Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-12-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-12-2024 |
| Sl. No. | Item Description |
| 1 | Petty repair to leaking bib cock, pillar cock, stop cock, angle valve, gate valve of any size, brass spindle, waste pipe, shower rose, float valve,concealed stop cock, PVC connection of any description by changing of jumper washer, spindle for bib cock, pillar cock,concealed stop cock etc or putting M seal cleaning of air lock in the pipe for ensuring proper water Supply Repair/ replacement to leaking flushing cistern low/ high level/concelled flush cistern any type and make, incl adjustment in the internal fiiting replacement of syphon, washer/jumper, flush handle, lever etc as required , Petty repair for rectification of air lock in GI pipe and making the water Supply available upto water taps incl attending the complaints of no water Supply.repair to PVC bend, pipe etc, complete all as specified and as directed. |
| 2 | Notes:- a. The contractor shall make all arrangements for attendingdifferent types of complaints on every day basis. b. Contractor shall provide One Plumber with all necessary T&P on all working days from 08:30 AM to 5:00 PM at AGE B/R-I Complaint Cell.c. A recovery of Rs. 500/- per person shall be recovered from the contractor for non-deploying of Plumber on any working day.d. The contractor will ensure that the team of Plumber with necessary tools bag shall always remain present at Complaint Cell to attend the complaints.e. All the complaint slip, register & other connected documents will be provided and maintained by the contractor without any ext+B16ra cost. f. Proper record (date wise) of complaints received & rectified by the contractor and Attendance Register of Tradesman shall be maintained and shall be produced for the verification at the time of payment of each RAR/Bill in E8 section.g. The rate quoted by the tenderer are also included for taking down of unsv items and fixing of new items. |
| 3 | Attending complaint for repair to easing of any type of Doors/Window/Cup Board shutters and chowkhats,Glass door tightning,proper setting of glass door, dressing table, pelmets, plate rack incl Aluminum doors by tightening of hinges / handles / aldrop bolt / tower bolt / knobs, hasp and staple etc of any size / any number of panels for easy closing / opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, looking mirror, curtain rod etc complete including taking down joinery and refixing in the same place and replacement of minimum defective item if required like screws, nails, bits etc, complete all as specified and as directed. |
| 4 | Notes:- a. The contractor shall make all arrangements for attendingdifferent types of complaints on every day basis. b. Contractor shall provide One Carpenter with all necessary T&P on all working days from 08:30 AM to 5:00 PM at AGE B/R-I Complaint Cell.c. A recovery of Rs. 500/- per person shall be recovered from the contractor for non-deploying of Carpenter on any working day.d. The contractor will ensure that the team of Carpenter with necessary tools bag shall always remain present at Complaint Cell to attend the complaints.e. All the complaint slip, register & other connected documents will be provided and maintained by the contractor without any extra cost. f. Proper record (date wise) of complaints received & rectified by the contractor and Attendance Register of Tradesman shall be maintained and shall be produced for the verification at the time of payment of each RAR/Bill in E8 section.g. The rate quoted by the tenderer are also included for taking down of unsv items and fixing of new items. |
| 5 | Taking down and refixing in same opening after resecuring, easing and adjustingof Shutters(wooden/glass) of any description n exc 1 Sqm each complete all as specified and as directed. |
| 6 | Taking down and refixing in same opening after resecuring, easing and adjustingof Shutters (wooden/glass) of any description exc 1 Sqm and n exc 2 sqm each complete all as specified and as directed. |
| 7 | Taking down and refixing in same opening after resecuring, easing and adjusting of Shutters (wooden/glass) of any description exc 2 Sqm each complete all as specified and as directed. |
| 8 | Easing and adjusting with out taking down of Shutters (wooden/glass) of any description n exc 1 Sqm each complete all as specified and as directed. |
| 9 | Easing and adjusting with out taking down of Shutters (wooden/glass) of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified and as directed. |
| 10 | Easing and adjusting with out taking down of Shutters (wooden/glass) of any description exc 2 Sqm each complete all as specified and as directed. |
| 11 | Taking down and refixing in same opening tuffon glass door 12 mm thick including all necessary fittings such as floor spring, S/S bracket, lock,S/S handle etccomplete all as specified and as directed. |
| 12 | Taking down and refixing in same opening tuffon glass door 10 mm thick including all necessaryfittings such as floor spring,S/S bracket, lock, pivot & S/S handle etccomplete all as specified and as directed. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 14 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 15 | M&L for light shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 16 | M&L for dark shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 17 | M&L for light shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 18 | M&Lfor dark shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqmbut not exceeding 0.42 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 19 | M&L for joint free glazed ceramic coloured tiles on vertical surfaces 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed. |
| 20 | Taking up or down steel tubing and connections of 15 mm bore including removal from sitecomplete all as specified and as directed. |
| 21 | S&F 15 mm bore GI tubing, medium grade galvanised, with all fittings and fixedto walls and ceilings or laid under floors or in concealed, etc, complete all as specified and as directed. |
| 22 | Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; andcutting chases for concealed watertubing or concealed conduit wiring includingmaking good the disturbed surfaces, cutting not exc 10 cm girth, complete all as specified and as directed. |
| 23 | Supply only in repair PVC connections 450mm bore long with brass unions at both ends suitable for 15mm bore pipe, complete all as specified and as directed. |
| 24 | Supply only in repair waste fittings, 32/40 mm bore brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed. |
| 25 | Supply only in repair PVC waste pipe 32/40 mm bore for WHB and sinks etc complete all as specified and as directed. |
| 26 | Supply only in repair 15 mm bore angle valve/ stop valves, cast copper alloy , chromium palted, fancy type screwed down high pressure with crutch and butter fly handles , screwedwithiron pipes or for union, complete all as specified and as directed. |
| 27 | Supply only in repair bib tap brass chromium plated fancy type, long body with flange screwed down, screwed for iron pipe 15 mm bore, complete all as specified and as directed. |
| 28 | Supply only in repair 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts,screwed for iron pipe and fixed, complete all as specified and as directed. |
| 29 | Supply only in repair mixing valve 15 mm dia, CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin, including fittings etc, complete all as specified and as directed. |
| 30 | Supply only in repair chromium plated grating100mm dia of approved make including fixing in CM 1:4to floor/ nahni trap etc., complete all as specified and as directed. |
| 31 | Supply only in repair grating doom 125mm dia with waste hole of PTMT (minimum weight 40 gms) etc., complete all as specified and as directed. |
| 32 | Supply only in repair brass chromium plated overhead shower rose 125mm dia, with revolving jointwith swivel rod and fixed for15mm bore pipe, complete all as specified and as directed. |
| 33 | Supply only in repair chromium plated health faucet suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completeallas specified and as directed. |
| 34 | Supply only in repair plastic water closet seat cover, white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device etc, completeallas specified and as directed. |
| 35 | S&F in repair stainless steel sinks without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar on to dwarf wall or fixing with andincludingcantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm, complete all as specified and as directed. |
| 36 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) , white fixed in repair,includingplastic seat cover of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging device, complete all as specified and as directed. |
| 37 | Supply only in repair PVC valveless, syphonic action type flushing cisterns 10 ltrs capacity, low level, white, with inlet ball valves, float and handle including brackets and PVC flush pipe 32 mm dia for low level, complete all as specified and as directed. |
| 38 | S&F in repair vitreous china wash hand basin, white, flat back of size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets etc, complete all as specified and as directed. |
| 39 | S&F in repair stainless steel wire cloth, 0.63mm nominal dia or wire and sqm average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/ steel windows etc complete all as specified and as directed. |
| 40 | M&L for welding in repairs exc 2.5 cm but not exc. 5.0 cm in length thickness of metal be welded exc 6mm but n.exc 9mm, complete all as specified and as directed. |
| 41 | Supply only in repair aluminium sliding door bolt, 300 mm long,with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. |
| 42 | Supply only in repair MS butt hinges 100mm size, cold rolled, medium weightfixed with screws to wooden frames or welding to steelframes etc complete all as specified and as directed. |
| 43 | Supply only in repair extruded aluminium alloy handles, fabricated type, anodised, 150 mm size complete all as specified and as directed |
| 44 | Supply only in repair aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified and as directed. |
| 45 | Hacking out old broken glass (any thickness size and quality and description) from wooden/steel frames glazed with putty or fixed with beads etc complete all as specified and as directed. |
| 46 | S&F 4 mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and as directed. |
| 47 | Supply only in repair door closer hydraulically regulated universal type,sutiable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg of extruded aluminium section designation No-3 complete all as specified and as directed. |
| 48 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty & fixed as in repairincluding taking down old shutter and refixing in same opening after replacing floor springetc complete all as specified and as directed. |
| 49 | S&F in repair 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooded plugs with chromium plated brass screws and cup washers etc complete all as specified and as directed. |
| 50 | Supply only in repair brass chromium plated tubular towel rail, 20mm dia, \"D\" type 60cm long between flanges of brass CP, complete all as specified and as directed. |
| 51 | Supply only in replacement PVC handle for low level flushing cistern of any capacity complete all as specified and as directed. |
| 52 | Supply only in replacement complete Flushing Kit (containing handle, float valve, syphon, washer, PVC nut) etcfor PVC low level flushing cisterncomplete all as specified and as directed. |
| 53 | Supply only PVC washer for syphon i.e. for low level flushing cistern of any capacity 15 mm bore complete all as specified and as directed. |
| 54 | Supply only PVC washer for syphon i.e. for low level flushing cistern of any capacity 20 mm bore complete all as specified and as directed. |
| 55 | Supply only GI socket 15 mm bore ISI marked complete all as specified and as directed. |
| 56 | Supply only GI socket 20 mm bore ISI marked complete all as specified and as directed. |
| 57 | Supply only Elbow GI 15mm bore ISI markedcomplete all as specified and as directed. |
| 58 | Supply only Elbow GI 20mm bore ISI markedcomplete all as specified and as directed. |
| 59 | Supply only Elbow Reducer GI 15x20mm bore complete all as specified and as directed. |
| 60 | Supply only Elbow Reducer GI 15x25mmbore complete all as specified and as directed. |
| 61 | Supply only Nipple GI 15 mm bore and 100mm long ISI marked complete all as specified and as directed. |
| 62 | Supply only Nipple GI 20mm bore and 100mm long ISI marked complete all as specified and as directed. |
| 63 | Supply only Nipple GI 15mm bore and 50mm long ISI marked complete all as specified and as directed. |
| 64 | Supply only Nipple GI 20mm bore and 50mm long ISI marked complete all as specified and as directed. |
| 65 | Supply only running Nipple GI15mm bore and75mm long ISI marked complete all as specified and as directed. |
| 66 | Supply only Tee GI equal 15mm bore complete all as specified and as directed. |
| 67 | Supply only Tee GI equal 20mm bore complete all as specified and as directed. |
| 68 | Supply only TeeReducing G.I 15 x 20 mm bore complete all as specified and as directed. |
| 69 | Supply only TeeReducing G.I 15 x 25 mm bore complete all as specified and as directed. |
| 70 | Supply only Tank nipple 15/20 mm bore complete all as specified and as directed. |
| 71 | Supply only Union G.I 20 mm bore ISI Marked complete all as specified and as directed. |
| 72 | Supply only GI plug 15mm bore complete all as specified and as directed. |
| 73 | Supply only GI plug 20mm bore complete all as specified and as directed. |
| 74 | Supply only Socket reducer 15x20 mm bore, ISI Marked complete all as specified and as directed. |
| 75 | Supply only Sprindal (face) full turn/ half turn of any number complete all as specified and as directed. |
| 76 | Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 77 | M&L for 10mm thick rendering in CM 1:6 on faces of brick or concrete surface of walls finished even and smooth without using extra cement, complete all as specified and as directed. |
| 78 | M&L for 5mm thick rendering in CM 1:3 on concrete surfaces of ceiling, chajja,etc finished even and smooth, complete all as specified and as directed. |
| 79 | M&L for preparation of newly plastered surfaces of walls and applying 2 to 3 mm thick wall care putty on whole surfaces to achieve smooth, even and uniform surface including grinding with sand paper and levelling of surface and applying two coats of oil bound distemper of white or tinted colour over existing prepared putty base surface, complete all as specified and as directed. |
| 80 | M&L for preparation of newly plasered surfaces of walls/ceiling/Chajjas etc and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 81 | M&L for preparation of old surfaces of walls and applying two coats of white wash, complete all as specified and as directed. |
| 82 | M&L for preparation of old surfaces of ceiling and applying one coat of white wash, complete all as specified and as directed. |
| 83 | M&L for complete removal of existing treatment from external surfaces of walls by electrically operated grinder thereafter filling of holes and cracks with filler material and thereafter applying two coats of cement based paint over a coat of cement primer complete all as specified and as directed. |
| 84 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 85 | M&L for preparation of old steel surfaces of any description not otherwise described over 10 cms width or girth and applyingone coat of synthetic enamel paint, complete all as specified and as directed. |
| 86 | Demolition of brick work built in cement mortar or cement lime mortar etc, complete all as specified and as directed. |
| 87 | M&L for brick with sub class \"B\" bricks, straight or curvedon plan exc 6m mean radius built in CM 1:6, complete all as specified and as directed. |
