Tender For General Fund Providing Mini Power Pump 2 Nos At Railway Feeder Road In Ward No.16
Tender Value
5 Lakhs
Estimated cost
Bid Submission
11 Dec 2024
0 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kadayanallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
General Fund Providing Mini Power Pump 2 Nos At Railway Feeder Road In Ward No.16 Providing Mini Power Pump 2 Nos At Railway Feeder Road In Ward No.16
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 2 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 3 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\" X 43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 4 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 |
| 5 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. |
| 6 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - |
| 7 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 8 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 9 | Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification. |
| 10 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
| 11 | Supply and Delivery of 1000 ltr HDPETankas per IS 12701/1996 including laodingunloading , Transportation and labour charges for fixing of the GI pipes and Specials for pipe connection works including cutting, threading and fixing charges etc |
| 12 | Geological suevey for new bore well point. |
| 13 | Supply and runof 2×4sq mm(56/0.3) PVCinsulated Single coreunsheathed Copper conductor cableof 1100V grade in 25mmdiaGI pipe (class B) suitably bent at both ends with necessary angleovorupright andendsupports for main.(SD-70) |
| 14 | Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1\"x1/8\"copper flat) on TW plank of size 375mmx300mmx19mm with supporting TW reepers of 1\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1No 40Amp 30MADoublePole RCD / RCCB(Lower End) with suitable necessary connection -SD 126 |
| 15 | Wiring with2×1.5 sq mm (22/0.3) PVC insulated SCunshethedon conductorof 1100V grade in suitable PVC rigidpipe on wallandceilywithPVC accessariesandwithTWsuitablebox and 5A F.T switcwithpaintingofsuitableglam foropen PVC light point / fan point. (SD-20) |
| 16 | Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb-SD 84 |
| 17 | Drilling to borewells of size 4\" to 5\"\" diain sedimentary formation using hand boresets including insertation ofcasingpipes and removalof casing pipes etc., including supplyingand packing of pebbles and conveyance of hand boresets including loading and unloading etc.,complete |
| 18 | Supplying andDelivery of 150mm dia PVC casing pipe asper IS12818/2010 includingcostMaterials and Transportationetc complete (CM) |
| 19 | Supplyand deliver ofsinglephase compressure motorwithISImarkingas per specificationfor the duty condition with suitable forinstallation in 110mm dia borewelletccomplete (1.50HP× m duty condition) |
| 20 | Supply of 1.50Hp compressuremotor\"s starter includingcostconveyancetosite etc complete. |
| 21 | Labour Charges for erection of Horizontal shaft, centrifigal pumpset (Coupled/Monoblock) in borewell/ Openwell including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves, pressure guages up to the exterior wall of pump room and erection of panel Board consisting of TPIC switches starter, Voltmeter, Ammeter, Capacitor single phasing preventor and laying and jointing the cables and twin earthing as per IE rules including providing bed blocks etc., Complete and operating the pumps and trail run for 10 days including signing of completeion of reports as required by EB Authorities (Up to 3 HP) |
| 22 | Supply of 1\" HDPE Hose |
| 23 | Supply of 1/2\" HDPE Hose |
| 24 | Supply of 1/2\"GI Pipe |
| 25 | Supply of 1\" CPVCPipe |
| 26 | Supply of 1\"x1/2\"Bore Coupling |
| 27 | Supply of Bore Bottom Valve |
| 28 | Supply of 20mm PVC Tap |
AI Tender Summary
Tender Timeline
Nov 29, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedDec 11, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 11, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender