jupitor Engg co.) as per relavant I.S. 15 80 mm dia CIDF single door swing type Non-return Valve (PN-1.0) with flange ends drilled(Make : IVI / IVC /Cair/ Hazra/ Upadhya/ Jupitor Engg co.) 16 Ø3 X 1.0 mtr CIDF Pipe 17 Ø 3 X 1 ft CIDF Pipe 18 Ø 3CIDF Bend 19 Ø 3 Flanged tail piece 20 Ø 3 M. S. Cross 21 Steel Plug, M. S. Nipple, Flange, Nuts, Bolts etc 22 Incresseing the existing tube well Casing height up to a standard level as per direction of EIC. 23 i)For Dia of 300mm. 24 32 mm dia uPVC Pipe (Sch-40) (Make- Ashirvad/ Oriplast/ Supreme/ apprvd make) 25 32 mm dia uPVC Union (Make- Ashirvad/ Oriplast/ Supreme/ apprvd make) 26 32 mm dia uPVC Elbow (Make- Ashirvad/ Oriplast/ Supreme /apprvd make) 27 32 mm dia uPVC Coupler (Make- Ashirvad/ Oriplast/ Supreme /apprvd make) 28 Installation of above pump motor, uPVC column pipes, valves, CIDF, specials etc. for making delivery & washout pipe line and power line connection to the existing panel etc as required to complete the jobsincluding supply of cable gland, sockets as required for the work as per direction of EIC. 29 Making brick pillar (size- 0.25 x 0.25 x 1 Mtr/Suitable hight) for supporting of valves and pipes with plaster & neat cement finish as per direction of EIC. 30 Making of tubewell foundation (size- 3x 3x 3.5 approx) as per site situation including supply of necessary materials as bricks, sand, cement, stone chips etc. with plastering & neat cement finishing to complete as per direction. 31 Supply & delivery of outdoor type Kiosk box (Size: 15x 9x 24) with suitable gauge M.S. sheet along with hinged type front door with locking arrangement including M.S leg angle frame covered consisting 6 way Aluminium busbar 100 amp. fixed on a Porcelain material and grouting its legs in rick piller. 32 Installation of above supply Kiosk bok (item no.-7) and making brick foundation (Size: 24x 10x 30) with supplying bricks, sand, cement etc including plastering and neat cement & making electrical connection complete as per direction EIC 33 Earthing of kiosk Box by spike earhing (20mm X 2 mtr.) with drawing 8 SWG GI wire as per IE rule. 34 Distribution wiring in 1.1KV. Grade, (2X1.5mm2) single core stranded FR PVC insulated & unsheathed copper wire (approved make) in suitable size PVC casing capping (Precision make) with (1.5 Sqmm) single core stranded FR PVC insulted & unsheathed copper wire for ECC, including necessary PVC clips, fittings etc. to light/fan point with piano key type switch (anchor make) fixed on pvc/sheet steel fabricated switch board with Perspex/bakelite top cover on wall including necessary connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] 35 a) average run 4. 5 mtr. - 36 Supply and delivery of following materials- 37 16A DP MCB with enclosure (Make- Havells/ Siemens/ ABB/ L&T) 38 4 long 20 watt LED tube light set white colour (Make -Philips/ Havells) 39 9 watt LED lamp (Make- Philips/ Havells) 40 14 watt LED lamp (Make- Philips/ Havells) 41 Bulkhead light fittings on wall (Make- Bajaj/ Havells/ approvedmake) 42 Supply and fitting fixing of Ceiling fan (Make: Usha /C.G / Havells/ approvedmake) 1200mm. sweep complete with rubber bush, nut, bolt etc. including supply and fixing 2×1/1.4 PVC copper wire for down rod with making necessary connection complete. 43 Supply, delivery and storage at siteof automatically controlled diaphragm type Chlorinator dosing pump with flow rate 100 LPH and maximum pressure of 10Kg/cm2 with all accessories for pump & motor, foundation bolt, suction and discharge flange and with storage tank of dosing solution of 100Ltr. capacity and the prime mover to be coupled with pump of 0.5 H.P., 3 Phase, 1450 RPM, squirrel cage TEFC induciton motor, Motor will be IE2/IE3 ( Make of Machine : Swelore/ Positive/ approved vendor list of PHED ) (Test Certificate will be submitted at the time of delivery) 44 Supply and delivery of following materials- 45 15 mm uPVC Pipe (Sch 40) (Make- approved make) 46 15 mm dia uPVC Male Adaptor plastic threaded (Make- approved make) 47 15 mm dia uPVC Female Adaptor plastic threaded (Make- approved make) 48 15 mm dia uPVC Elbow (Make- approved make) 49 15 mm dia uPVC Coupler (Make- approved make) 50 15 mm dia uPVC Union (Make- approved make) 51 uPVC Blue Medium Solvent Cement (59 ml) 52 Installtion and commissioning of above supplied chlorinator with all accessories, PVC tank, item no-13 and drawing of power line as per IE rules by supplying of necessary wire and continuous earthing. This include the cost of all necessary CC foundation [at least 200mm height] with concrete mixture [sand, cement, stone chips] and neat cement finish by supplyig of all required materials and testing the entire set as per direction of EIC [Power will be feed from PLC/ Manual Panel of pumping machinery] 53 Add GST @ 18% 54 Add Cess @ 1%
