Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Part A- Vksy Iyktk dk fuekZ.k dk;Z Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned including removal and disposal of top organic soil. |
| 2 | Earth work in embankment mechanically compacted to 95% proctor density in ordinary soil, excavation to be done in regular pits not exceeding 0.5m depth and work embannkment to be in 20 cm layers including ramming and dressing pulverisation the surf including supply of labour, royalty of materials, T&P, Roller and Water sprinkler with a lead upto 1km and earth shall be available ADA land. (Analysis) |
| 3 | Construction of subgrade and earthen shoulders- Earth work in embankment mechanically compacted to 100% proctor density in ordinary soil, excavation to be done in regular pits not exceeding 0.5m depth and work embannkment to be in 20 cm layers including ramming and dressing pulverisation the surf including supply of labour, royalty of materials, T&P, Roller and Water sprinkler with a lead upto 15km and earth shall be arranged by contractor. (Analysis) |
| 4 | Construction of granular sub-base by providing, laying, spreading and compacting of crushed aggregate material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density including protection of egdes of GSB layer, cost of all materials, labour, hire charges of machinery, lighting barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., complete as per clause 401. (Sanctioned rate) |
| 5 | Providing and laying cement concrete in 4:2:1 of not less than strength of M-150 stone ballast (40 mm nominal size), approved coarse sand and cement, curing complete including of cost of form work in foundation and floors-completion of the work as per direction of the E / I. (CH-5, S.I. No. 6 SOR-2023-24) |
| 6 | Cast in situ cement concrete M20 Kerb and Channel 110mm top 450 mm in bottom 350mm height in M20 grade PCC on M15 grade foundation 150mm thick, foundation having 50mm projection beyond kerb stine, kerb stone laid with kerb laying machine, foundation concrete laid mannually all complete as per clause 409. |
| 7 | Construction of subgrade and earthen shoulders- Earth work in embankment mechanically compacted to 100% proctor density in ordinary soil, excavation to be done in regular pits not exceeding 0.5m depth and work embannkment to be in 20 cm layers including ramming and dressing pulverisation the surf including supply of labour, royalty of materials, T&P, Roller and Water sprinkler with a lead upto 15km and earth shall be arranged by contractor. |
| 8 | Construction of granular sub-base by providing, laying, spreading and compacting of crushed aggregate material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density including protection of egdes of GSB layer, cost of all materials, labour, hire charges of machinery, lighting barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., complete as per clause 401. |
| 9 | Construction of wet mix macadam (WMM) by providing, laying, spreading and compacting graded stone aggregate as per table 400-13, mixing in a wet mix plantat OMC, carriage of mixed materials to work site in tipper to paver, laid over a previously prepared surface using Paver finisher hydrostatic with sencor control to the required grade, level and alignment, compacting with vibratory roller to achieve the desired density including protection of edges of WMM layer, cost of all materials, labour, hire charges of machinery, lighting barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., complete as per clause 406. |
| 10 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. |
| 11 | Providing and applying tack coat as per table 500-5 on prepared surface using bitumen emulsionincluding clearing of road surface by meachincal broom & dusting by air compressor and spraying by emulsion pressure distributor, including cost of all materials, labour, hire charges of machinery, loading, unloading with all lead and lift etc. as per clause 503.i) On granular surface - 2.5 Kgs/10 Sqm |
| 12 | ii) On bituminous surface - 2.0 Kgs/10 Sqm |
| 13 | Providing and laying dense bituminous macadam using crust aggregates as per table 500-9 of specified graded aggregates and filler material @2% by weight of aggregates, premixed with bituminous binder content quantity as per design mix, in 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour, transporting the hot mix in a tipper to paver at work site, laid over previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollersas per clause 501.6 and 501.7 to achieve the desired compaction including cost of all materials, labour, hire charges of machinery, lead, lifts, loading, unloading, stacking, transporting etc.as per clause 505. |
| 14 | Providing and laying bituminous concrete using crust aggregates as per table 500-17 of specified graded aggregates and filler material @2% by weight of aggregates, premixed with bituminous binder content quantity as per design mix, in 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour, transporting the hot mix in a tipper to paver at work site, laid over previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers as per clause 501.6 and 501.7 to achieve the desired compaction including cost of all materials, labour, hire charges of machinery, lead, lifts, loading, unloading, stacking, transporting etc.as per clause 507. |
| 15 | Road Marking with Hot Applied Thermoplastic Compound with Refleftorislng Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holse. SOR-23-24, Chap-28, Item No-2 |
| 16 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes. SUB HEAD : 10.0 STEEL WORK, Code No-10.16,DSR-2021 |
| 17 | 10.19 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. SUB HEAD : 10.0 STEEL WORK, Code No-10.19, DSR-2021 (Vol-1) |
| 18 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. SUB HEAD : 10.0 STEEL WORK, Code No-10.1,DSR-2021 |
| 19 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m².Chap-11, Item No-3, SOR-2023-24 |
| 20 | Providing and laying cement concrete in 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. in Foundation and floors. (Chap-5, Item No-3, PWD SOR-23-24) |
| 21 | 12 m-16 m Span Overhead full gantry Signs (Providing and erecting overhead signs with a corrosion resistant aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans). (SOR-MORTH-802+201) |
| 22 | 6M Span over head Cantilever Structure with 300 dia M S one Vertical post Supply, fixing & erection of built up Cantilever Structure 6 m span comprising of one vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M Splate at bottom. The horizontle Truss shall comprise of 50 mm dia heavy class M S pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coals of synthetic enamel plant. The work includes construction of RCC Foundation of size 0.90x0.90x1.50 m of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean concrete in 1:3:6 cement coarse sand and 40 mm gauge stone ballast and RCC - M25 grade concrete including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforecement & shuttering. The lateral vertical clearances and complete. Installation work shall be as per relevantclauses of MORTH & H specification section 800 and IRC 67 2012 complete in all respect The Rates shall include cost of design febrication, supply, transporation, Local shifting Erection of Signage structure using cran, inclusive of all taxes etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge. (Chap-28, Item No-4, PWD SOR-23-24) |
| 23 | Retro Reflective Sheeting type-XI with 4 mm thick ACM Single side Providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 0.4 to 0.5 mm both side aluminium skin aliuminium composite panel face to be fully covered with Hign Intensity prismatic sheeting type IV as per IRC-67:2012 retro reflective sheeting with back frame MS angle of 35x35x5mm. Legends letters, numerals and borders etc should be as per MortH specification No-801.3.7. The sheeting shall have a pressure-sensitive adhesive of the aggresive-lack type requiring no heat, solvent other preparation for adhesion to a smooth clean surface in a manner recommended by the sheeting manufacturer. The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS Angle with riveting. Micro prismatic type IV Retro reflective sheeting confirming to ASTM D4956-09 shall be Pressure fixed. The retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal adhesion, impact resistance, specular glass and fungus resistance. 3 years outdoor weathering and its having passed these shall be obtained from International/Government Laboratory/Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively a certificate conforming to ASTM Specification (D 49858-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after reciept of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67.2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, transpiortation, Installation and incidentals all complete as per direction of the engineer-In-Charge. (Chap-28, Item No-12, PWD SOR 23-24) |
| 24 | Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-40 grade concrete with HYSD reinforcement conforming to IRC:21, at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design and as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified. (Reinforcement concrete 0.3 cum/Rmt and steel 28 Kg/Rmt) |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work including cost of all materials, labour, T&P etc. required for proper completion work. (Chap-15, Item No-3, PWD SOR 23-24) |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shadeTwo or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture: (Chap-15, Item No-4, PWD SOR 23-24) |
| 27 | Providing and fixing metal beam crash barrier complete as per drawing and technical specification clause 811. |
| 28 | Supply and fixing RCC of N.P.-3 & NP-4 Hume pipe in proper postion as directed by E/l including cartage of pipe/collars up to 30m distance (labour only) excluding cost of900mm dia (Chapter-1, Item-32) (Chapter-20, Item-10) SOR 2023-24 |
