Tender For Proposed Plastic Collection And Processing Unit At Kumathe , Tal -Koregaon, Dist-Satara
Tender Value
27.64 Lakhs
Estimated cost
Bid Submission
17 Dec 2024
0 days left
EMD
27641
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
koregaon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Proposed Plastic Collection And Processing Unit At Kumathe , Tal -Koregaon, Dist-Satara
BOQ
| Sl. No. | Item Description |
| 1 | SUB WORK NO.1MECHANICAL WORKS -A -ITEM NO.1MINI DUST REMOVER- Size 1200 mm ,Drum size 1000mm, output 500 kg/hr |
| 2 | ITEM NO.2SMALL WASHER - MOTER 3 HP ,OUTB PUT -500 Kg/hr |
| 3 | ITEM NO.3MINIBALER - PRESSURE 20 Ton , motor 3Hp, 3phase |
| 4 | ITEM NO.4MINI SHREDDER -Shredding capacity 500 kg/ hr,Electrical Moter 3 Hp |
| 5 | ITEM NO.5Wight machine -200 Kg Platfrom wt max 200 kg |
| 6 | SUB WORK NO.2 CIVIL WORKS -B ITEM NO.1Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift upto 1.5 metre) by Manual Means. |
| 7 | ITEM NO.2Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete.(Lift from 1.5 metre)by Manual Means. |
| 8 | ITEM NO.3Providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with crushed sand/ grit, ramming, watering etc. complete. |
| 9 | ITEM NO.4Providing and laying Cast in situ/ Ready Mix cement concrete in Mix- 10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable Logic ControllerwithSuperwisery Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade). |
| 10 | ITEM NO.5ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water,Steel centering,formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 11 | ITEM NO.6ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water,Steel centering,formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 12 | ITEM NO.7Filling in plinth and floors withapprovedexcavated material in 15 centimetre to 20 centimetre layers including watering and compacting etc. complete. |
| 13 | ITEM NO.8Filling in plinth and floors with contractorsmaterial/ brought from outside and approved by Engineer inchargein layers of 15 centimetre to 20 centimetreincluding watering and compaction etc. complete. |
| 14 | ITEM NO.9Providing and laying Cast in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic ControllerwithSuperwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade). |
| 15 | ITEM NO.10Providing second class Burnt Brick masonry with conventional /I. S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls /in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering complete. |
| 16 | ITEM NO.11Providing second class Burnt Brick masonry in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete. |
| 17 | ITEM NO.12Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. |
| 18 | ITEM NO.13Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neerufinish, to concrete,brick surface,in all positions including scaffolding and curing etc.complete |
| 19 | ITEM NO.14Providing and laying polished Shahabad Stone flooring 25 millimeter to 30 millimeter thickandof reqd.width in plain /diamond pattern on a bed of 1:6 Cement mortar including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning complete. |
| 20 | ITEM NO.15Providing and laying machine cut machine polishedKotah stone slabs 20 to 25 milimetre thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. |
| 21 | ITEM NO.16Providing and fixing in position Thermo Mechanically Treated (TMT) FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 22 | ITEM NO.17Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete. |
| 23 | ITEM NO.18Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc.as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. |
| 24 | ITEM NO.19Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) |
| 25 | ITEM NO.19Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc.\", having rectangular shape of 1.20 metre x 0.90 metre size made out 18 gauge (1.25 mm.) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/ messages/ symbols etc. with approved colour shade paint complete, on Mild Steel angle of size 35 milimetre x 35 milimetre x 3 milimetre frame with properly cross braced Mild Steel angles of size 35 milimetre x 35 milimetre x 3 milimetre duly painted including Two Mild Steel angle iron posts of size 65 milimetre x 65 milimetre x 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 centimetre x 60 centimetre x 75 centimetre including, excavation, refilling, transportation and labour etc. complete. |
| 26 | ITEM NO.20Providing and fixing 50 mm. x 50 mm. Mild Steel square pipe framed steel windows of various sizes as per details with welded square bars 12 mm. at 10 cm. center to center without hot dip zinc coating without/ with ventilator including fabrication, glazing with plain/ obscured glass panes of approved type and quality, all fixtures and fastenings and finishing with one coat of primer complete. |
