}

Tender For Construction Of 60000 Ltr Oht At Kanjampatty Thalaivasal H/O Kanjampatty Panchayat.In Pollachi (South) Union In Coimbatore District., pollachi-Tamil Nadu

Rural Development And Panchayats Department has published Tender For Construction Of 60000 Ltr Oht At Kanjampatty Thalaivasal H/O Kanjampatty Panchayat.In Pollachi (South) Union In Coimbatore District.. Submission Date for this Tender is 11-12-2024. Road Work Tenders in pollachi Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

46513507
Tender For Construction Of 60000 Ltr Oht At Kanjampatty Thalaivasal H/O Kanjampatty Panchayat.In Pollachi (South) Union In Coimbatore District.
Tender
Indian
Tamil Nadu
Pollachi
11-12-2024

Tender Details

Tender For Construction Of 60000 Ltr Oht At Kanjampatty Thalaivasal H/O Kanjampatty Panchayat.In Pollachi (South) Union In Coimbatore District. ; 1.Construction of 60000 ltr OHT @ Kanjampatty Thalaivasal H/o Kanjampatty Panchayat. 2 Earth work excavation for foundation in all soils and sub-soils such as hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders, hard gravelly soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessary and depositing the surplus earth in all places shown by the departmental officers with initial leads and lifts, etc., including levellingthe site complete complying with standard specifications and as directed . 3 Cement concrete 1:4:8 (One of cement, four of sand and eight of hard broken stone) using 40mm size hard broken stone inclusive of shoring, strutting, bailing out water, ramming, curing etc., complete in all respects as directed by the departmental officers 4 Supplying and erecting centering for sides and soffits including supports for all reinforced cement concrete works like lintels, beams, etc., including strutting 3M high using Mild steel sheets of size 90cm × 60cm and B.G. 10, stiffened with Mild steel Angles of size 25mm × 25mm × 3mm laid over Silver oak (cw) joists of size 10cm × 6.5cm (Spaced about 91cm c/c) and supported by casurina props of 10cm to 13cm dia (Spaced at 75cm c/c) as noted below including removing the same after specified period without damaging RCC works in all floors etc., complete as directed by the departmental officers complying with relevant standard specifications 5 PLANE SURFACE 6 Below Ground level and upto 3.30m above ground level 7 0m to 3.30m 8 3.31m to 4.30m above ground level 9 6.31m to 7.30m above ground level 10 Curved surface 11 0m to 3.30m above ground level 12 3.31m to 4.30m above ground level 13 6.31m to 7.30m above ground level 14 7.31m to 8.30m above ground level 15 SQUARE COLUMN 16 Below Ground level and upto 3.30m above ground level 17 3.31m to 4.30m above ground level 18 4.31m to 5.30m above ground level 19 5.31m to 6.30m above ground level 20 6.31m to 7.30m above ground level 21 Fabricating and placing the steel grills for reinforcement for all reinforced cement concrete works such as plinth beam, lintels, beams, sunshade, roof and floor slabs etc., including cost of steel and fabricating the reinforcement grills in position etc., completein all floors (The rate to include the cost of binding wire steel also) 22 Reinforced Cement concrete 1:1½:3 (One of cement, one and a half of sand and three of hard broken granite stones ) using 20mm gauge hard broken granite stones for all reinforced cement concrete works excluding the cost and fabricationof reinforcement grills in position, shuttering, centering but including laying, vibrating, curing, finishing and providing Mild steel fan hooks in the RCC slab wherever necessary as directed by the departmental officers etc., complete in all respects 23 For works in 1.5m to 4.5m below Ground Level 24 For works in 0m to 1.50m below Ground level 25 For works in 0m to 4.5m above Ground level 26 For works in 4.51m to 7.32m above Ground level 27 For works in 7.33m to 10.98m above Ground level 28 Painting the walls two coats with first class Cement paintover one coat of priming coat using white cement including cost and conveyance of all materials to site including all labour charges etc., complete 29 Fabrication, supply, delivery and fixing of outside MS ladder wide 45cm made out of 50×50×6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30cm centre to centre welded, jointed etc., providing with suitable side supports, clamps, and locking arrangements provided with one coat of red oxide paint to for providing access to roof top of 60,000 lit.OHT of suitable inclined length, including bottom anchorage and transportation and as directed by departmental officers. 30 Providing and fixing of RCC inner access ladder in RCC 1:1½:3 (one cement, one and half sand and three aggregates) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centring, shuttering charges, mixing concrete curing etc., to required height and clear width of 45cm consisting of two Nos. of vertical post of 10cm×15cm and step slab of 25mm×25mm etc., complete and as directed by the departmental officers. 31 Providing PVC ventilating arrangements mosquito proof nylon net with 110mm PVC cowl and as directed by the departmental officers. 32 Providing manhole cover of size 0.60×0.60m in RCC 1:1½:3 with suitable reinforcement 50mm×50mm×6mm MS angles fixed along edges and as directed by the departmental officers. 33 Provision for pipe connection arrangements for inlet, outlet, scour and overflow etc., including cost of pipes, specials, valve, labour charge for liftin, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc., complete as detailed below. 34 65mm dia GI pipes for inlet connection 35 65mm dia GI pipes for overflow & rain water harvesting pipe 36 50mm dia GI pipes for scour pipe 37 65mm dia GI pipes for delivery pipe 38 65mm dia GI coupler 39 65mm dia GI Elbow 40 65mm dia GM Gate valve 41 GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column BB for all works in this package}

Key Value

Document Fees
Refer document
EMD
INR 12300.0 /-
Tender Value
INR 12.30 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail