Health and Family Welfare Government Departments Closing in 0 days TDR #46504178

Tender For Repair And Renovation Work Of Adarsh Primary Health Center, Shingawal (Block Bhinai) District Kekri

Issued by Government Departments · kekri, Rajasthan
Tender Value
2.60 Lakhs
Estimated cost
Bid Submission
12 Dec 2024
0 days left
EMD
5200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
kekri → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Repair And Renovation Work Of Adarsh Primary Health Center, Shingawal (Block Bhinai) District Kekri

BOQ

Name of Work: Repair and Renovation work of Adarsh Primary Health Center, Shingawal (Block Bhinai) District Kekri
Sl. No. Item Description
1Part \"A\" Civil Work
2CEMENT CONCRETE (CAST-IN-SITU):Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
3CEMENT PLASTERPlaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete 20mm thick.
4P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600 mm
5Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).
6Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).
7Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure \"A\": 30 mm thick . Commercial Veneer both side
8Extra for providing external lipping with 2ndclass teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13.
9Extra for cutting rebate in flush door shutters for making double leaf shutter(Total area ofthe shutter to be measured).
10Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails completeas per approved by engineer in charge.0.8mm thick mica
11Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry :Size 100x 75mm
12Grading roof for water proofing treatment withwater proffing compoundCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
13Providing & laying broken glazed titles on roof ( broken glazed tilesnot less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg ofVG-40 (30/40 )grade and 0.30 Kg/Sqm. OfVG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer-in-charge.
14Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
15Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.
16Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.Old work (One or more coats )
17EXTERIOR FINISHING Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ).
18EXTERIOR FINISHING Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ).
19Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : Two or more coats on new work
20Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:For thickness of tiles 10mm to 25mm.
21Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.
22Sanitary work
23P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor
24P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: PVC with PVCbend as per IS : 7231 .
25P & F water closet Seat Covers with brass hinges complete : Solid PVC (ISI marked) grade-I White for EWC.
26P & F Jet spray for water closet with C.P. Copper Tube flange of approved make.
27P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :
28Size 550 mm x 400 mm
29P & F Looking Mirrors with P.V.C. frame of approved make as per direction of Engineer-in-charge Size 500x400mm
30P & F Towel Rail or Ring of approved quality/make:
31C.P. brass towel rail withbrackets 600 x 20mm.
32C.P. Brass Towel Ring revolving type
33P & F Grating of approved quality/make:Stainless Steel Sheet size 125mm dia.
34P & F Soap Dish or Tray of approved quality/makeC.P. brass heavy and superior quality.
35Providing & fixing C.P.flange for 15mm dia taps.
36P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:
37C.P. Brass bib cock,15mm nominal bore.
38(-do-) Long body, 15mm nominal bore weight not less than 690 gm
39P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete :
40Brass wt.Not less than 400 gm, 20mm.
41P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. \"---do--- with 60 cm long thread and nut
42P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :
43(-do-) 20mm nominal bore.
44(-do-) 32mm nominal bore.
45P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 (-do-)
46Hoisting Charges for each floor :1000 (-do-)
47Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)
4820mm nominal outer dia pipes
4932mm nominal outer dia pipes
50Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work).
5120mm nominal outer dia pipes
5232mm nominal outer dia pipes
53P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant.
54110 mm dia
55Providing & Laying C.C. 1:3:6 (Stone Agreegate 20mm nominal size) all around PVC Pipe including 7.5 cm thick bed concerte [Width & Height =Dia of Pipe in CM+15CM] excluding cost of Pipe & Excavation of trenches etc.
56PVC pipe 110 mm dia
57P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:
58Plain Tee110mm dia
59Bend 87 .5110mm dia
60Pipe Clip 110mm dia

AI Tender Summary

OUR REF NO 46504178
AUTHORITY Government Departments
TENDER VALUE 2.60 Lakhs
LAST DATE 12-12-2024
Authority
Authority Name Medical And Health Services
Work Description Tender For Repair And Renovation Work Of Adarsh Primary Health Center, Shingawal (Block Bhinai) District Kekri
Basic Detail
Tender No NIT-26 of 2024-25 (EE MH Ajmer)
Bidding Type Tender
Location
City kekri
State Rajasthan
Key Dates
Publish Date 03 Dec 2024
Submission Date 12 Dec 2024
Open Date 13 Dec 2024
Finance
Tender Value 2.60 Lakhs
Tender Fee 500
EMD 5200
Exemption Not Available
Document List
bef1dcd2-ef0b-43de-860f-192572b2390e.html
BOQ_780535.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf
Tendernotice_4.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Dec 03, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 12, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Dec 13, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

bef1dcd2-ef0b-43de-860f-192572b2390e.html

xls

BOQ_780535.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

pdf

Tendernotice_4.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender