Rotary Table Repair And Spare - Repair Work Disassembling The Rotary Table, Carrying Out Repair Work, Replacement Of Spares And Re-Fitting. Making An Over Sized Slot In The Oval Hole Thread Of The Rotary Table Housing. Contiguous Counter Rivet Installe, Jodhpur-Rajasthan

Rotary Table Repair And Spare - repair work Disassembling the rotary table, carrying out repair work, replacement of spares and re-fitting. Making an over sized slot in the oval hole thread of the rotary table housing. Contiguous counter rivet installed in rotary table, heating and fitting the new rivet. Making varying sizes by filling different sized goods on the count housing of the rotary table. Making seal size by filling oil seal size material on the counter housing of rotary table. Remaking the bush between the rotary table pinion bearing. Renew the bush between the rotary table dog nut. Opening the table pinion housing and refitting the pinion by replacing the bearing and pinion. Correct the bearing angle size by filling material on the bottom and top plate of the table. Correcting the oil seal size on the fletch by filling the material. Making bush size by loading material on dog nut fork. GM of fork shaft in table cover. Make a new bush and install it. Welding brass on roller riveting. Make a new one by re-machining the cowl. Contiguous rivet of the threaded head cowl and hot fitting of the new rivet. Correcting the bearing size by filling material on the tapered head main shaft. To adjust the oil seal size on the cated head main shaft. Making bearing size by welding brass on the cup of cated head. Correcting chain sprocket size by filling material on cated head shaft. Remaking the keyed head pinion shaft. Correcting the anvil seal size by filling material on the conical head pinion flange. Chain Sprocket 15 Teeth Bore and Key Making a new vase in front of the ketted Shapat Kaun. Opening of keyed shaft and keyed pinion shaft, cleaning of spares and new bearing oil seal. Installing and repairing and re-fitting. Opening all the chains, cutting the new chain to size and fitting it again. stuff -10 mm x 35 mm bolt washer -10 mm x 30 mm bolt with washer 3/8x 1bolt with washer 12 mm x 35 mm bolt with spring washer 12 mm x 50 mm stud with nut and spring washer -x 30 mm screw g.m. with nut -Small shifter g.m. Sand drum and lifting drum ball new making Catted shaft side plate new making Catted shaft flange new making as per sample and size. Oil seal 60 x 85 x 10 2. Oil seal 787 x 631 x 75. Oil seal 612 x 762 x 75 Oil seal 100 x 140 x 13. Pinion housing mounting plate new making. Yoke head guide bush g.m. with m.s. pipe 5. Rivet 12 mm x 65 mm Rivet 11 mm x 50 mm

Refer document

Refer document

INR 1.41 Lakhs /-