| 88 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement)in CM 1:4, complete all as specified and as directed. |
| 89 | S&F in repair stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc, complete all as specified and as directed. |
| 90 | S&Fstainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc, complete all as specified and as directed. |
| 91 | Cutting of vegetable plant (girth not exceeding 300mm) from roof, terrace, chajjas etc digging out the roots and making good the surface in PCC 1:2:4 type B1 with surfaces finished to matchincluding scaffolding etc, complete all as specified and as directed. |
| 92 | Demolition of cement concreteof any description and in any position, complete all as specified and as directed. |
| 93 | M&L for cement concrete 1:2:4 type B0, using 12.50 mm graded stone aggregate, of thickness 25mm, as in roof padding alongwith liquid water proofing compound etc, complete all as specified and as directed. Note: Liquid water proofing compound shall be paid and measured seperately under respective item. |
| 94 | M&L for cement concrete type B1 (1:2:4), using 20mm graded stone aggregate as in roof kerbs or mud stop rounded or chamfered on edge etc., complete all as specified and as directed. |
| 95 | Supply only liquid water proofing compound, as per relevant IS complete all as specified and as directed. |
| 96 | S&F 500 ltr capacity tripple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC tank, complete all as specified and as directed. |
| 97 | S&F 1000 ltr capacity tripple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in positionincluding taking down old PVC tank, complete all as specified and directed. |
| 98 | S&F ball brass valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball screwed for iron pipe of 20/25 mm bore and fixed, complete all as specified and as directed. |
| 99 | S&F in repairs gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe of 20/ 25 mm borecomplete all as specified and as directed. |
| 100 | Demolition of reinforced cement concrete of any discription and in any position, including cutting of reinforcement from adjoining RCC component to faciliate demolition etc, complete all as specified and as directed. |
| 101 | M&L for RCC 1:2:4 typeB-0 using 12.50 mm graded stone aggregate(Nominal Mix) as in fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balusters, and the like etc, complete all as specified and as directed. |
| 102 | S&F TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including muld seel wire (annealed) not less than 0.9mm dia, complete all as specified and directed. |
| 103 | All as per item no 94 above but 5mm dia and over upto and including 10mm dia as in stirrups, complete all as specified and directed. |
| 104 | M&L for form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter, complete all as specified and as directed. |
| 105 | M&L for chipping of spelled and loose concrete and cleaning rust from reinforcement by sand blasting, scrubbing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as anti rust on all exposed reinforcement followed by a layer of bonding coat of a layer of epoxy adhesive on complete exposed surfaces of concrete and provide gunniting in two layers over steel welded mesh 2 mm dia of wire and total aperture 75 mm, thickness of gunite n.exc 25 mm thick (average thickness) using cement mortar 1 :2 with OPC 43 grade cement mixed with polycrete admixture @ 2 % by weight of cement or as per manufactures instructions and finally applying cement plaster over gunite surfaces ofrequired thickness to give an even uniform and smooth finish conforming to proper geometrics in cement mortar 1:4 to match with the existing surface as in side and soffits of slabs, chajjas, fins, facias, parapets, columns and beams etc complete including necessary scaffolding , shuttering necessarychased to brick work or RCC members at any height upto full height of buildings including removing of small trees shrubs etc complete all as specified and as directed. (Note: Steel mesh to be welded with the existing reinforcement. The cost of welded mesh is deemed to be included in the unit rate quoted.) |
| 106 | Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames), complete all as specified and as directed. |
| 107 | S&F factory made solid PVC door frame of size 50mmx 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per specification and drawing, complete all as specified and as directed. |
| 108 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strips of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , supplying and fixing in the frame at the site as per specification & drawing, complete all as specified and as directed. |
| 109 | S&F stainless steel butt hinges of size 100 mm complete, complete all as specified and as directed. |
| 110 | S&F stainless steel barrel tower bolts, 150 mm long, complete all as specified and as directed. |
| 111 | S&F stainless steel handles, 150 mm long, complete all as specified and as directed. |
| 112 | Supply only push button for concealed flush tank complete allas specified and directed. |
| 113 | Taking up or down steel tubing and connections for 20mm bore of pipe andremovalfrom site, complete all as specified and as directed. |
