|
| 1 | M & L for dismantling/taking down carefully by disconnecting of electric connection from pole/ wallsof any heights andany situation/loction,placeStreet light fittings type ofTube Rod 36/40 watts,HPSV,HPMV, U/S LED Streedt lights any wattage of flood lights,post top lanterns etc. complete all as specified and directed by Engineer-in-Charge. |
| 2 | Supply & fixing LED Street light 90 Watt WARM WHITE 3000K with silicon gasket for IP 66 (no glue) protection suitable upto 50mm OD holder fixed on existing poles. LED street light shall be made up of pressure die cast alluminium LM 6 aloy housing with toughend glass and high power LEDs and secondary lenses with IP 66 protections ( LED viz; Havells,Wipro, Philips), top opening for separate driver compartment with frame, brand, logo embossed,toughened glass cover.High power ceramic base, CRI > 70,and bolted inside the luminaire panel.Average life class of 50000 hrsmetal body fully coatedphase to phase protection at 440 V upto 4 hours and > 300 V auto cut and restart feature.Luminaries and driver shall be of same make to avoid any dispute and service issue later, Lightsare connecting up with twin core flexible copper conductor cable all as directed and specified The Make of : Havells,Wipro, Philips |
| 3 | All as per Srl itemNo 2.00 above but capacity72 Watt all as directed by Engineer-in-Charge.Make : Havells,Wipro, Philips. |
| 4 | All as per Srl item No 2.00 above but capacity 60 Watt all as directed by Engineer-in-Charge. Make : Havells,Wipro, Philips. |
| 5 | Supply and fixing energy saving LED INVERTER TYPE STREET LIGHT 45 WATT AND BATTERY BACK UP OFMINIMUM 2 HOURS environmental friendly, long life , exclusive innovative die-cast aluminium IP 66 security light with high power LEDs as light source ,Suitable for 40 mm GI pipe, 5700K LED ofHavellsof and ,connecting up with twin core twisted flexible copper conductor cableall as directed. |
| 6 | All as per Srl item No 5.00 above but capacity 60 Watt all as directed by Engineer-in-Charge |
| 7 | Supply and fixing in replacement of Unsv driver forLED street ofcapacity 90 to 120 Watt for anymake and typeall as specified and directed by Engineer-in-charge. |
| 8 | All as per Srl item No 7.00 above but 30 to 72 watt all as specified and directed by Engineer-in-charge. |
| 9 | Supply and fix in repairof Unsv Driver for LED inverter type capacity 45 Watt capacity with Lithium batterybackup min 2 hours all as specified and dirrected. |
| 10 | All as per Srl item No 9.00 above but capacity 60 watt all as specified and directed. |
| 11 | Supply and fixing in replacement GI pipe bracket made out of GI pipe light grade32 mm dia and bend to shape 1.5 mtr long, including MS clamps made out out of MS flat iron of size 40X4mm thick with nuts&bolts,washers complete including dismantling the existing GI pipe bracket and drilling of holes for nuts & bolts etc all as specified and directed by Engineer-in-Charge. |
| 12 | Supply and fixing in repairof single phase 5 KW Automatic street light control switch using Infrared Sensor based NATURE SWITCH for automatic switching of street lights. Natureswitch operation should be based on Natural Light Lux level. Switching offilluminance level should be of minimum 30 Lux and Switching off illuminance should be greater thanor equal to 10 LUX. The sensorshould also have part night operation facility of min 4 hrs to maximum 12 hrs. Thecircuit shall have a provision for manual over ride operation. Thesensor along with suitable power contactors and incoming outgoing MCBs should be enclosed in a pole/wall mountable enclosure made of rust proof, electric shock proof , termite proof andFR grade with Hensel Enclosures, conforming to IP66 complete all as directed byEngr-in-charge.Make of Nature swithc Kaatiya Energy Systems/ Havells/Healer Enterprises. Contactor : BCH/L&T/Schneider, MCBs: Hager/Schneider/L&T/C&S, SMCenclosure and circuit sheet \" Hensel. |
