|
| 1 | PRIMARY AIR HEATER, MODEL No.-27.5 VIM, 2000 BI-SECTOR |
| 2 | Static Seal assembly (Hot end) |
| 3 | Static Seal assembly (Cold end) |
| 4 | Retaining seal (5X160X1827) |
| 5 | Air seal housing assembly |
| 6 | 90° Barco swivel ball joint 1.5” 300 LBS for soot blower |
| 7 | Finger Tab for Radial seal |
| 8 | Finger Tab for Axial seal |
| 9 | Guide bearing air seal assembly (consist of followings )Aluminium seal assembly (upper)-01 no.Aluminium seal assembly (lower)-01 no.Spring-06 nos.Bolt -06 nos.Nut -06 nos.Lock nut-06 Nos.Washer -18 Nos.Pin -02 Nos.Seal ring retainer -01 no. |
| 10 | Bypass Bar Assembly (One set consist of 02 nos. By pass seal bar assembly for Hot End) |
| 11 | Hot Intermediate End Basket support Grating plates |
| 12 | Cold End Grating with support block |
| 13 | Soot Blower worm gear box |
| 14 | SECONDARY AIR HEATER, MODEL No.-30 VIM, 2000 BI-SECTOR |
| 15 | Static Seal assembly (Hot end) |
| 16 | Static Seal assembly (Cold end) |
| 17 | Retaining seal |
| 18 | Hot End Bypass Seal Bar Assembly (One set consist of 02 nos. By pass seal bar assembly) |
| 19 | Finger Tab for Radial seal |
| 20 | Finger Tab for Axial seal |
| 21 | Air Motor Model No. IPM-400, 8:1 Make: IEC Dusterlon |
| 22 | Machined T-Bar with fastener for HE 7 CE (M16X60- 500 nos., Plain washer- 500 nos.) |
| 23 | Soot blower pipe along with nozzle assembly |
| 24 | Guide bearing air seal assembly (consist of followings Aluminium seal assembly (upper)-01 no.Aluminium seal assembly (lower)-01 no.Spring-06 nos.Bolt -06 nos.Nut -06 nos.Lock nut-06 Nos.Washer -18 Nos.Pin -02 Nos.Seal ring retainer -01 no. |
| 25 | 90° Barco swivel ball joint 1.5\" 300 LBS for soot blower |
| 26 | Cold End Grating with support block |
| 27 | Pin Rack assembly |
| 28 | Soot Blower worm gear box |
| 29 | Other spares of APH (Common for PAPH & SAPH) |
| 30 | Complete Soot Blower valves (Poppet valve) without actuator(SB-47 to SB-50 APH SB line isolation valve NB-50, Type- DAHV, Operation- Pneumatic) |
| 31 | Over running clutch, size-FSO 500/30 make-Formspag / Diado-Sprag Ltd. |
| 32 | Kao wool Packing (size 1\"X2\"X25\") |
| 33 | Complete U clamp of air heater door |
| 34 | Twin Nozzle with adapter for soot blower |
| 35 | Oil seal 50 X 68 X08 mm |
| 36 | HT Bolt (Grade 8.8) M16X65 with one no. Metallic self lock nut & two no. Large dia. (OD- 48mm )Plain Washer |
| 37 | HT Hex. Screw (Grade 8.8) M 16X50 with one no. Metallic self lock nut & two no. Large dia. (OD- 48mm )Plain Washer |
| 38 | HT Hex. Screw (Grade 8.8) M 16X35 with one no. Metallic self lock nut & two no. Large dia. (OD- 48mm )Plain Washer |
| 39 | HT Hex. Screw (Grade 8.8) M 16X35 with one no. HT nut & two no. Large dia. (OD- 48mm )Plain Washer |
| 40 | HT Screw (Grade 8.8) M16X45 with one no. HT nut & two no. Large dia. (OD- 48mm ) Plain Washer |
| 41 | HT Screw (Grade 8.8) M16X60 with one no. HT nut & two no. Large dia. (OD- 48mm ) Plain Washer |
| 42 | HT Screw (Grade 8.8) M16X80 with one no. HT nut & two no. Large dia. (OD- 48mm ) Plain Washer |
| 43 | HT Screw (Grade 8.8) M20X90 with one no. HT nut, one no. Large dia. (OD- 60 mm) Plain Washer & two no. Large dia. (OD- 60 mm )Machined Washer |