| 29 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 30 | Reinforcementcement concrete work in beams, suspended floors, roofs having balconies, shelves, chajja, bands, staircases and spiral stair cases above plinth level upto fifth floor lavel. including cost of centering, shuttering, finishing and excluding reinforcement 1:1.5:3 ( 1 Cement : 1.5 coarse sand (Zone- III) : 3 Graded stone. Chap-5, Item No.13, SOR-23-24 |
| 31 | Providing and Fixing ACP Sheet in Facade work on Toll Plaza …………….All Complete. (Rate as per lowest market quotation) |
| 32 | Part B- iz\"kklfud Hkou dk fuekZ.k dk;Z Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including fitting watering and ramming of excavated earth into the trenches of into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. (Small work), Chap-4, Item No.1, PWD SOR-23-24 |
| 33 | Providing and laying cement concrete in 1:4:8 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of from work. In Foundation and floors. Chap-5, Item No.3, PWD SOR-23-24 |
| 34 | Class-150 (Non Modular) brick work in 1:4 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. Chap-6, Item No.2, PWD SOR-23-24 |
| 35 | Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size)Chap-7, Item No.1, SOR-23-24 |
| 36 | Class-150 (Non Modular) brick work in 1:4 cement and Coarse sand mortar in super structure above plinth level supply of all materials, labour and T&P etc. required for proper completion of the work. Chap-6, Item No.5/6.8 A, SOR-23-24 |
| 37 | RCC work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement- All work up to plinth level: 1:1.5:3 ( 1 cement : 1.5 Coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 38 | Reinforced cement concrete work in walls (any thikness), Including attachedpillasters, buttresses, pilinth and string courses, filets, coumns, pillars, piers, abutments, posts and struts etc. including cost of centering, shuttering, finishing and excluding reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Chap-5, Item No.12/5.2, SOR-23-24 i) upto plinth level |
| 39 | ii) Above plinth level upto fifth floor lable |
| 40 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 41 | Reinforcementcement concrete work in beams, suspended floors, roofs having balconies, shelves, chajja, bands, staircases and spiral stair cases above plinth level upto fifth floor lavel. including cost of centering, shuttering, finishing and excluding reinforcement 1:1.5:3 ( 1 Cement : 1.5 coarse sand (Zone- III) : 3 Graded stone. Chap-5, Item No.13, SOR-23-24 |
| 42 | 6mm Celling plaster 1:3 (1 cement : 3 fine sand) cement & fine sand in F.M. not less than1.25, 1:3 including chiping of RCC surface before celling plaster. The cost of including all material, labour T&P and scafolding etc. Chap-13, Item No-13, PWD, SOR-2023-24 |
| 43 | Earth work is embankment in inordinary soil excavation to be done in regular pits not exceeding 0.50m in depth and work embankment to bedressing the surface to required leveles and slopes and also including suppy of material T&P lead upto 10 Km and earth shall be arrange by contractor, Chap-4, Item No.3, SOR-23-24 (Analysis Rates) |
| 44 | 12mm Cement plaster with cement morter in proportionof 1:4 cement & coarse sand of single coat for interior plastring upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In grith and finished even and smooth. Chap-13, Item No.2, PWD, SOR-2023-24 |
| 45 | 15mm Cement plaster with cement morter in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level includinginternal rounded angles charmfers, and rounded angles not exceeding 80mm. In grith and finished even and smooth. |
| 46 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacture, over the plastered well surface to prepare the surface even and smooth complete supply of all labour material and T&P required for proper completion of work. Chap-15, Item No-6, PWD, SOR-2023-24 |
| 47 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer including cost of all materials labour T&P etc. required for proper completion. Chap-15, Item No-7, PWD, SOR-2023-24 |
| 48 | Finishing walls with AcrylicSmooth exterior paint ofregulered shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) supply of all labour material and T&P required for proper completion of work (Chap-15 Item No.17, SOR-2023-24). |
| 49 | Painting withsynthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work including cost of all materials, labour T&P etc. required forproper completion of work. Wood and steel. (Chap-15 Item No.03, SOR-2023-24). |
| 50 | Providing and laying cement concrete in 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and curing complete, Including cost of from work. In Foundation and floors. Chap-5, Item No.6 SOR-23-24 |
| 51 | 20 mm Cement Plaster 1:3 (1 Cement : 3 coarse sand ) finished with a floating coat of neat cement. |
| 52 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 53 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.: 80x1.25 mm M.S. laths with 1.25 mm thick top cover. Chap-10 Item No-4, SOR-2023-24 |
| 54 | Providing and fixing ball bearing for rolling shutters. |
| 55 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. SOR-I NO-11.37A) |
| 56 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plaster etc, including welding, grinding, buffing, polished and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the raaling with necessary accessories & stainless steel dash fasteners stainless steelbolts etc. of required size, on the top of the floor of the side of waist slab with suitable, arrangement as per approval of Engineer-in-charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts fasteners etc.) Chap-10, Item No-12, SOR-2023-24 |
| 57 | ProvidingandfixingfactorymadeuPVCwhitecolourcasement/ Casement cum fixed glazed door comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded profilesdulyreinforcedwith1.60±0.2mmthickgalvanizedmild steelsectionmadefromrollformingprocessofrequiredlength (shape&sizeaccordingtouPVCprofile),uPVCextrudedglazing beadsofappropriatedimension,EPDMgasket,zincalloy(white powder coated) 3D hinges and one handle on each sideof panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners100x8mmsizeforfixingframetofinishedwalland necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shallbealsofusionweldedincludingdrillingofholesforfixing hardware\"sanddrainageofwateretc.Afterfixingframethegap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction ofEngineer-in-Charge.(Single/doubleglasspanesandsilicon sealentshallbepaidseparately).Variationinprofiledimensionin higher side shall be accepted but no extra payment on this account shallbemade.Note:ForuPVCframe,sashandmullionextruded profilesminus5%toleranceindimensioni.e.indepth&widthof profile shall be acceptable.Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) (CH-9S.I. No. 13 SOR 2022-23) |
| 58 | Providing and laying Vitrified tiles in floor of 500x 500mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints.Same as above but for 600X600mm size. |
| 59 | Black granite Polished stone flooring with 18mm thick marble stone as per sample of marble approved by Engineer-In-charge over 20mm (average) thick base of cement morter 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and pollshing complete with : Black Granite Stone quality, Chap-14, Item No-9/11.23A, SOR-2023-24 |
| 60 | Anti-Termite Treatment of the top surface of filled earth at the rate of 5 liters of emulsion per square metre of surface. Chap-8, Item No-3. SOR-2023-24 |
| 61 | Providing and fixing tiled false ceiling of approved materials of size 595x595mmintruehorizontallevel,suspendedoninterlocking metalgridofhotdippedgalvanizedsteelsections(galvanized@ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600mmcentretocentretoformagridof1200x600mmand secondary cross \"T\" of length 600 mm and size 24x25 mm made of0.30mmthick(minimum)sheettobeinterlockedatmiddleofthe 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture inthegridincluding,requiredcutting/making,openingforservices like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rodswith galvanised butterflylevelclipsofsize85x30x0.8mmspacedat1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for allheights asper specifications, drawings andas directed by Engineer-in-charge.(CH-12 S.I. No. 10 SOR 2023-24) |
| 62 | Painting top of roofs with bitumen of approved quantity @ 17 kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a place of cloth lighly soaked in kerosene oil complete : With residual type petroleum bituman of grade VG-10. Chap-11, Item No-1, SOR-2023-24 |
| 63 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coase sand : 4 graded stone aggregate of 20mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3(1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. Chap-11, Item No-6, SOR-2023-24 |
| 64 | 10 cm thick (average) mud phaska of damped brick earth on roof laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa @ 35 kg. per cum. of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: With common burnt clay F.P.S. (non modular) brick tile of class designation 10. (CH-11 Item No. 9 SOR 2023-24) |
| 65 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : in 75x75 mm deep chase. Chap-11, Item No-10, SOR-2023-24 |
| 66 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in RCC slabs or beams during laying including painting the exposed portion of loop, all as per standars design complete. Chap-10, Item No-9, SOR-2023-24 |
| 67 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :(CH-23 S.I. No. 16 SOR 2023-24) 25 mm nominal bore |
| 68 | Providing and fixing uplasticised PVC connection pipe with brass unions: (CH-23 S.I. No. 21 SOR 2023-24) 45 cm length - 20 mm nominal bore |
| 69 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (CH-24 S.I. No. 1 SOR 2023-24) |
| 70 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (CH-23 S.I. No. 7 SOR 2023-24)(B) 20mm nominal outer dia Pipes |
| 71 | (C) 25mm nominal outer dia Pipes |
| 72 | (E) 40 mm nominal outer dia Pipes |
| 73 | Providing and fixing of Angle Valve with Wall Flange (Make Jaquar). (A.R.) |
| 74 | Providing and fixing of Mixer Cock (Make Jaquar). (A.R.) |
| 75 | Providing and fixing of Sensor Faucet for Wash Basin (Make Jaquar). (A.R.) |
| 76 | Providing and fixing of Urinal (Make Jaquar). (A.R.) |
| 77 | Providing and fixing of Bidspa Rimless Wall Hung WC, I-Flush with concearled body and Cistern (Make Jaquar) (A.R.) |
| 78 | Supply and fixing of Urinal Sensor. (A.R.) |
| 79 | Supply and fixing of Bib cock. (A.R.) |
| 80 | Supply and fixing of Nahani Trap. (AR) |
| 81 | Supply and fixing of Steel Jali. (AR) |
| 82 | Supply and fixing of P-Trap. (AR) |
| 83 | Supply and fixing of Napkin paper holder. (AR) |
| 84 | Supply and fixing of Soap dispanser sensor. (AR) |
| 85 | Supply and fixing of Waste coupling popup. (AR) |
| 86 | Supply and fixing of Waste pipe. (AR) |
| 87 | Supply and fixing of Hanging seat cistern. (AR) |
| 88 | Supply and fixing of Concealed stop cock. (AR) |
| 89 | Supply and fixing of I-Flush Concealed Body. (AR) |
| 90 | Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent. (Ch-19 S.L. No. 2 SOR 2017-18) |
| 91 | Constructing brick masonary chamber for underground C.. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.L cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg). R.C.C. top slab with 1:2.4 mix (1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement: 5 fine sand. 10 graded stone aggregate 40 mm nominal size), inside plastening 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand), finished smooth with a floating cost of neat cement on walls and bed concretie etc complete as per standard design : (a) inside dimensions 455x610 mm and 45 cm deep for single pipe line with common bumt day FPS (nor modular) bricks of class Each designation M-150. (SOR- I NO-19.30) |
| 92 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 93 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 94 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : |
| 95 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : - 250 mm dia. R.C.C. pipe |
| 96 | Drilling of 200 mm. dia. T/W bore suitable for 110 mm. dia. Pipe all complete with labour T/P as per direction of E/I. (Jal Nigam Rate) |
| 97 | Supply and lowring of 110 mm. dia. 6 kg/m2 PVC pipe (Phenolex or apb by E/I.) all complete. (I.S.I. Mark only) SOR 2019-20 Chapter 23/32 |
| 98 | Supply and pouring of pea gravel suitable for T/W bore all complete as per direction of E/I. (If required) (Jal Nigam Rate) |
| 99 | S/F of 110 mm. PVC pipe adoptar suitable for Item No. 2 (Quotation Rate) |
| 100 | S/L of 1.5 H.P. submersible pump set 65 mt. head. (Pluga, Crompton, KSB etc.) I.S.I. mark all complete. (Water filled type only) (KSB Pump Ltd. Rate) |
| 101 | S/F of 1.5 H.P. submersible motor controlled starter pannel all complete. Crompton make. (I.S.I. Mark only) (Quotation Rate, KSB Make) |
| 102 | S/F of 25 mm. gate valve all complete. Approved Make. (Jal Nigam Rate) |
| 103 | S/F 4 sqmm. 3 core copper cable all complete. (Jal Nigam Rate) |
| 104 | S/L of 40 mm. dia. Red screen ASHIRBAD PVC pipe all complete. (Jal Nigam Rate) |
| 105 | S/F of M.S. clamp made with 65x6mm x600mm long M.S. strip suitable for 110 mm. dia. PVC pipe for holding all complete.(Jal Nigam Rate) |
| 106 | S/F of 10 mm. nylon rope for pump support all complete required for proper completion of work. (Market Rate) |
| 107 | Class-1500 brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work as per direction of E/Ic. (S.I.No.305 / 2017-18) |
| 108 | 12mm thick Cement plaster in single coat of fair side of single of half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm. In girth and finished even and smooth No. extra for mixing any additive. 1 cement : 4 fine sand (Not Less than in 1.25FM). (CH-13 S.I. No. 13.4.1 SOR 2023-24) |
| 109 | 20 mm. nominal outer dia. pipes. (Ch.-23, S.I. No. 9 B PWD Specification No. 18.9.2 / 2019-20) |
| 110 | 40 mm. nominal outer dia. pipes. (Ch.- 23, S.I. No. 9 (E) PWD Specification No. 18.9.5 / 2019-20) |
| 111 | C.I. cover with frame 110mm. Internal dia. & MS clamp for 40 mm. dia. pipe. (S.I. No. 68 PWD SOR 2019-20) (ISI mark only) |
| 112 | S/F of 20mm sizeC.I. bib cock with brass rod heavy quality complete. (UP PWD SOR 2019-20) S.I. No. 75 (b) (ISI mark only) |
| 113 | Providing and laying cement concrete in 1:2:4 of not less than strength of M 150 stone ballast (20 mm nominal size), approved coarse sand and cement, curing complete including of cost of form work in foundation and floors-completion of the work as per direction of the E/Ic. (Ch.- 5, S.I. No. 6 / SOR 2019-20) |
| 114 | Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work. (SOR-2018 S.I. No. 1139A) |
| 115 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash.But in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit (SOR-2018 S.I. No. 131C) |
| 116 | Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch and socket etc. complete in allrespect including matching colour wash. but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. (SOR-2018 S.I. No. 134C) |
| 117 | Wiring point for fan / fesh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc complete in all respect, including matching colour wash.but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper Conductor cable as earthwire drawn inside the conduit.(SOR-2018 S.I. No. 133C) |
| 118 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. CAT- AAA(SOR-2018 S.I. No. 1423) |
| 119 | Supply, receiving, storing, handling, assembling in position the following accessories as described below complete with all accessories, control gear as requred etc.(Mittal Associate file No-26/UPT/ADA/2017-18 Item No- Ex-46)Ceilling Mounted Fan (1200 MM) (QAR) |
| 120 | 20 W LED Lamp (QAR) |
| 121 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Mittal Associate file No-26/UPT/ADA/2017-18 Item No-Ex-43) Single pole |
| 122 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. ( (Mittal Associate file No-26/UPT/ADA/2017-18 Item No-Ex-44)40A |
| 123 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(H/28/3) (j ) 25 sq. mm 3-1/2 core |
| 124 | S & F surface/Flush mounting 4ways V TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. CAT A (SOR-2018 S.I. No. 1026C) |
| 125 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot DipGalvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified (SOR-2018 S.I. No. 725C) |
| 126 | Providing and Fixing ACP Sheet in Facade work on Toll Plaza …………….All Complete. (Rate as per lowest market quotation) |
| 127 | Part C&;wfVfyVh lsUVj dk fuekZ.k dk;Z ExcavationinfoundationinordinarySoil(Loam,Clayorsand) including,liftupto1.50MandleadUpto30mandincludingfilling wateringandrammingofexcavatedearthintothe trenchesor into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as per directed by the Engineer-in-charge up to a distance of 30 M from the foundation trenches.(CH-4 Item No. 1 SOR-2023-24) |
| 128 | Providing and laying cement concrete in 1:4:8 (1 Cement : 4 Coarse sand:8gradedstoneaggregate40mmnominalsize)andcuring complete, Including cost of form work. in Foundation and floors. (CH5 Item No. 2 SOR 2023-24) |
| 129 | Providing and laying D.P.C. 40mm thick with Cement concrete Consisting of One Part Cement, 1.5 Part of Coarse Sand and three part of approved 10mm grade stone grit and including water proofing material as directed by the Engineer-In-Charge in the proportion as specified by the manufacturer. (CH-7 S.I. No. 1 SOR 2023-24) |
| 130 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top to give smooth finish and proper grade. (SOR-2023-24-Ch-5 S.L. No. 3) |
| 131 | Class-150 (Non Modular) brick work in 1:4 Cement and Coarse sand mortarinfoundationandplinthincludingsupplyofallmaterials, labourandT&Petc.requiredforpropercompletionofthework.(CH-6 S.I. No. 2 SOR-2023-24) |
| 132 | Class-150 (Non Modular) brick work in 1:4 Cement and Coarse sand mortarinsuperstructureaboveplinthleveluptofloorfivelevel including necessary cutting and moulding of brick work as required andalsoincludinghoneycombedbrickworkinthicknessofwall more than 12cm. (CH-6 S.I. No. 2+5 SOR-2023-24) |
| 133 | Steelworkweldedinbuiltupsections/framedwork,including cutting,hoisting,fixinginpositionandapplyingaprimingcoatof approved steel primer using structural steel etc. as required. (CH-10 ItemNo.11SOR2022-23)Ingratings,frames,guardbar,ladder, railings, brackets, gates and similar works |
| 134 | Providing corrugated G.S. sheet roofing including Vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required1.00 mm thick with zinc coating not less than 275 gm/m² (CH-11 itemNo.3SOR2023-24) |
| 135 | RedSandStonework(machinecutedges)forwallliningetc. (veneerwork)upto10metreheight,backingfilledwithagroutof average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) includingpointinginwhitecementmortar1:2(1whitecement:2 stone dust) with an admixture of pigment matching the stone shade : (Tobesecuredtothebackingandthesidesby meansofcramps andpinswhichshallbepaidforseparately):Redsandstone- exposed face fine dressed with rough backing. (30mm thick) (CH-18Item No. 1 SOR 2023-24) |
| 136 | 12mmThickcementplasterinsinglecoatonfairsideofsingleor halfbrickwallforinteriorplasteringuptofloortwolevelincluding internal rounded angles not exceeding 80mm in girth, chamfers and finished even and smooth. (CH-13 S.I. No. 13.4.1. SOR-2023-24)(I) 1 cement : 4 Coarse sand |
| 137 | Earth work in cutting or in embankment in ordinary soil excavation to beintheformofaregularpitsnotexceeding0.50mindepthand earth work in embankment to be in 20cm layers including ramming anddressingthesurfacetorequiredlevelsandslopesandalso including 1.5 m lift and 30m lead. The earth in form of cutting (b) to beusedasspoilbankswithin50mdistanceasdirectedbythe Engineer-in-Charge. (CH-4 Item No. 253(a) SOR 2023-24) |
| 138 | Providingandlayingcementconcretein4:2:1ofnotlessthan strengthofM-150stoneballast(20mmnominalsize),approved coarse sand and cement, curing complete including of cost of form work in foundation and floors-completion of the work as per directionof the E / I. (CH-5 S.I. No. 4.1.3 SOR-2023-24) |
| 139 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete including curing the cost of all materials, labour, T & P etc complete.(CH-15 S.I. No. 13.26 SOR-2023-24) |
| 140 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work([email protected]/10sqmoverand including priming coat of exterior primer applied @ 2.20 kg/10 sqm) supply oa all labour material and T&P required for proper completionof work. (CH-15 S.I. No. 13.46 SOR-2023-24) |
| 141 | ProvidingandfixingfactorymadeuPVCwhitecolourcasement/ Casement cum fixed glazed door comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded profilesdulyreinforcedwith1.60±0.2mmthickgalvanizedmild steelsectionmadefromrollformingprocessofrequiredlength (shape&sizeaccordingtouPVCprofile),uPVCextrudedglazing beadsofappropriatedimension,EPDMgasket,zincalloy(white powder coated) 3D hinges and one handle on each sideof panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners100x8mmsizeforfixingframetofinishedwalland necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shallbealsofusionweldedincludingdrillingofholesforfixing hardware\"sanddrainageofwateretc.Afterfixingframethegap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction ofEngineer-in-Charge.(Single/doubleglasspanesandsilicon sealentshallbepaidseparately).Variationinprofiledimensionin higher side shall be accepted but no extra payment on this account shallbemade.Note:ForuPVCframe,sashandmullionextruded profilesminus5%toleranceindimensioni.e.indepth&widthof profile shall be acceptable.Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) (CH-9S.I. No. 13 SOR 2022-23) |
| 142 | Providing and laying Vitrified tiles in floor with lean concrete of 600x 600mmsizes(thickness10mm),withwaterabsorptionlessthan 0.08%andconformingtoIS:15622,ofapprovedbrand & manufacturer,indesiredcoloursandshades,laidwithcement basedhighpolymermodifiedquicksettileadhesive(waterbased) conformingtoIS:15477,includinggroutingofjoints.including preparation of 75mm thick base with concrete 1:4:8 complete as perE/I. (CH-14 S.L. No. 16 SOR 2023-24) |
| 143 | Black granite Polished stone flooring with 18mm thick marble stone, aspersampleofmarbleapporvedbyEngineer-in-charge,over 20mm(average)thickbaseofcementmortar1:4(1cement:4 coarsesand)laidandjointedwithgreycementslurry,including rubbingandpolishingcompletewith:BlackGraniteStonequality.(CH-14 Item No. 8 SOR 2023-24) |
| 144 | Providing and fixing tiled false ceiling of approved materials of size 595x595mmintruehorizontallevel,suspendedoninterlocking metalgridofhotdippedgalvanizedsteelsections(galvanized@ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600mmcentretocentretoformagridof1200x600mmand secondary cross \"T\" of length 600 mm and size 24x25 mm made of0.30mmthick(minimum)sheettobeinterlockedatmiddleofthe 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture inthegridincluding,requiredcutting/making,openingforservices like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rodswith galvanised butterflylevelclipsofsize85x30x0.8mmspacedat1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for allheights asper specifications, drawings andas directed by Engineer-in-charge.(CH-12 S.I. No. 10 SOR 2022-23) |
| 145 | Providing and fixing PVC pipe conforming to IS make working pressure 6 Kg/SqCm incuding testing labour T&P and all complete fittings. (CH-23 S.I. No. 32 SOR 2023-24) 110 mm diameter |
| 146 | b) 75 mm diameter |
| 147 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.(CH-23 Item No. 8 SOR 2023-24) 25 mm nominal outer dia pipes |
| 148 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :(CH-23 S.I. No. 16 SOR 2023-24) 25 mm nominal bore |
| 149 | Providing and fixing uplasticised PVC connection pipe with brass unions: (CH-23 S.I. No. 21 SOR 2023-24) 45 cm length - 20 mm nominal bore |
| 150 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (CH-24 S.I. No. 1 SOR 2023-24) |
| 151 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (CH-23 S.I. No. 7 SOR 2023-24) 40 mm nominal outer dia Pipes |
| 152 | Providing and fixing of Angle Valve with Wall Flange (Make Jaquar). (A.R.) |
| 153 | Providing and fixing of Table Top Wash Basin with Bottle Trap (Make Jaquar). (A.R.) |
| 154 | Providing and fixing of Urinal (Make Jaquar). (A.R.) |
| 155 | Supply and fixing of Bib cock. (A.R.) |
| 156 | Supply and fixing of Nahani Trap. (AR) |
| 157 | Supply and fixing of Steel Jali. (AR) |
| 158 | Supply and fixing of P-Trap. (AR) |
| 159 | Supply and fixing of Napkin paper holder. (AR) |
| 160 | Supply and fixing of W.B. counter granite. (AR) |
| 161 | Supply and fixing of Soap dispanser sensor. (AR) |
| 162 | Supply and fixing of Waste coupling popup. (AR) |
| 163 | Supply and fixing of Waste pipe. (AR) |
| 164 | Supply and fixing of Paper holder. (AR) |
| 165 | Supply and fixing of Concealed stop cock. (AR) |
| 166 | Supply and fixing of Cistern plate. (AR) |
| 167 | Supply and fixing of Soap disk. (AR) |
| 168 | Supply and fixing of I-Flush Concealed Body. (AR) |
| 169 | Supply and fixing of Rimless Single W.C. (AR) |
| 170 | Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent. (Ch-19 S.L. No. 2 SOR 2017-18) |
| 171 | Drilling of 200 mm. dia. T/W bore suitable for 110 mm. dia. Pipe all complete with labour T/P as per direction of E/I. (Jal Nigam Rate) |
| 172 | Supply and lowring of 110 mm. dia. 6 kg/m2 PVC pipe (Phenolex or apb by E/I.) all complete. (I.S.I. Mark only) SOR 2019-20 Chapter 23/32 |
| 173 | Supply and pouring of pea gravel suitable for T/W bore all complete as per direction of E/I. (If required) (Jal Nigam Rate) |
| 174 | S/F of 110 mm. PVC pipe adoptar suitable for Item No. 2 (Quotation Rate) |
| 175 | S/L of 1.5 H.P. submersible pump set 65 mt. head. (Pluga, Crompton, KSB etc.) I.S.I. mark all complete. (Water filled type only) (KSB Pump Ltd. Rate) |
| 176 | S/F of 1.5 H.P. submersible motor controlled starter pannel all complete. Crompton make. (I.S.I. Mark only) (Quotation Rate, KSB Make) |
| 177 | S/F of 25 mm. gate valve all complete. Approved Make. (Jal Nigam Rate) |
| 178 | S/F 4 sqmm. 3 core copper cable all complete. (Jal Nigam Rate) |
| 179 | S/L of 40 mm. dia. Red screen ASHIRBAD PVC pipe all complete. (Jal Nigam Rate) |
| 180 | S/F of M.S. clamp made with 65x6mm x600mm long M.S. strip suitable for 110 mm. dia. PVC pipe for holding all complete.(Jal Nigam Rate) |
| 181 | S/F of 10 mm. nylon rope for pump support all complete required for proper completion of work. (Market Rate) |
| 182 | Class-1500 brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work as per direction of E/Ic. (S.I.No.305 / 2017-18) |
| 183 | 12mm thick Cement plaster in single coat of fair side of single of half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm. In girth and finished even and smooth No. extra for mixing any additive. 1 cement : 4 fine sand (Not Less than in 1.25FM). (CH-13 S.I. No. 13.4.1 SOR 2023-24) |
| 184 | 20 mm. nominal outer dia. pipes. (Ch.-23, S.I. No. 9 B PWD Specification No. 18.9.2 / 2019-20) |
| 185 | 40 mm. nominal outer dia. pipes. (Ch.- 23, S.I. No. 9 (E) PWD Specification No. 18.9.5 / 2019-20) |
| 186 | C.I. cover with frame 110mm. Internal dia. & MS clamp for 40 mm. dia. pipe. (S.I. No. 68 PWD SOR 2019-20) (ISI mark only) |
| 187 | S/F of 20mm sizeC.I. bib cock with brass rod heavy quality complete. (UP PWD SOR 2019-20) S.I. No. 75 (b) (ISI mark only) |
| 188 | Providing and laying cement concrete in 1:2:4 of not less than strength of M 150 stone ballast (20 mm nominal size), approved coarse sand and cement, curing complete including of cost of form work in foundation and floors-completion of the work as per direction of the E/Ic. (Ch.- 5, S.I. No. 6 / SOR 2019-20) |
| 189 | Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work. (SOR-2018 S.I. No. 1139A) |
| 190 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash.But in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit (SOR-2018 S.I. No. 131C) |
| 191 | Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch and socket etc. complete in allrespect including matching colour wash. but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. (SOR-2018 S.I. No. 134C) |
| 192 | Wiring point for fan / fesh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc complete in all respect, including matching colour wash.but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper Conductor cable as earthwire drawn inside the conduit.(SOR-2018 S.I. No. 133C) |
| 193 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. CAT- AAA(SOR-2018 S.I. No. 1423) |
| 194 | Supply, receiving, storing, handling, assembling in position the following accessories as described below complete with all accessories, control gear as requred etc.(Mittal Associate file No-26/UPT/ADA/2017-18 Item No- Ex-46)Ceilling Mounted Fan (1200 MM) (QAR) |
| 195 | 20 W LED Lamp (QAR) |
| 196 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Mittal Associate file No-26/UPT/ADA/2017-18 Item No-Ex-43) Single pole |
| 197 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. ( (Mittal Associate file No-26/UPT/ADA/2017-18 Item No-Ex-44)40A |
| 198 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(H/28/3) (j ) 25 sq. mm 3-1/2 core |
| 199 | S & F surface/Flush mounting 4ways V TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. CAT A (SOR-2018 S.I. No. 1026C) |
| 200 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot DipGalvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified (SOR-2018 S.I. No. 725C) |
| 201 | Taking connection for electricity as per direction given by E/I. Payment to contractor after giving actual estimate by TORRENT Power Ltd.( L.S ) |
| 202 | Providing and Fixing ACP Sheet in Facade work on Toll Plaza …………….All Complete. (Rate as per lowest market quotation) |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