| 13 | M & Lforpainting the PCC pole of 05 Nos bands/ strips of 30cm wide each with two coats of synthetic enamel paint (black and yellow) at a distance of 30cm from the plinth block upto 1500mm height and marking / sign writing of pole number and feeders locations of pole with thick synthetic enamel paint (white)includingall MS fitting street light brackets MS flate angle iron GI pipe etc complete all as specified and directed to match the existing poles. |
| 14 | Supply and fixing LED flood light 200 watt 230V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp in replaceemnt metal halide flood light hoarding light luminaire complete all accessories, connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed by Engr-in-Charge. Make of : Havells,Wipro, Philips |
| 15 | All as per Srl item No 14.00 above but 120 watt all as directed by Engineer-in-Charge. |
| 16 | Supply and fixing in replacement of 3 polepower contactor of amp rating 25 to 45Amps as per existing make and rating all as directed by Engineer in charge. |
| 17 | Supply and fixing of LED post top lantern with die cast housing cum heat sink with PMMA diffuser in IP-66 fitting of 30 Wattall as directed by Engineer in charge.Make: Havells,Wipro, Philips. |
| 18 | Supply and fixing Bollard LED light cap 16 Watt all as specified and directed.Make: Havells,Wipro, Philips. |
| 19 | Supply and fixAlluminium lugs eye type suitable for cable size 6 sq mm to 10 including necessary crimping with crimping tool complete all as specified and directed . |
| 20 | All as per Srl item No 19.00 above but of size 16 sqmm to 35 sq mm. |
| 21 | Supply & fix LT straight through Cable joining kitheat shrinkabale complete with jointing materials suitable for LT Armoured cable 2/4 core of size 16 sqmm to 35 Sqmm all as directed. |
| 22 | Supply & fix LT straight through Cable joining kitheat shrinkabale complete with jointing materials suitable for LT Armoured cable 3.5/4 core of size sqmm 50 to 70 sq mmall as directed. |
| 23 | S & F in replacement of junction box Size 200X140X95mmpoly corbonatewith glass fibre reinforced , environment friendly, recylable, UV resistant , halogen and silicon free anti acid and anti corrosive IP 66/67 in accordancewith IE rule internally embedded gasket, junction box including 3 phase 415 volt aluminium bus bar andDin rail for fixing the MCB including one No. MCB SP 6A 10KA to control the street light including necessary clamps, nuts bolts to fix the junction box with poles all specified and directed. |
| 24 | M & L for preparation of old painted surfaces of electric pole removing complete dust and other deposited materials by cleaning from steel tubular pole of length upto 9 to 12 metres cross arms, bracing, clamps etc and painting with one coat of aluminium paint, retaining and repainting existing marking on pole and replacement of reflective band of 3M brand RED-YELLOW-RED alternate coloured 3 numbers of minimum 5 cm in height wrapped all around the pole all as specified and directed by Engineer in Charge. |
| 25 | S &Fand commessioning of LT outdoortotal enclosed/ Lt panel board size 0.75x0.50x0.30 meterapprox tottalyenclosed made out of 3 mm thick CRCA sheet, dust and vermin proof with front opening 440V, 3 phase, 4 wirehaving 200 Amps capacity aluminiumbus bar insulatedwith sleeves, incoming MCCB TPN 63 Amps 440 Volt 16 KA -01 Noand copper wiring with multistrandedcable including timer switch electronic type 01 No with necessary MCBs 6 Amps 09 Nos, contactor and stater to operate the motor for hosting and lowering the light to carry the repair, lugs and pedastal300 mm grouting and 450 mm above the ground. Grouting the panel.(b) Provisionof wiring from panel to light fitting with 2 Core 4 SQMMcopperconductor cable drawn through M rigid/flexibleconduitwith necessary fitting etc. |
| 26 | Supply and fixing Weather proof flat twin core cablealuminium conductor of size 2.5 sqmm 2 core all as specified and directed by Engineer-in-Charge. |
| 27 | Supply and laying Weather proof flat twin core cable aluminium conductor 1100 volts grade size 10Sqmm including taking out old one all as specified and directed. |
