Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-12-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 31-12-2024 |
| 2 | 09-12-2024 | Revised BOQ | BOQ | 24-12-2024 |
| Sl. No. | Item Description |
| 1 | Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) n exc. 1.50 Sqm and keep in Safe Custody for removing to store, complete all as specified and as directed. |
| 2 | Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) exc. 1.50 Sqm but not exc. 4.00 Sqm Each,and keep in Safe Custody for removing to store, complete all as specified and as directed. |
| 3 | Taking down of shuttersof any description exc 1.00 Sqm and n.exc 2.00 sqm eachand keep in Safe Custody for removing to store, complete all as specified and as directed. |
| 4 | Taking down of shuttersof any description n.exc 1.00 Sqm and eachand keep in Safe Custody for removing to store, complete all as specified and as directed. |
| 5 | Resecuring or easing and adjusting without taking down shutters of any description area n exc 1.0 Sqm Eachcomplete all as specified and as directed. |
| 6 | Resecuring or easing and adjusting without taking down shutters of any description area exc 1.0 Sqm and n exc 2.0 Sqm Eachcomplete all as specified and as directed. |
| 7 | Taking downand Refixing Shutters of any description exc. 1.00 Sqm and not exc. 2.00 Sqm Each in the Same Opening after easing and adjusting complete all as specified and as directed. |
| 8 | Taking down and Re-fixing Shutters of any description n exc. 1.00 SqmEach in the Same Openingafter easing and adjusting complete all as specified and as directed. |
| 9 | M&L for refixing of steel gate including welding, cutting of hinges and welding/ replacing hinges of steel sections after raising gate height up/ down to make clearance from bottom or in same place area of gate not exc 3 sqm of each side complete all as specified and directed.Note: Steel member shall be measured and paid seperately under relevant item. |
| 10 | Repair windows like steel/wooden/aluminium by using wire brush and easing windows shutter by using oil,greasing or cleaning cement morter or removing old rust, dust,mud etc make it good and smooth to openable in a normal process. for aluminium windows including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,etccomplete all as specified and directed. |
| 11 | S&F Composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in chowkhat completeas per manufacturer instruction complete all as specified and directed. |
| 12 | M&L for providing Plain Cement Concrete (1:2:4) type B0 using 12.5mm graded aggregate as in copings, in lintels, cills,plinth courses, string courses,lacing courses, parapets water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 13 | S&F 2nd class hard wood plain, solid, striaght in chowkats and framed rebated on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixingshutter complete all as specified and directed. |
| 14 | M&L 2nd class HWscantlingclean swan fixed in framed/unframed workincluding fixing MS Cleats & nuts including dismantling old one complete all as specified and directed. |
| 15 | M&L 2nd class HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 6 sqcm & n exe 13 sqcm fixed with nails including dismantling completeall as specified and directed. |
| 16 | M&L 2nd class HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 13 sqcm & n exe 25 sqcm fixed with nails including dismantling complete all as specified and directed. |
| 17 | S & FBands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 straps, etc. have screwed, ends including keys, cotters, wedges, etc. for timber trusses and similar work conforming to Fe- 290 Gde-E-165 complete all as specified and directed. |
| 18 | S & F Wire netting(bird mesh) of galvanised steel wire 0.71 mm dia 12 mm mesh size fixed with tinned tacks of wire staples completeall as specified and directed. |
| 19 | S&F, 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 20 | S&F, 35 mm factory made Flush shutters, with particle board core and both face is covered with decorative face veneer of 4 mm thick, with lipping/frame to match complete all as specified and directed. |
| 21 | S&F 35 mm thick 2nd class hard wood Glazed and skelton shutter(minimum three panel) open rebated and preparedto receive glass, gauze etcedges of theframing plain chamfered or rounded fitted with cut andmitred beads for securing glass etc sizes of members complete all as specified and directed. |
| 22 | Supply & fix radiant door bottom sealing strip guard (door seal) complete all a specified and directed. |
| 23 | S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 24 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC \"C\" Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the \"C\" Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 25 | S&F Solid PVC moulded door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube,complete all as specified and directed. |
| 26 | S&F Factory made PVC solid moulded Door Shutter, 30 mm thick with board core (styles), with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelame PVC sheet on back face, supplying and fixing in frame at site complete all as specified and directed. |
| 27 | S&FStainless steel handles fancy/ decorative type 100 mm size complete all as specified and directed. |
| 28 | S&F Stainless steel, barrel tower bolt decorative type 150mm long complete all as specified and directed. |
| 29 | S&F Brass handles, cast type, polished bright 100 mm size complete all as specified and directed. |
| 30 | S&F Brass barrel tower bolts of length 150 mm , with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 31 | S&F Powder coated aluminium frame (minimum thickness of powder coating 50 micron, Two/three track) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 32 | S&F Powder coated aluminium window and ventilator shutters,(Thickness or powder coating not less than 50 micron). sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,etc.complete all as specified and directed. |
| 33 | S&F Powder coatedaluminium door shutters (Thickness or powder coating notless than 50 micron). aluminium section of wall thickness 1.50 mmincluding necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 34 | S&F 75 mm Butt hinges medium weight cold rolled mild steel complete all as specified and directed. |
| 35 | S&F 100 mm stainless steel Butt hingeswith with SS Screw complete all as specified and directed. |
| 36 | S&F 100mm Butt hinges medium weight cold rolled mild steel complete all as specified and directed. |
| 37 | S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws complete all as specified and directed. |
| 38 | S&F in repairsAluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws complete all as specified and directed. |
| 39 | S&F Extruded aluminium alloy handles fabricated type, anodised, 150 mm long and fixed with screws complete all as specified and directed. |
| 40 | S&F in repairs extruded aluminium alloy handles fabricated type, anodised, 150 mm long and fixed with screws complete all as specified and directed. |
| 41 | S&F in repair MS 300 mm ordinary pattern door spring including roller and roller plate complete all as specified and directed. |
| 42 | S&F Aluminium anodised sliding door bolts of size 250 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of ISI mark complete all as specified and directed. |
| 43 | S&F in repairs Aluminium anodised sliding door bolts of size 250 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 44 | S&F in repairs Casement stays, mild steel, size 300mm, with higned joint and two plates, with studs complete all as specified and directed. |
| 45 | S&F in repairs Aluminium plate typehooks and eyes 125mm long complete all as specified and directed. |
| 46 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 47 | S&F in repairs Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including petty repairs material like screws/nails, plug, MS fillet etc in Steel windows etc. to make it functional complete all as specified and directed.Note: Any items required to be replaced shall be paid under respective items. |
| 48 | Supply only 4.0 mm thick sheetglass ordinary/tinted quality and glazing with oil putty in squaresexc 0.5 sq. m in each panein squares complete all as specified and directed. |
| 49 | Supply only 4 mm thick frosted/ pin headed glass in ventilatorshutterscomplete all as specified and directed. |
| 50 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil puttyin square not exc 0.50 sqm in each pane including hacking out old broken glass any, size, quality or description from wooden / metal frame complete all as specified and directed. |
| 51 | S&F 4 mm thick frosted/ pin headed glass in ventilatorshutters including hacking out old broken glass any, size, quality or description from wooden / metal frame workscomplete all as specified and directed. |
| 52 | S&F 5.0 mm thick sheetglass ordinary/tinted/ Filmed to match existing quality and glazing with oil putty in squaresexc 0.5 sq. m in each panein squares complete all as specified and directed. |
| 53 | Demolition of brickwork or stone/boulder masonry, built in cement mortarcomplete all as specified and directed. |
| 54 | M&L Old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strength notless than 75 kg/Sq cm complete all as specified and directed. |
| 55 | Labour only Brick Work using old bricks obtained from demolition, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed. |
| 56 | M&L Old size sub Class B bricks bricks, straight or curved on plan to any radius in halfbrick thick wall built in cement mortar ( 1:4) having compressive strenght notless than 75 kg/Sq cm complete all as specified and as directed. |
| 57 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level complete all as specified and as directed. |
| 58 | M&L 75mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection & footpath etc and finishing surfaces of concrete even and smooth including filling construction joint at interval of 3.00 mtr and at every corner and shall be filled with bituminous sand filler of ratio 1:3. complete all as specified and directed. |
| 59 | M&L 50mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection & footpath etc and finishing surfaces of concrete even and smooth including filling construction joint at interval of 3.00 mtr and at every corner and shall be filled with bituminous sand filler of ratio 1:3. complete all as specified and directed. |
| 60 | M&L 25 mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) as in sub base/floor etc making finished even and fair using extra cement complete all as specified and as directed. |
| 61 | M&L 40 mm thick,Cement concrete, type B-1, (1:2:4), 20 mm graded aggregate as in floor making finished even and smooth using extra cement complete all as specified and as directed. |
| 62 | M&LPCC (1:4:8) Type D-2 using 40mm graded stone aggregate) as in foundation/mass concrete complete all as specified and as directed. |
| 63 | M&L 100 mm thick,Cement concrete, type D-2, (1:4:8), 40 mm graded aggregate as in sub base even and rough complete all as specified and as directed. |
| 64 | Dismantling of Stone slabs and tiles of any description or thickness in floors Laid, dry and pointed, aprons etc.complete all as specified and as directed. |
| 65 | Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks over compacted sand bedding layer, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 66 | Laying only using old paver paver block inobtained from demolition at site as in footpath of thickness & size/ shape, obtained from dismantaling at site compacted bed of coarse sand including sand and applying water proof paint , filling the joints with fine sandfinishing and sweeping extra sand; complete all as specified and as directed. |
| 67 | Demolition of reinforced cement concrete of any description and in any positioncomplete all as specified and as directed. |
| 68 | M&L RCC (Nominal Mix) 1:2:4 type B-1 (Using 20mm graded stone aggreagate) as in slab, shelves supported on walls beam & coloumns in floor roof including balconies, canopies, deck slabs & shelves complete all as specified and directed.NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items. |
| 69 | M&L TMT Bars 10 mm dia and over, cut to length, bent to shape required including crank-ing, bending and bindingwith and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed. |
| 70 | M&L Formwork toSoffits of suspend slab such as Roof slab, Floor slab, landings and similar works horizontal or sloping etc., not exceding 200mm thick ,flat rough finished surfaces of concrete, complete all as specified and as directed. |
| 71 | Dismantling wrought iron or mild steel work or any description as in door, gates, etc and similar works complete all as specified and as directed. |
| 72 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,orforged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165complete all asspecified and directed. |
| 73 | Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water complete all asspecified and directed. |
| 74 | M&L Rendering 15 mm thick cement plaster on brick wall in CM 1:4 mixed with WPC @ 3% byweight of cement and finished evenand smooth without using extra cement complete all as specified and as directed.Note :WPC will be measured and paid for separately |
| 75 | M&L 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair complete all as specified and as directed. |
| 76 | M&L5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed. |
| 77 | Supply only water proofing compound. Conforming to IS -2645.complete all as specified and as directed. |
| 78 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed. |
| 79 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in lime mortar (one side only measured in cases where both sides are plastered) complete all as specified and as directed. |
| 80 | M&L 15mm thick rendering in CM (1:4) on one side of lathing finished even and fair without using extra cement including 0.71mm chicken wire and size of mesh 12mm complete all as specified and as directed. |
| 81 | M&L 10mm thick rendering in CM (1:6) on other side of lathing finished even and fair complete all as specified and as directed. |
| 82 | Up rooting of tree from walls of bldgs up to extended root and spraying of acid of required quantity complete from any location of Bldg up to 4 storied and making good disturbed surfaces with cement mortar (1:4) or cement concrete type B0(1:2:4) using 12.5mm graded aggregate including necessary scafolding complete for tree of girth up to 5 to 25 cm.complete all as specified and as directed. |
| 83 | M&L for repairing broken edges of chajja\"s, roof projection, Fascias etc . In small widths/depths ( exposed area not exc 0.16 Sqm ) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4 ,Type B-0 , using 12.5 mm Crushed stone aggregates , over GI wire mesh, and applying a coat of anti corrosive paint to exposed Reinforcement and using chemical for bonding old and new concrete/plaster and finishing with CM 1:3 plastering, incl 2 coats of white wash to match the exisitng surfaces incl removing debris , necessary scaffolding , etc complete all as specified and directed. Note : Reinforcement if any provided shall be measured and paid separately |
| 84 | Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and directed.(Note: Any items required to be replaced shall be paid under respective items). |
| 85 | Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work andcarryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc includingmaterials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof complete all as specified and directed.Note: Any items required to be replaced shall be paid under respective items. |
| 86 | M&L Preparing new plastered surfaces of Walls and applying Two Coats of Exterior Emulsion Paint Weather Coat by smart painting method over a coat ofPrimer (as per Manufacturer’s instructions), andapplied over 1mm thick water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 87 | M&LApplying onecoat of Acrylic paint by smart painting methodto oldsurfaces of walls and cornicesincluding preparation of old decorative surface and removal of smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot completeall as specified and directed. |
| 88 | M&L Complete removal of old decorated surfaces and Finishing walls and applying Two Coats of Exterior Emulsion Paint Weather Coat by smart painting method over a coat ofPrimer (as per Manufacturer’s instructions), andapplied over 1mm thick water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 89 | M&L One coat of white wash on old wall surfaces of walls and cornicesincluding preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and directed. |
| 90 | M&L Two coats of white wash on old wall surfaces of walls and cornicesincluding preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and directed. |
| 91 | M&L One coat of white wash on ceiling and cornicesincluding preparation of old plastered or un plastered of surafce of ceiling by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and directed. |
| 92 | M&L Preparing new plastered surfaces of Wallsand applying Two Coats of Exterior Emulsion paint over a coat ofdamp shield Primer (as per Manufacturer’s instructions), andapplied over 1mm thick water proof wall care putty by smart painting method including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 93 | M&L forOldwall surface including properly preparation/removal of existing paint surface andfillings the cracks with exterior wall care putty and pigment and applying one coat of weather coat water proofing paints by smart painting method as in boundry wall, single , double and triple storey bldg, completeall as specified and as directed by Engineer-in-Charge. |
| 94 | M&L Complete removal of existing treatment and applying two coats of weather coat by smartpainting methodover a coat of polymer (exterior grade) putty to make surface smooth and one coat of primer damp sheild over old plastered wall complete all as specefied and directed. |
| 95 | M&L Preparing new Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed. |
| 96 | M&L preparing new Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed. |
| 97 | M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed. |
| 98 | M&L Preperation of new untreated wooden Surfaces plain or moulded, two coats of synthetic enamal paint over a coat of primer n exc 10cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed. |
| 99 | M&L Preparing new Steel or Iron Surfaces of any description,exe 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide, Zinc Chrome Primer, complete all as specified and as directed. |
| 100 | M&L Preparing old Wooden Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. |
| 101 | M&Lapplying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces of any description ,over 10cm width or girth incl and applying one coat ofsynthetic enamel paint (including GI sheets in 3 storey bldgs) complete all as specefied and directed. |
| 102 | M&L writing letters or figures (Block, roman, itallic or indian) n.exc. 30cm high complete all as specefied and directed. |
| 103 | M&L writing stops, commas, short lines, dashes, hyphens, brackets etc.complete all as specefied and directed. |
| 104 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed. |
| 105 | M&L Roughening surfaces of old Concrete Floors, etc. by Picking, Sweeping, Clean and Washing down with Water to remove Dust, etc. and brushing Neat Cement Slurry @ 3.0 Kg per Sqm, complete all as specified and as directed. |
| 106 | M&L Chequered cement concrete tiles of size 300 x 300 x 22 to 25 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 107 | M&L Glazed Ceramic tiles 9 to 10 mm thick (square/ rectangular) any shade, polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with epoxy filler to matchover 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 108 | M&L Glazed Ceramic tiles 9 to 10 mm thick (square/ rectangular) any shade, polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in Skirting/Dado etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 10 mm thick rendering in CM 1:4. complete all as specified and as directed. |
| 109 | M&L Non-skid Ceramic colouredtiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 15mm thick screed bed in cement mortar (1:4)complete all as specified and as directed. |
| 110 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 10 mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 111 | S&F Coloured Glazed ceramic tiles 450 x 300 mm x7 to 8 mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed with epoxy filler to matchover 10mm screeding in Cement mortar 1:3 complete all as specified and as directed. |
| 112 | M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 113 | M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 114 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed. |
| 115 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) for wall linin12 mm thick in cement mortar (1:3) and pointing with white cement(1:2) using marble dust with admixture of pigment to match with shed of graniteover and using 10mm thick cement plater in CM (1:4) complete all as specified and as directed. |
| 116 | M&L for Vitrified parking tiles of any colour/pattern 40cmX40cmX8 to 10 mm thick, set ,jointed and pointed in neat cement slurry in floors with grey cement and pigments in floors and over 15 mm thick screed bed in CM 1:4 for laying floor finishes. complete all as specified and directed. |
| 117 | Supply and Laying Steel Water Tubing 15mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situationor any other Situation,including taking down old unserviceable pipecomplete all as specified and directed. |
| 118 | Supply and Laying Steel Water Tubing 20mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation,including taking down old unserviceable pipecomplete all as specified and directed. |
| 119 | S&F Unplasticised PVC pipes 15 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe or any other Situation,including taking down old unserviceable pipecomplete all as specified and directed. |
| 120 | S & F Unplasticised PVC pipes 20 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe or any other Situation,including taking down old unserviceable pipecomplete all as specified and directed. |
| 121 | Cutting chases ,pinning ,making good to facing where required and painting in cement mortar 1:3 to ends or egdes of landings ,steps,cills ,sunshed,shelves,lintels etc and cutting chases for concealed water tubing etc inlcuding making good cutting shall n.exc 10 cm girth complete all as specified and directed. |
| 122 | S&F in repair15 mm bore pillar tap,fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 123 | S&F in repair, Pillar taps fancy type of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-120gms) complete all as specified and directed. |
| 124 | S & F in repair, 15 mm bore bib taps, cast copper alloy,chromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 125 | S&F in repair, bib tap standard of PTMT any colour screwed, for iron pipe 15mm bore (minimum weight 90 gms) completeall as specified and directed. |
| 126 | S&F in repair stop valve/angle cock, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions including dismantling wall tiles and fixing broken tiles with matching colour, area of wall tiles not exceeding 0.50 sqm. complete all as specified and directed. |
| 127 | S&F in repairs 15mm dia stop valve fancy type chromium platedscrewed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 128 | S&F in repair 15 mmstop valve of PTMT of any colour high pressurescrewed for iron pipe and fixed for 15 mm bore of pipe(minimum weight 90 gms) etc complete all as specified and directed. |
| 129 | S&F Waste coupling CP 32/40 mm dia for glazed ware basin etc with fly nuts flanged including 610 mm long waste pipe etc complete all as specified and directed. |
| 130 | S&Fin repair for 75 mm dia of outlet PVC(SWR)floor trap, plain with granting including jointing with solvent cement complete all as specified and directed. |
| 131 | S&F in repairsstainless steel grating round/ Square cockroach trap with or without hole100/75mm diacomplete all as specified and directed. |
| 132 | S&F in repairs stainless steel curtain rod of 25 mm bore incl brackets and end knobs for door and window complete all as specified and directed. |
| 133 | S&F, as in repair sheet glass self assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated brass/stainless steel bracket guard and railing 60cm long complete all as specified and directed. |
| 134 | S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. |
| 135 | S&F Pedestal for wash hand basin with all necessary fittings. complete all as specified and directed. |
| 136 | S&F bowl urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement with spreadercomplete all as specified and directed. |
| 137 | S&F in repairs 15 mm borePush tap suitable for urinals, any colour high pressure of PTMT screwed for iron pipe and fixed,Minimum weight 15mm-50 gms complete all as specified and as directed. |
| 138 | S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float and Handleincluding Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected Items, complete all as specified and as directed. |
| 139 | S&F as in repair, 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commerical plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 140 | S&F 5 mm thick mirror with decorative frameof face size 40 to 50 mm mounted on 10 to 12 mm water proof plywood and fixed in to chromium plated / stailess steel cup washers of approved pattern complete all as specified and as directed. |
| 141 | S&F PVC bathroom cabinet box with mirror, shutter type of size 500X400 fixed on wallswith wooden plugs and and chromium plated brass screw and cup washer as in repaircomplete all as specified & directed. |
| 142 | S&F Stainless Steel Sink with Drainage Board l.0mm thick Overall size 915mm x 460mm and Bowl size 410 mm x 355mm x 165 mm for Kitchen or Laboratory with Plugs, Washers,Brass chromium plated Waste Fitting 32mm dia,PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed. |
| 143 | S&F Sink made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mmcomplete all as specified and directed. |
| 144 | S&F PVC Conncetions 15mm size with PTMT Nuts of length 450mm and fixed-in-repairs, complete all as specified and as directed. |
| 145 | S&F,as in repair, 32/40 mm dia PTMT 610 mm long waste pipe suitable for WHBcomplete all as specified and directed. |
| 146 | Dismantling and breaking up PVC drain pipes ofany diajointed in CM and taking out of trenches complete all as specified and directed. |
| 147 | S&F PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. |
| 148 | S&F PVC (SWR) Soil, Waste and Ventilating Pipe 75mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. |
| 149 | Fixing only PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. |
| 150 | Fixing only PVC (SWR) Soil, Waste and Ventilating Pipe 75mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. |
| 151 | S&F PVC (SWR) Bend 110mm bore (dia), any type, equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed. |
| 152 | S&F PVC (SWR) Bend 75mm bore (dia), any type, equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed. |
| 153 | S&F PVC (SWR) Junction 75mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed. |
| 154 | S&F PVC (SWR) Junction 110mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed. |
| 155 | S&F PVC (SWR) Junction 110mm bore (dia), Single (Double T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed. |
| 156 | S&F PVC (SWR) Vent Cowl 110mm bore (dia), Jointing to Pipe with Solvent Cement, complete all as specified and as directed. |
| 157 | S&F in repair tubular Towel rail chromium plated 600mm long 20mm dia D type complete all as specified and as directed. |
| 158 | S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 159 | S&F PVC (SWR) Gully Trap 125mm/110mm bore (dia) Outlet, Plain with Grating and Jointing to Waste Pipe with Solvent Cement, as in repair complete all as specified and as directed. |
| 160 | M&L in repair 19/20 mm thick Block boards, grade 1 quality, exterior grade,commercial type, fixed with screws to timber frame-work complete all as specified and directed. |
| 161 | M&L0.90 mm thick decorative choice of laminationtype -1 of surface finish , colour and pattern as approved fixed with adhesive or araldite epoxy resin Hetex or fevicol etcas per manufacturers instructions complete all as specified and directed. |
| 162 | M&L in repair12 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workcomplete all as specified and directed. |
| 163 | S&F Solid PVC coloured board consisting of 18-20 mm thick prelaminated PVC sheet inclusive of solvent cement and fixing at site complete all as spacified and directed. |
| 164 | S & F 100 mm long hasp and staple aluminium anodised wire type ,incl bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 165 | S&F Continuous(Piano) hinges 30 mm width mild steel ,bright finishfixed with screw complete all as specified and directed. |
| 166 | S&F Bal catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc completeall as specified and as directed. |
| 167 | S&F 40 mm dia cupboard knob fixed with nut ,screw and washer of brass polished complete all as specified and directed. |
| 168 | S&F in repairs PTMT Swivel shower diawith shower Arm 15 mm dia 195 mm with bend of 45 degree with flange any colour for fixingmm pipe all (ISI marked) complete all as specified and directed. |
| 169 | Supply and fix, as in repair, Overhead Shower 125 mm dia Round Shape Single Flow (ABS Body) Chromium Plated with Gray Face Plate) with Rubit Cleaning Syste, including fixing to steel pipe or union of 15mm bore complete all as specified and directed. |
| 170 | Taking down existing aluminium shutter of area exc 1.0 Sqm but not exc 2.00 Sqm and refixing the same in the same openingafter repairing and make functional including replacement of fitting and fixture for proper functioning as required completeall as specified and as directed. |
| 171 | S&F in repairs Aluminium (extruded section body type )door closer hydraulically regulated designation No 3, universal type , suitable for door shutter of 851 to 1000 mm in width and of weight and weight betwwen 61 to 80 kgcomplete all as specified and directed. |
| 172 | S&F Mortice lock, Aluminium, 4 Levers, vertical type, size 75 mm and fixed, complete all as specified and as directed. |
| 173 | S&F in repairs floor door stopperaluminium alloy body overall length 140 mm and tonge , anodised with hard drwan steel spring complete all as specified and directed. |
| 174 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy dutycomplete all as specififed and directed. |
| 175 | Demolition of old damaged existing water proofing compound on RCC roof of any description and specification andcleaning the surface thoroughly completeall as specified and directed. |
| 176 | M&L 15mm thick in cement mortar (1:4) on existing roof surface true to level after applying cement slurry @ 3Kg/Sqm including taking down plaster etccompleteall as specified and directed. |
| 177 | Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster febric weight not less than 150gms per Sqm applied over a coat of hot blown bitumen of grade 85/25 @1.2 Kg/Sqm, The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane including removal and refixing of PVC tank any capacity on same place with all required necessary fittings.complete all as specified and as directed.Note:fittings shall be measured and paid under respective items |
| 178 | M&L for cutting grooves in brick wall 75 mm wide & 65mm deep for tucking in edges of felt & shaping horizontal face of groove with cement mortar 1:3completeall as specified and directed. |
| 179 | Cutting out cracks to V section in existing roofs or terracing cleaning outand filling solidly with a hot mixture of bitumen and clean dry sand 1:1(by Weight)completeall as specified and directed. |
| 180 | Demolition of cement concrete unreinforced of any description andin any position, not otherwise specifically provided for complete all as specified and as directed. |
| 181 | M&L for cement concrete1:2:4 type B-0, using 12.5mm graded stone aggregates for , in roof Kerbs,rounded or chamfered or haunching in chajjas, benching, filleting,slightly rounding or chamfering on edges, filling undulations / depressions in roof surface, providing concrete platformfortanks wherever requiredcomplete all as specified and as directed. |
| 182 | S&F in repairs wall mixer 3-in-1 CP 15 mm bore including 125 mm dia overhead shower, complete with 15 mm long bend pipe and wall flange including making good wall surfacecomplte all as specified and directed |
| 183 | S&F in repair 15mm bore two way bib cock cast copper alloy CPFancy type ,withwall flange screwed down for iron pipe or union , complete all as specified and directed. |
| 184 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completeallas specified and directed. |
| 185 | S& F in repair of Towel Ring of stainless steel fixedand including Chromium plated brass screwscomplete all as specified and directed. |
| 186 | S&F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated(CP) brass screws complete all as specified and directed. |
| 187 | S&F Vitreous China White Squatting Pan ‘ORISSA’ Pattern, size 580x440mm with ‘P’ or ‘S’Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan including Flushing Cistern and Flush Pipe, fixing with and including provision of cement Concrete Bedding including Taking out/ down unserviceable WC Pan and connected Items, complete all as specified and as directed. |
| 188 | S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with \"p\" or \"s\" trap front or back inletincluding fixing Bolts with and excluding 10 litre capacity low levelFlushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device and making good disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out unserviceable WC Pan and connected Items, complete all as specified and as directed. |
| 189 | Taking down existing damaged water closet alongwith complete PCC and lime concrete from sunken floor and providing new EWC / IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 150 micron, natural colour with cold cut back adhessive.(iii) Providing lime concrete and cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness. |
| 190 | S&F, as in repairs, plastic water closet seat, closed pattern with flat bottom,and cover for water closet pan (pedestal pattern) complete all as specified and directed. |
| 191 | Supply & Fix as in repairs Kitchen plate rack made of stainless steel sheet 0.60 mm thick of overall size 900mm X 850mm X 250mm with three shelf complete all as specified and directed. |
| 192 | M&L for Closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length complete all as specified and directed. |
| 193 | M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed. |
| 194 | Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters complete all as specified and directed. |
| 195 | S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.20.55 mm size of cross tee and main tee26x24x0.55mmand 32mm x 24mm x 0.55mmwith 2 mm dia double GI wire with end adjuster at one end only suspendor including S & Fing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel truss any type of truss complete all as specified and directed. |
| 196 | S&FPVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 197 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 198 | S&F 6-10 mm thick PVC hollow panels with to 0.5 mm plain PVC sheet suitably placed in Wall including same and matching colour wall angle , u clip, end elip and jointer . As in ceiling and walls including aluminium frame work fixed to wall or wooden scantling vertically and horizontally at an intervalcomplete all as specified and directed. |
| 199 | Taking down plaster, plaster work for patches, tiling work, filling of cement morter in holes, joints, joinery (wooden/steel) iron/aluminium, pelmet box,etc requiring masonarywork and carrying out minor repairs such as patches plaster, tiles, brick, fillingetc. including petty repairs material like cement, sand, aggregate, tiles etc. to make it functional complete all as specified and directed.(Note: Any items required to be replaced shall be paid under respective items of Sch \"A\"/BoQ). |
| 200 | Fixing only in repairs for 4 mm thick E Board decorative type, fixed to timber/ GI/ Aluminium framework in ceiling flat/ sloping complete all as specified and directed. |
| 201 | M&L for Cutting and polishing onlyto existing kota stone surface incl filling joints with pigment and cement etc with beewax polishing complete all as specified and directed. |
| 202 | S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 290 (Gde E-165 ) complete all as specified and directed. |
| 203 | Refixing only steel truss,rafter and purlins of different size bend to shape, cut to length etc, including necessary welding,special shape washer, complete all as specified and directed. |
| 204 | Dismantling AC Corrugated Sheets as in Roofing including Ridge or Similar Pattern Roof Coverings, complete all as specified and as directed. |
| 205 | S&F Pre-painted colour galvalume aluminium zinc coating GI based corrugated steelsheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 206 | S&F Pre-painted colour galvalume aluminium zinc coating GI based plain steelsheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor\"s supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor\"s firm name while carrying out any activities in defence area for better check of security purpose.Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs) |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