| 114 | S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid under floors or concealed etc, complete all as specified and as directed. |
| 115 | Refixing 15mm and 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) withfittings etc complete all as specified and as directed. |
| 116 | Blank |
| 117 | S&F SS railing buffing with sand paper with mechanincal means including cleaning of surface with soap and a clean sponge /brush, preparation of surface to make the railing to its original finish complete all as specified and as directed. |
| 118 | S&F in repairSteel rolling shutters of 1.25mm thick, with out ball bearing including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,push pull or manual type etc complete all as specified and as directed. |
| 119 | vnb |
| 120 | S&F in repair Ball bearing for rolling shutters complete all as specified and as directed. |
| 121 | Taking down Chowkhats or frames exc 1.5 sqm but n exc 4 sq. m each but with shutters (without taking off shutters from the frame)complete all as specified and as directed. |
| 122 | S&F Plain, solid, straight chowkats and frames in second class hard wood, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed. |
| 123 | M&L for preparation of undecorated surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 124 | M&L for preparation of undecorated surfaces and applying two coats of varnish over a coat of wood filler liquid transprant with oil staining complete all as specified and as directed. |
| 125 | S&F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane of 5.50mm thickness complete all as specified and as directed. |
| 126 | Supply only 32mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed. |
| 127 | Supply only 40mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed. |
| 128 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 129 | Dismantling structural steel work including doors wrought iron or mild steel gates but excluding framed truss not otherwise period for etc.complete all as specified and as directed. |
| 130 | S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 131 | M&L for preparation of undecorated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 132 | S&F 6 mm thick multiwall polycarbonate sheet (translucent/coloured) plain sheetingfixed with self tapping screws and washers, fixing masking tape over joint( filled with silicon ) in roof, wall etc complete all as specified and as directed. |
| 133 | S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturer complete all as specified and as directed. |
| 134 | Taking down shutters of any description n exc 1 sq. m each & removal from site complete all as specified and as directed. |
| 135 | Taking down shutters of any description exc 1 sq. m but n exc 2 sq. m each & removal from site complete all as specified and as directed. |
| 136 | Taking down shutters of any description exc 2 sq. m each & removal from site complete all as specified and as directed. |
| 137 | S&F 30 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 138 | S&F 30 mm thick factory made plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed. |
| 139 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 140 | M&L for 15mm thick AP Smartcare ready mix plaster cement plaster with bulk density 2040.82 Kg/Cum ,per ltr water ratio 15%-17%( potable water) By weight . With Compressive strength @7 days 6.1 Mpa( ASTM C 109), Tensile strength@ 7 days, 1.25 Mpa (ASTM C 307), Flexural Strength @7days, 3.71Mpa ( BS EN1051-11). Applied as per the Manufacturer\"s Instructions including necessary cement screed and preparation of surface to receive. Ready Mix Plaster upto G+5 storey Building including necessary scaffolding etc complete all as specified and as directed. Note : Rate quoted shall be up to G+5 storey Building including necessary scaffolding etc. |
| 141 | M&L for preparation of undecorated plastered surface and applying one coats with Graco-490 spray machine, of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6sqm/ltr after cleaning and removing dirt dust oil grease smog efflorescence stain, thoroughly brushing the surface and removal of existing paint flakes, to obtain an even surface, necessary tools and machinery to give an even shade etc complete all as specified and as directed.Note : Application to be done only by Applicator authorised by Manufacturer, which shall be approved by GE before starting of work. |
| 142 | M&L for preparation of newly plasered surfaces of ceiling and applying two coats of white wash over a coats of alkali resistant primer complete all as specified and as directed. |
| 143 | M&L for removal of existing loose treatment on wall/ceiling by scrapping with mechanicalvacuum based sanding machine (wall sanding machine with internal dust extraction system & having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7/9 inches to make the surfaces free from dust, loose paint etc by using smart periodical methodology/auto roller etc complete all as specified and as directed. |
| 144 | S&F pressed steel frames (105x60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed. |
| 145 | S&F pressed steel frames (125x60mm)for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed. |
| 146 | M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black japan paint complete all as specified and as directed. |
| 147 | S&F 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 148 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161- 1979 grade St.-240 complete all as specified and as directed. |
| 149 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 150 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 151 | M&L for providing and applying Smartcare Dampproof, fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibres having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @1.0 litre/sqm. Primary coat is self priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The application shall be carried out a scrapping and properly cleaning the surface to remove loose particles with wire brushes complete all as specified and as directed. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger/ Nerolac/STP Ltd. Notes: (a) The work shall be executed through Authorised Applicator of Manufacturer only. (b) Authorized Applicator shall be approved by GE before starting of work.(c) All materials shall be procured directly from the Manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers and will submitt in E-8 Section of GE office for their persual. |
| 152 | M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable o applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer (@ 10% of cement weight) modifies cementitious bond coat @ 2.2 kg cement/Sm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer including taking down existing roof treatment of any type and also taking down cement plaster on brick/concrete surfaces, including raking out joints, hacking of key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. and as directed. Make: Asian Paints or equivalent in Sikka, Fosroc and STP Ltd. Note: The application shall be executed on any type of surface and on horizontal/vertical areas |
| 153 | Dismantling boarding, wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc complete all as specified and as directed. |
| 154 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat iron of size 40 x 3 mm and 60mm long and expansion hold fasteners of 12.5mm dia and 40mm long complete all as specified and as directed. |
| 155 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and webof 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed tointermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. |
| 156 | S&F 4mmthick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling complete all as specified and as directed. |
| 157 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing etc complete all as specified and as directed. |
| 158 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing etc complete all as specified and as directed. |
| 159 | M&L 4 to 6mm thick ACP (Aluminium Composite panel) plain/wood grain finish fixed with screws under or above kitchen plateform and cup boards including Aluminium frame work,locking arragementand all fitting complete all as specified and as directed. |
| 160 | Supply only PVC magnetic catchercomplete all as specified and as directed. |
| 161 | S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc fitting complete all as specified and as directed. |
| 162 | S&F in repair 25 mm dia stainless steel rails with fixing brackets, stops, rollers,fittings etc complete all as specified and as directed. |
| 163 | S&Faluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 164 | S&Faluminium anodised door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 165 | S&Faluminium anodised window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 166 | S&Faluminium anodised grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed. |
| 167 | S&F in repair 150mm long double action spring hinges, mild steel with steel wire spring, stove enamelled black complete all as specified and as directed. |
| 168 | S&F in repair 30mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 169 | S&F in repair 40mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 170 | S&F in repair 100mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and as directed. |
| 171 | S&F in repair 150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and as directed. |
| 172 | S& F in repair 100mm long mild steel, semi-barrel tower bolt, open cover, with sheet pressed barrel, stove enamelled black with bright bolt complete all as specified and as directed. |
| 173 | S& F in repair 150mm long mild steel, semi-barrel tower bolt, open cover, with sheet pressed barrel, stove enamelledblack with bright bolt complete all as specified and as directed. |
| 174 | S&F in repair 100mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 175 | S&F in repair 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 176 | S&F in repair 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. |
| 177 | S&F in repair 300mm long aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 178 | S&F in repair300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 179 | S&F in repair 100mm long mild steel pressed handles, oval type, stove enamelled black |
| 180 | S&F in repair 150mm long mild steel pressed handles, oval type, stove enamelled black |
| 181 | S&F in repair 100mm long aluminium handles, cast type, anodised |
| 182 | S&F in repair150mm long aluminium handles, cast type, anodised complete all as specified and as directed. |
| 183 | S&F in repairMS mortice lock(4 lever), vertical type, size 100 mm complete all as specified and as directed. |
| 184 | S&F in repair brass mortice lock(4 lever), vertical type, size 100 mm complete all as specified and as directed. |
| 185 | S&F in repair100mm long hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 186 | S&F in repair100mm long hasp and staple,aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 187 | S&F in repair brass knob 35-40mm dia complete all as specified and as directed. |
| 188 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 189 | M&L for 75 mm thick PCC 1:4:8type D- 2, using 40mm graded stone aggregate as in sub base etc complete all as specified and as directed. |
| 190 | M&Lfor 60 mm thick, machine pressed precast cement concrete interlocking paver block with grey cement and pigment of any shape and size conforming to IS 15658-2006 of M-35 Grade, over and including 25 mm thick sand cushioning complete all as specified and as directed. |
| 191 | Dismantling stone slabs and tiles of any description or thickness in floors, laid, bedded and pointed in any type mortar, aprons etc complete all as specified and as directed. |
| 192 | M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 193 | M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 20 mm thick screed bed in CM 1:6 and jointed including rubbing and polishing etc complete all as specified and as directed. |
| 194 | M&L for machine cut kota stone slab flooring 20-25mm thick over and including 20 mm thick screed bed in CM 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc. complete all as specified and as directed. |
| 195 | Dismantling brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed. |
| 196 | M&L for screed bed or bedding layer of mortar15 mm thick for laying floor finishes in CM 1:4, mixed with water proofing compound complete all as specified and as directed. Note :- Water proofing compound shall be paid seperately. |
| 197 | M&L for preparation undecorated plastered surfaces on roofs and applying evenly a tack coat of industrial bitumen 85/25 at the rate of1.2 kg per sq.m including cleaning surfaces complete all as specified and as directed. |
| 198 | M&L for Priming roof surfaces and applying water proofing treatment over roofs comprising of the following complete all as specified & as directed:- |
| 199 | (a) Applying oil bound bituminous primer at the rate of 0.30 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated. |
| 200 | (b)Applying one coat of hot straight run bitumen @ 1.20 Kg/Sqm of grade 30/40 confirming to IS-73 (Grade S-35). |
| 201 | (c)Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyster matt, (weight not less than 160 gm/Sqm) with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer\"s instruction including preparation of surface. |
| 202 | M&L for preparation of undecorated plastered surfaces and applying one coat of heat resisting paint over acoat of priming paints plaster coat of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth complete all as specified and as directed. |
| 203 | Demolition and breakingup 75mm diadrain pipes (PVC drain pipe), set in solution, laid in trenches /wall etc complete all as specified and as directed. |
| 204 | Demolition and breakingup 100mm diadrain pipes (PVC drain pipe), set in solution, laid in trenches/wall etc complete all as specified and as directed. |
| 205 | S&F 75mmbore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed. |
| 206 | S&F 100mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 207 | S&F 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall etc complete all as specified and as directed. |
| 208 | S&F 110mmbore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall etc complete all as specified and as directed. |
| 209 | S&F 75mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 210 | S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 211 | S&F 75mm bore PVC (SWR) branch piece,(Single Y) equal or unequal complete all as specified and as directed. |
| 212 | S&F 110mm bore PVC (SWR) branch piece,(Single Y) equal or unequal complete all as specified and as directed. |
| 213 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. |
| 214 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. |
| 215 | S&F 75mm bore PVC (SWR) couplerscomplete all as specified and as directed. |
| 216 | S&F 110mm bore PVC (SWR) couplerscomplete all as specified and as directed. |
| 217 | S&F 75mm bore stack clamp madeout of 50 x 5 mmflat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and as directed. |
| 218 | S&F 100mm bore of pipe stack clamp made out of 50x5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roofs etc complete all as specified and as directed. |
| 219 | S&F 2mm thick fibre glass reinforced translucent/coloured plain sheeting with side lap fixed with coach screws and washers on roof, walls etc complete all as specified and as directed. |
| 220 | Note :- (i)The contract sum shall be after deducting the amount of Credit shown in Sch of Credit of this Tender.(ii) If anyitemofsame descriptionin nature is found to be entered as \"double in BOQ\"and the bidder quotes different rates against same item, then the rate quotedon lower sideshall be applicable and higher rate will not be allowed to be paid in any circumstances.No claims on this account shall beentertained on a later date. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