| 27 | ITEM NO.21Providing and fixing collapsible steel gate in one/ two leaves with hot rolled vertical channels including hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer & oil painting etc. complete. (I.S. 10521-1983). |
| 28 | ITEM NO.22Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 1000 to 20000 liters. |
| 29 | ITEM NO.23Providing & applying washable oil bound distemper to old & new surfaces in two coatsincluding Primer Coat complete. |
| 30 | ITEM NO.24Providing and applying two coats of exterior white weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, prepairing the plaster surface, applying primer coat, scaffolding if necessary and watering the surface for two days complete. |
| 31 | COMPOUND WALL - CITEM NO.1Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 mm dia G.I.pipe (Rezan/concenti Delete dire 0.75mm dia) with hot dip and G.I.coated hooks as per drawing supported on M.S.angle 50x50x6mm at 2.5 mtr.c/c including fixing and fastening with wire,paintingM.S.angleswithonecoatofredlead primer and two coat of oil paint etc. complete. |
| 32 | ITEM NO.2Providing and fixing 50mm.dia.medium class G.I.pipe gate with wicket gate of approved drawing with all fixture sandfittings in two leaves withs tronghold fas embed dedin c.c.block at top and bottom with locking arrangement including cutting,bending, making holes and with one coat of primer etc. complete |
| 33 | .ELECTRICAL WORKS -D ITEM NO.1Point wiring for light/bell concealed type in min 20 mm HMS PVC conduitwith 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW |
| 34 | ITEM NO.2Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping)with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch,earthing and required accessories as per specification no. WG-PW/SW |
| 35 | ITEM NO.3Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweepcomplete erected in position as per specification no. FG-FN/CF. |
| 36 | ITEM NO.4Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slabwith making the site as original. |
| 37 | ITEM NO.5Supplying & erecting 20 SWG G.I sheet metal cawl rectangular /round shapedwith 25 x 25x 3 (mm) angle iron frame, metal mesh to avoid birds entry withnecessary material, suitable for exhaust fan of 450 mm as per specification no FGFAS/ MSC |
| 38 | ITEM NO6Supplying and erecting LED square / circular Max. 25 W down lighter /Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. |
| 39 | ITEM NO.7Supplying & erecting ready to use Retrofit T8 LED, 18 / 20 watt tube lightwith polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary as per specification No. FG-LP/RET. |
| 40 | ITEM NO.8Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB |
| 41 | ITEM NO.9Supplying, erecting & marking FP MCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB |
| 42 | ITEM NO.7Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways(24 poles), with door, 1.2mm thickness, surface/flush mounted, on provided iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1 |
| 43 | ITEM NO.8Supplying, erecting, testing & commisioning bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A having 15mm (width) X 3 mm (thickness), with 99.9 % aluminium purity as per E91E grade & current density 0.8 A per sq mm compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC insulators and accessories of suitable rating and two nos of separate earthing terminals complete as per specification no. CP-BB |
| 44 | ITEM NO.9Supplying & erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulatedwire laid in provided conduit/trunking/inside pole/bus bars or any other placesas per specification no. WG-MA/BW |
| 45 | ITEM NO.10Supplying, installing and testing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.I. Rod complete with all accessories of GI materials & recording the results as per specification no. EA-EP |
| 46 | ITEM NO.11Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 47 | ITEM NO.12Providing & erecting 7m high (clear height) galvanised octagonal pole withfoundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL |
| 48 | ITEM NO.13Supplying & erecting MS pole bracket for LT OH conductor fabricated from 65x65x6 mm section, 1100mm long for necessary nos. of provided insulators and erecting on pole with 50x6mm clamp complete as per specification no. OHPL/ BKT |
| 49 | ITEM NO.14Making M-20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal/conical GI pole). |
| 50 | ITEM NO.15Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG-ODF/SL. |
AI Tender Summary
Tender Timeline
Dec 03, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedDec 17, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 19, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender