Tender For Supply Installation Testing Commissioning Of High Pressure Pumping Plant At Clear Water Pump House Matela Under Almora Urban Pumping Water Supply Scheme

Sharing tender

supply installation testing commissioning Of High Pressure Pumping Plant At Clear Water Pump House Matela Under Almora Urban Pumping Water Supply Scheme , Rates For Installation, Testing And Commissioning (Sitc) Of Energy Efficient Multistage Centrifugal Pump Sets For Ghat Pumping Water Supply Scheme & Other Pumping Scheme Under Pithoragarh Urban W/S Scheme. , Gurna Pumping Station , Pump- Supply, Installation, Testing, And Commissioning Of Foot Mounted Multistage Centrifugal Water Pump, 535 Meter Head 123 Cum/Hr (2050 Lpm) Discharge, Speed 2900 Rpm, Suction 150 Mm, Delivery 100 Mm, 12 Stages, Closed Impeller, Stud, Flexible Pin Bush Type Coupling, Coupling Bush And Bolt/ Coupling Guard, Base Plate, Ms Foundation Bolt. , Electric Motor:- Supply, Installation, Testing And Commissioning Of Squirrel Cage Induction Energy Efficient Ie3 Rated Motor 400 Hp, Tefc, Having Nominal Speed Of 2900 Rpm Motor Efficienet 96% /Is: 325 Insulation Type: F Rating: 415 V +/- 10%, 3 Phase 50 Hz +/-5% Ac Supply. , Control Panel:- Supply, Installation, Testing And Commissioning Of Automatic Star Delta Starter, Control Panel Of 400 Hp Or Suitable For Above Pump Set. Compatible With Scada System Including All Material, Labour, Cartage Etc. , Valves :- Supply And Fixing Of Double Flanged Valves Including Nutbolts, Washer, Pressure Packing Etc. Complete In All Respect. ( Sitc) As Per The Following (I)150 Mm Size Cast Steel D/F Sluice Valve, Class 150 For Suction Side, (Ii) 100 Mm Size Cast Steel D/F Sluice Valve, Class 600 For Delivery Side, (Iii) 100 Mm Size, Cast Steel D/F Non Return Valve, Class 600 01 No For Delivery Side And 01 No For Rising Main, (Iv) Making Tee, Band, Reducer And Enlarge By Welding For Suction And Delivery Site Both As Per Requirement Of Site And Piping Condition, Including Pipe, Labour, Material, T&P Etc, Complete In All Respect. , Gauges:- Supply And Fixing Of Pressure Gauge 100 Mm Dial Size Of 0-100 Kg/Cm2, Compound Gauge 100 Mm Dial Size Of 0-1 Kg/Cm2, Heavy Duty Control Cock,M.S. Nipple Pipes, Elbows Etc. Required For Fixing The Above Gauges On Pump 01 Set. , Demolishing Of Existing Pump, Foundation Including Disposal Of Debris With In Lead Of 50 M Distance From Pump House Including All Labour, T&P Etc. Complete In All Respect. , Foundation: Pcc In 1:1:5:3 In Cement, Coarse Sand And 20 Mm Gauge Stone Hallast With Iron Core Dust Mixture (Adding 2 Kg Iron Core Dust With Each Cement Bag) And Making Block For Pump Foundation Complete With Grouting The Foundation Bolt As Per Design And Drawing Given By The Pump Manufacturer Including All Labour, Material, Cartage, T & P Etc , Supply And Fixing Of Power Cables:- Copper Conductor Flat Submersible Cable 50 Mm2 3 Core For Suitable Rating Complete In All Respect. , Matela Pumping Station , Pump- Supply, Installation, Testing, And Commissioning Of Foot Mounted Multistage Centrifugal Water Pump, 535 Meter Head 123 Cum/Hr (2050 Lpm) Discharge, Speed 2900 Rpm, Suction 150 Mm, Delivery 100 Mm, 12 Stages, Closed Impeller, Stud, Flexible Pin Bush Type Coupling, Coupling Bush And Bolt/ Coupling Guard, Base Plate, Ms Foundation Bolt. , Electric Motor:- Supply, Installation, Testing And Commissioning Of Squirrel Cage Induction Energy Efficient Ie3 Rated Motor 400 Hp, Tefc, Having Nominal Speed Of 2900 Rpm Motor Efficienet 96% /Is: 325 Insulation Type: F Rating: 415 V +/- 10%, 3 Phase 50 Hz +/-5% Ac Supply. , Control Panel:- Supply, Installation, Testing And Commissioning Of Automatic Star Delta Starter, Control Panel Of 400 Hp Or Suitable For Above Pump Set. Compatible With Scada System Including All Material, Labour, Cartage Etc. , Valves :- Supply And Fixing Of Double Flanged Valves Including Nutbolts, Washer, Pressure Packing Etc. Complete In All Respect. ( Sitc) As Per The Following (I)150 Mm Size Cast Steel D/F Sluice Valve, Class 150 For Suction Side, (Ii) 100 Mm Size Cast Steel D/F Sluice Valve, Class 600 For Delivery Side, (Iii) 100 Mm Size, Cast Steel D/F Non Return Valve, Class 600 01 No For Delivery Side And 01 No For Rising Main, (Iv) Making Tee, Band, Reducer And Enlarge By Welding For Suction And Delivery Site Both As Per Requirement Of Site And Piping Condition, Including Pipe, Labour, Material, T&P Etc, Complete In All Respect. , Gauges:- Supply And Fixing Of Pressure Gauge 100 Mm Dial Size Of 0-100 Kg/Cm2, Compound Gauge 100 Mm Dial Size Of 0-1 Kg/Cm2, Heavy Duty Control Cock,M.S. Nipple Pipes, Elbows Etc. Required For Fixing The Above Gauges On Pump 01 Set. , Demolishing Of Existing Pump, Foundation Including Disposal Of Debris With In Lead Of 50 M Distance From Pump House Including All Labour, T&P Etc. Complete In All Respect. , Foundation: Pcc In 1:1:5:3 In Cement, Coarse Sand And 20 Mm Gauge Stone Hallast With Iron Core Dust Mixture (Adding 2 Kg Iron Core Dust With Each Cement Bag) And Making Block For Pump Foundation Complete With Grouting The Foundation Bolt As Per Design And Drawing Given By The Pump Manufacturer Including All Labour, Material, Cartage, T & P Etc. , Supply And Fixing Of Power Cables:- Copper Conductor Flat Submersible Cable 50 Mm2 3 Core For Suitable Rating Complete In All Respect. , Hanuman Mandir Pumping Station , Pump:- Supply, Installation, Testing & Commissioning Of Foot Mounted Multistage Centrifugal Water Pump, 200 Meter Head, 102 Cum/Hr (1700 Lpm) Discharge, Speed 2900 Rpm, Suction 150 Mm, Delivery 125 Mm, 08 Stages, Closed Impeller, Stud, Flexible Pin Bush Type Coupling, Coupling Bush And Bolt/Coupling Guard, Base Plate, Ms Foundation Bolt). , Electric Motor :- Supply, Installation, Testing & Commissioning Of Squirrel Cage Induction Energy Efficient Ie3 Rated Motor 125 Hp., Tefc, Having Nominal Speed Of 2900 Rpm, Make:- Abb Motor Efficienct:-95%/Is:325, Insulation Type: F, Rating: 415 V+/-10%, 3 Phase, 50Hz+/-5%, A.C. Supply. , Variable Frequency Drive:- Supply, Installation, Testing & Commissioning Of Variable Frequency Drive To Control The Above Motor. , Gauges:- Supply And Fixing Of Pressure Gauge 100 Mm Dial Size Of 0-100 Kg/Cm2, Compound Gauge 100 Mm Dial Size Of 0-1 Kg/Cm2, Heavy Duty Control Cock, M.S. Nipple, Pipes Elbows Etc. Required For Fixing The Above Gauges On Pump-01 Set. , Demolishing Of Existing Pump Foundation Including Disposal Of Debris Within Lead Of 50 Meter Distance From Pump House Including All Labour, T&P Etc. Complete In All Respect. , Foundation:- Rcc In 1:1.5:3 In Cement, Coarse Sand And 20 Mm Gauge Stone Ballast With Iron Core Dust Mixture (Adding 2 Kg Iron Core Dust With Each Cement Bag) And Making Block For Pump Foundation Complete With Grouting The Foundation Bolt As Per Design And Drawing Given By The Pump Manufacturer Including All Labour, Material, Cartage, T&P Etc. Complete In All Respect Or As Per Direction Of Engineer In Charge. , Supply And Fixing Of Power Cables:- Copper Conductor Flat Submersible Cable 50 Mm2 3 Core For Suitable Rating Complete In All Respect. , Ghat Raw Water Pumping Station , Pump:-Supply, Installation, Testing & Commissioning Of Vertical Turbine Water Pump,30 Meter Head. 129 Cum/Hr (2150 Lpm) Discharge, Speed 1500 Rpm, Suction 150 Mm, Delivery 150 Mm Complete. , Electric Motor:- Supply, Installation, Testing & Commissioning Of Vertical Solid Shaft Energy Efficient Ie3 Rated Motor 30 Hp., Tefc, Having Nominal Speed Of 1500 Rpm, Motor Efficienct:- 94%/Is:325, Insulation Type: F, Rating: 415 V+/-10%, 3 Phase, 50Hz+/-5%, A.C. Supply. , Gauges:- Supply And Fixing Of Pressure Gauge 100 Mm Dial Size Of 0-100 Kg/Cm2, Compound Gauge 100 Mm Dial Size Of 0-1 Kg/Cm2, Heavy Duty Control Cock-01 No., M.S. Nipple, Pipes Elbows Etc. Required For Fixing The Above Gauges On Pump. , Supply And Fixing Of Power Cables:- Copper Conductor Flat Submersible Cable 16 Mm2 3 Core For Suitable Rating Complete In All Respect. , Dismantling Of Existing Pumping Plants And Accessories:- Dismantling And Removing Of Existing Pump Set And Valves Etc. And Handing Over The Same To The Department As Per The Direction Of Engineer Incharge. , Rai Water Pumping Station , Electric Motor: Supply, Installation, Testing & Commissioning Of Squirrel Cage Induction Energy Efficient Ie3 Rated Motor 30 Hp., Tefc, Having Nominal Speed Of 2945 Rpm. Motor Efficienct: 93%/Is:325, Insulation Type: F, Rating: 415 V+/-10%, 3 Phase, 50Hz+/-5%, A.C. Supply. , Variable Frequency Drive:- Supply, Installation, Testing & Commissioning Of Variable Frequency Drive To Control The Above Motor. , Gauges:- Supply And Fixing Ofpressure Gauge 100 Mm Dial Size Of 0-10 Kg/Cm², Compound Gauge 100 Mm Dial Size Of 0-1 Kg/Cm², Heavy Duty Control Cock - 02 No, M.S. Nipple, Pipes Elbows Etc. Required For Fixing The Above Gauges On Pump. , Supply And Fixing Of Power Cables:- Copper Conductor Flat Submersible Cable 25 Mm2 3 Core For Suitable Rating Complete In All Respect. , Kasni Water Pumping Station , Pump- Supply, Installation, Testing & Commissioning Of Foot Mountedmultistage Centrifugal Water Pump, 210 Meter Head, 144 Cum/ Hr (2400Lpm) Discharge, Speed 2940 Rpm, Suction 150 Mm, Delivery 125 Mm, 03Stages, Closed Impeller, Stud, Flexible Pin Bush Type Coupling, Couplingbush And Bolt/Coupling Guard, Base Plate, Ms Foundation Bolt). , Electric Motor :- Supply, Installation, Testing & Commissioning Of Squirrel Cage Induction Energy Efficient Ie3 Rated Motor 180 Hp., Tefc, Having Nominal Speed Of 2940 Rpm, Motor Efficiency :- 95%/Is:325,Insulation Type: F, Rating: 415 V+/-10%, 3 Phase,50Hz+/-5%, A.C. Supply. , Variable Frequency Drive:- Supply,Installation, Testing & Commissioning Of Variable Frequency Drive To Control The Above Motor. , Valves: Supply And Fixing Of Double Flanged Valves. Including Nutbolts, Washer, Pressure Packing Etc Complete In All Respect (Sitc) Asper The Following:- (I)150 Mm Size, Cast Steel D/F Sluice Valve, Class 300 For Suction Side. 02 No.(Ii)125 Mm Size, Cast Steel D/F Sluice Valve, Class 300 For Delivery Side. 02 No. (Iii)150 Mm Size, Cast Steel D/F Non-Return Valve, Class 600 One No. For Delivery Side And 01 No. For Rising Main.02 No. (Iv) Making Tee, Bend, Reducer And Enlarger By Welding For Suction And Delivery Side Both As Per Requirement Of Site And Piping Condition Including Pipe, Labour, Material, T&P Etc. Complete In All Respect. , Supply And Fixing Of Pressure Gauge 100 Mm Dial Size Of 0-10 Kg/Cm2, Compound Gauge 100Mm Dial Size Of 0-1 Kg/Cm2, Heavy Duty Control Cock, M.S. Nipple, Pipes Elbows Etc. Required For Fixing The Above Gauges On Pump. , Demolishing Of Existing Pump Foundation Including Disposal Of Debris Within Lead Of 50 Meter Distance From Pump House Including All Labour, T&P Etc. Complete In All Respect. , Foundation:- Rcc In 1:1.5:3 In Cement, Coarse Sand And 20 Mm Gauge Stone Ballast With Iron Core Dust Mixture (Adding 2 Kg Iron Core Dust With Each Cement Bag) And Making Block For Pump Foundation Complete With Grouting The Foundation Bolt As Per Design And Drawing Given By The Pump Manufacturer Including All Labour, Material, Cartage, T&P Etc. Complete In All Respect Or As Per Direction Of Engineer In Charge. , Supply And Fixing Of Power Cables:- Copper Conductor Flat Submersible Cable 25 Mm2 3 Core For Suitable Rating Complete In All Respect , Thulligarh Water Pumping Station , Pump- Supply, Installation, Testing, And Commissioning Of Vertical Turbine Water Pump, 69 Meter Head, 159 Cum/Hr(2650 Lpm) Discharge, Speed 1500 Rpm, Suction 150 Mm Delicery 150 Mm Complete. , Electric Motor:- Supply, Installation, Testing And Commissioning Of Vertical Solid Shaft Energy Efficient Ie3 Rated Motor 60 Hp, Tefc, Having Nominal Speed Of 1500 Rpm Motor Efficienet 94 %/Is: 325 Insulation Type: F Rating: 415 V +/-10%, 3 Phase 50 Hz +/-5% Ac Supply. , Variable Frequency Drive: Supply, Installation, Testing And Commissioning Of Variable Frequency Drive To Controlnthe Above Motor. , Valves :- Supply And Fixing Of Double Flanged Valves Including Nut Bolts, Washer, Pressure Packing Etc. Complete In All Respect. ( Sitc) As Per The Following (I) 150 Mm Size Cast Steel D/F Sluice Valve, Class 150 For Suction Side (Ii) 150 Mm Size Cast Steel D/F Sluice Valve, Class 300 For Delivery Side (Iii) 150 Mm Size, Cast Steel D/F Non Return Valve, Class 300 01 No For Delivery Side And 01 No For Rising Main. (Iv) Making Tee, Band, Reducer And Enlarge By Welding For Suction And Delivery Site Both As Per Requirement Of Site And Piping Condition, Including Pipe, Labour, Material, T&P Etc, Complete In All Respect. , Gauges: Supply And Fixing Of Pressure Gauge 100 Mm Dial Size Of 0-100 Kg/Cm², Compound Gauge 100 Mm Dial Size Of 0-1 Kg/Cm2, Heavy Duty Control Cock, M.S. Nipple Pipes, Elbows Etc. Required For Fixing The Above Gauges On Pump. , Supply And Fixing Of Power Cables:- Copper Conductor Flat Submersible Cable 16 Mm2 3 Core For Suitable Rating Complete In All Respect. , Dismantling Of Existing Pumping Plants And Accessories:- Dismantling And Removing Of Existing Pump Set And Valves Etc. And Handing Over The Same To The Department As Per The Direction Of Engineer Incharge.