| 28 | Excavation in trenches in soft loose soil including cutting road surfaces n.exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for poles, stay, cable, pipe etc getting out all as specified. |
| 29 | Returning, filling in, including spreading, leveling,watering and well ramming in layers each n.exc 25 cm thick in soft loose soil all as specified. |
| 30 | Removal of excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 31 | Supply and lay brick common burnt sub class \"B\" old size (compressive strength not less than 75 kg per sqcm) for protection of cable laid in trenches for under ground cable all as specified. |
| 32 | M & L for Sand cushioning trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable & 8cm after laying the cable complete all as specified and directed. |
| 33 | Supply and layingin replacement XLPE insulated armoured (under ground) heavy duty electic cablewith stranded aluminim conductor 1100 volts grade of crossectionalarea 16 Sqmm 4core laid in trenches/ducts/through pipes/in floor road/along the pole etc all as specified & directed by Engr-in-charge. Make( Havells,KEI Industries, Rallison) Note : Contractor provide 01 year warrantyof the Cable after completion of the work. Within one year found any fault of the cablecontractor shallbe replaced/rectify the same on own cost. |
| 34 | All as per Srl item No 33.00 abovebut of size 25 sqmm 4 core. |
| 35 | All as per Srl item No 33.00 above but size 35 sq mm 3.5 core. |
| 36 | Supply and fixing in replacement of cable protection GI tubinglight grade fixed long the pole/under road/along the wall of size50 mm bore with necessary clamps all as directed. |
| 37 | Supply and erecting in steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as pecified type 410 SP-55 (11.0 metres long)including dismantling existing pole complete all as specified and directed. |
| 38 | Providing PCC 1:4:8 type D:2 using 40mm graded crushed stone aggreate as in foundation for pole/stay assembly foundationetc all as specified and directed by Engineer-in-Charge. |
| 39 | Providing PCC 1:3:6 type D:2 using 40mm graded crushed stone aggreate as in foundation for pole/stay assembly etcall as specified and directed by Engineer-in-Charge. |
| 40 | Providing PCC 1:2:4 type B:2 using 40mm graded crushed stone aggreate as incoping of pole including necessaryform work and fair finish to exposed surfaces complete all as specified and directed. |
| 41 | Supply and fix Replacement of aluminium strip 25 x 3.15 mm with saddles and fixing screws, insulators rawal plugs etc forconductor for roof and fixed on wall upto test point all as specified. |
| 42 | Supply and fix Replacement of galvanized iron strip 32 x 6mm fixed with saddles & fixing screws, PVC dash fastners, insulators fixed from test point to earth on walls or burried in ground / drawn into hume pipe.NOTE : Excavation & earth work shall be measured and paid for seperately under relevant item of schedule. |
| 43 | M&L for Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. |
| 44 | Supply and Fixing in replacement CI pipe of 200 mm ISI marked with flanged ends socket ends with push on rubber gasket joint etc all as directed |
| 45 | Supply and fixing in replacement CI pipe of 150 mm ISI marked with flanged ends socket ends with push on rubber gasket joint etc all as directed. |
| 46 | Supply and Fixing ductile iron centrifugally cast (span) pressure pipe class K-9 size 100 mm ISI marked with internal cement mortar lining and external zinc and bitumen coated pipe 100mm bore with all spogot and socket ends with push on rubber gasket joint etc all as directed. |
| 47 | All as per item Srl item No 46.00 above but size 150 mm bore. |
| 48 | Material and labour for CI specials such as Tees of any size and radious, collars, tapers, tail pieces, caps and plugs upto 200 mm bore. |
| 49 | A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender.The Schedule of Credit is pre-priced by MES.The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. |
