Work Of Street Lighting By Installing 01 9 Meter Decorative Pole With Light For Beautification Of Main Roads In The City. - Supplyofdecorative Poleof Durable Mild Steel With A Total Height Of 9Mtr Above Ground Level. Pole Bottom Base Section Shall Be 350X, agra-Uttar Pradesh

Work Of Street Lighting By Installing 01 9 Meter Decorative Pole With Light For Beautification Of Main Roads In The City. - Supplyofdecorative poleof Durable Mild Steel with a total height of 9mtr above ground level. Pole bottom base section shall be 350x200x1500mm, 4mm thickness column with predesigned laser cut Pattern to illuminate the surroundings in 20W with noticeable mode, next-section of double pipe of size 60x7500x3mm to work together to form unique design with mid-section of illuminated in warm white laser cut design with golden casting embellishment and predesign laser cut illuminated in Warm white 60W double arm bracket of 3900mm lang carrying street light fixture Hestia of 120W each. The base plate of pole shall be of size 550x350x12mm. Provision for inside termination box with 4way connector & 1nos 6 AMPS MCB for local isolation. Hestia light fixture shall be made of die cast aluminium of size 415x745mm for street light distribution. Light output of source is more than 110lm/ watt, CRI>80, SPD 4k, operating voltage 140-270V. Fitting is IP65, wired with Branded LED and constant current driver. Proper thermal management for longer life of fixture. Led burning of 50,000 hours. The pole is primarily coated with primer, secondary epoxy resin and top coated with UV stabilized powder coat and cured. The decorative pole is suitable for outdoor lighting application. Pole light is complete in all aspects with all accessories without foundation bolts 2 Supply and fixing ofLED Street light Fittinghaving die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect.. CAT- AAA (S.I No. 1424 PWD Schedule 2018) 3 Erection of Decorative pole strut in cement concrete 1:3:6 (1 cement : 3 Coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling and decured with holding Clamps, Bolts, nuts etc as required. 4 Supply and burying of 600mmx600mmx 6mmG.I.plate vertically for earthing with its top at least 3 meters below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG.G.I. wire will be extra) 30 cm square C.I framewith hinged cover masonary housing alternate layers of charcoal /coke and salt at least 150 mm thick alround etc. as per directions of Engineer –in-charge complete in all respects as per drawing ( This will apply for earthing of poles also)(S.I.No-702 PWD Schedule – 2018) 5 Supply and laying & burying of PN-6 PE-63 grade3 50mm dia 4mm thick high density polyethylene pipe with silicon coating as per IS- 4984 & manufactured by ISO- Certified firm in center channel divider complete in all respect (as per ADA rate). (HDC Pipe) 6 Supply and Wiring of submains with two nos. of 2.5 sq.mm.FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge. (S.I. No. 289 PWD Schedule 2018) 7 supply & fixing of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve(S.I No. 1002CAT B) PWD Schedule 2018) 8 Supply & Laying of 10 sq. mm 2 core aluminium conductorr PVC insulated armoured served sheathed cable 1100volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around protected with burnt bricks on sides and on top. On size or as directed by the Engineerr-incharge complete in all respect. The armouring of the cable shall be properly connectedwith the earth conductor by clamps etc. (SI No. 501(C) PWD Schedule 2018).

INR 5000 /-

INR 500000.0 /-

Refer document