|
| 1 | Dismantlingthe aluminium doors and windows shutters from its position with new rubber beading, L angel, Screws and replacement of damaged glass panes with necessary rubber beading, stays, hinges and other materials if necessary including cost of materials, labour charges and dismantling brick or RCC and redoing the same to its orginal condition etc., complete complying with standard specification and as directed by the departmental officers at site of work. |
| 2 | Renewing and refixing the damaged existing partition withAluminium grill of 6mm thick of standard pattern (diamond shape) including \"F\" and \"H\" section using aluminium rectangular section of size 63.50 x 38.10 x 1.28mm @ 0.759 Kg/m for alround and intermediate vertical frame with necessary aluminum clips, rubber beedings etc, including dismantling masonry with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers.The aluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI specification 1868 / 1962 of anodic film thickness of not less 15 microns (fifteen) for all section etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 3 | Renewing and refixing the damaged in position of 1/2 grill and 1/2 panelled made out of aluminium box section of size 63.50 x 38.10 x 1.28mm with vertical and horizontally(Powder coated) and Aluminium grill of 6mm thick of standard pattern (diamond shape) including \"F\" and \"H\" section using aluminium rectangular section of size 63.50 x 38.10 x 1.28mm @ 0.759 Kg/m for alround and intermediate vertical frame with necessary aluminum clips, rubber beedings etc, including dismantling masonry with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers.The aluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI specification 1868 / 1962 of anodic film thickness of not less 15 microns (fifteen) for all section etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 4 | Renewing and refixing the aluminium door 1/2 glazed and 1/2 panelled using anodized Powder coated matt finish aluminium door with frame made out of 47.62 x 44.45 x 1.18mm for vertical, top, horizontal and middle. Bottom, horizontal made out of frame size 101.60 x 44.45 x 1.20mm and the door panel top 1/2 portion is fixed with 5mm thick plain / glass and bottom half portion fixed with 9mm thick novapan board includng necessary accessories like alumnium clips, rubber beedings, door handle, door closer, furniture fittings, screws etc and also inclusive of labour charges for dismantling the exisitng masonryor RCC works and making holes required with power drill, power consumption charges fixing the door frame and shutter frame in position redoing the dismantled portion to the original condition etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 5 | Paving the floor with best quality Double charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 6 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 7 | Supplying and fixing in position best quality approved make white glazed earthernwere sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets.[The sink and specials should be got approved by the Executive Engineer before use on works] |
| 8 | Repainting the old iron work two coats of synthetic enamel paint of approved quality and colour and brand including thorough scrapping preparation of surface and finishing neatly etc complete complying with standard specification and as directed by the departmental officers at site of work.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 9 | Painting two coats of old plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour without primer including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 10 | Total in Figures |
