|
| 1 | Item No. 1 :- Excavation for Foundation in Earth, Soils of all types, Sand, Gravel, Soft Murum including Shoring & Strutting, Dewatering as necessary & Disposing off Excavated Stuff as directed etc. complete. |
| 2 | Item No. 2 :- Excavation for Foundation in Hard Rock by Chiselling & Wedging or Line Drilling including Shoring & Strutting, Dewatering as necessary & Disposing off Excavated Stuff as directed etc. complete. |
| 3 | Item No. 3 :- Providing & Fixing 25 mm Diameter Steel Anchor Dowel in Hard Rock including Drilling Hole of 32 mm diameter up to 0.75 mtrs Depth, placing the dowel in position & effectively grouting the hole with C. M. 1:1 proportion etc. complete. |
| 4 | Item No. 4 :- Providing & Laying in Situ / Ready Mix Cement Concrete of M - 10 proportion with Trap / granite / quartzite / gneiss Metal in Foundation including necessary Form Work, Compacting & Curing etc. complete. (with Reversible Drum Type Mixer with SCADA with Fine Aggregates of required Specification (Natural Sand / VSI Sand finely washed etc.) |
| 5 | Item No. 5 :- Providing & Cast in Situ / Ready Mix M - 20 Grade Cement Concrete for Head Walls of C. D. Work / Retaining Walls etc. including necessary Form Work, Compaction, Finishing & Curing etc. complete. (with Reversible Drum Type Mixer / Concrete Batch Mix Plant (Pan Mixer) with SCADA with Natural / VSI Standard Artificial Sand) |
| 6 | Item No. 6 :- Providing & Laying Cement Concrete Pipe of IS 458:2003, NP - 2 Class of 900 mm Diameter in Proper Line, Level & Slope including providing & fixing Collars in Cement Mortar 1:2 & Curing etc. complete. |
| 7 | Item No. 7 :- Providing & Laying in Situ / Ready Mix M - 20 Grade Cement Concrete of Trap / granite / quartzite / gniess Metal for Wearing Course 8 cm. Thick including Compacting, Finishing, Curing & Filling in Joints with Bitumen etc. complete. (with Fully Automatic Micro Processor based PLC with SCADA enabled Concrete Batch Mix Plant / Pan Mixer with Fine Aggregates of required Specification (Natural Sand / VSI Sand finely washed etc.) |
| 8 | Item No. 8 :- Providing Cutting, Bending, Hooking, Tying & Laying in Position TMT - FE - 500 Steel Bars for Reinforcement for all R. C. C. Works as per Detailed Drawings etc. complete. |
| 9 | Item No. 9 :- Providing earth work in embankment with approved materials obtained from departmental land upto lead of 50m. including all lifts laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density etc. complete. (Material obtained from departmental Land) |
| 10 | Item No. 10 :- Providing Dry Trap / granite / quartzite / gneiss Rubble Stone Soling 15 cm. to 20 cm. Thick including Hand Packing & Compacting etc. complete. |
| 11 | Item No. 11 :- Providing & Fixing Name Board including Painting & Lettering which Describing Details of Such Work etc. complete. |
| 12 | QUALITY CONTROL MATERIAL TESTING CHARGES |
| 13 | 1. Basic Test of Cement |
| 14 | 1) Standard Consistency, Fineness, Specific Gravity, Setting Time (Initial & Final), Compressive Strength, Soundness (SSR P/I 495/1) |
| 15 | 2. Fine Aggregates |
| 16 | 1) Fineness Modulus (Sieve Analysis), Silt & Clay Content (SSR P/I 495/10) |
| 17 | 3. Basic Test of Aggregate |
| 18 | 1) Water Absorption, Specific Gravity, Impact Value / Crushing Value Test etc. Group Test (SSR P/I 495/2) |
| 19 | 4. Concrete |
| 20 | 1) Compressive Strength of C. C. Cube (Set of 3 Cubes) (SSR P/I 496/19) |
