|
| 1 | Supplying of different spare parts for reparing and maintenance purposes of tubewells under Debipur G.P. (Exluding GST & L.W.Cess) |
| 2 | Supplying, fitting and fixing Submersible of approved make (for 50 mm or 40 mm dia. tube well). (Market Rate ) (1.5 Horsepower,Brand-Kirloskar/Crompton Greaves) with all Electrical arrangements like Panel board,adopter with approx 10 mtr. Electrical Wire cable with Switch Board.(Market Rate ) Brand-Kirloskar/Crompton Greaves |
| 3 | Supply of 32 mm dia G.I. Pipe Tata Medium(10 ft length each) |
| 4 | Supply of 40 mm dia G.I. Pipe Tata Medium (10 ft length each) |
| 5 | Supply of PVC pipes & fittings(medium duty) confirming to ASTDM- 1785 and threated to match with G.I. pipes 1)PVC pipes 32mm dia. |
| 6 | 40 mm Pipe socket (G.I.) |
| 7 | 32 mm Pipe socket (G.I.) |
| 8 | Supply of PVC pipes & fittings(medium duty) confirming to ASTDM-1785 and threated to match with G.I. pipes 1)PVC pipes 40 mm dia. |
| 9 | Supply of PVC pipes & fittings(medium duty) confirming to ASTDM- 1785 and threated to match with G.I. pipes 1)PVC socket 32mm diamedium quality. |
| 10 | Supplying Brass Check Valve (Vertical),25mm. |
| 11 | Supplying PVC Check Valve (Vertical),25mm. |
| 12 | Supplying popular Maya pump no.6 or similar(Mandir head) 40mm dia cylinder type complete set. |
| 13 | Supplying of Base of pump no.6 , 40mm dia cylinder type. |
| 14 | Supplying only Mandir Head of popular Maya pump no.6 , 40mmdia cylinder type. |
| 15 | Supplying only Handle of popular Maya pump no.6 , 40mm diacylinder type( Heavy Duty). |
| 16 | M-II Hand pump Complete Set ( For 40mm dia TW cylinder type) |
| 17 | Supplying of Guide Bush for Mark-II Tubewell. |
| 18 | Supplying of 12mm dia.piston rod |
| 19 | Supplying of complete Chain set for Mark –II hand pump set. |
| 20 | Supplying of bearing for Mark-II hand pump set. |
| 21 | Supplying of 12mm dia.M S connecting rod including rodsocket.3.0m.Length. |
| 22 | Supplying of MS rod socket for 12mm dia.connecting rod including. |
| 23 | Supplying,fiting and fising 65mm dia.deep well brass cylinder. |
| 24 | Supplying,fiting and fising 65mm dia.deep well cast iron cylinder. |
| 25 | 4” PVC Bucket. |
| 26 | 2.5”PVC Bucket for cylinder. |
| 27 | 4” Leather Bucket. |
| 28 | 2.5” Leather Bucket for cylinder. |
| 29 | Plunger with valve (brass). |
| 30 | Plunger valve (brass). |
| 31 | Plunger rod. |
| 32 | White Zink.50 Gm PACK. |
| 33 | Nut bolt requird for TW (Mentioned size before putting rates) |
| 34 | “S” Clip |
| 35 | Nuky |
| 36 | Seat Valve |
| 37 | Bearing |
| 38 | Shaft |
| 39 | Chain |
| 40 | 40mm Brass Check Valve |
| 41 | ½”x1½” Nut Bolt |
| 42 | 40mm 1½” G.I. Short Piece |
| 43 | 2”x½” Nut Bolt |
| 44 | ½”x3” Nut Bolt |
| 45 | ½”x2½” Nut Bolt |
| 46 | 3/8 x1½” Nut Bolt |
| 47 | 3/8x2” Nut Bolt |
| 48 | ½” Washer |
| 49 | 3/8 Washer |
| 50 | 32 mm G.I. Short Piece. |
| 51 | 32 mm Brass Check Valve |
| 52 | Labour rates for repairing of 40 x 80 mm deep TubeWell Cylinder incl. opening,removing ,repairing damaged parts & re fixing and making the Tubewell in running condition. |
| 53 | Labour for replacing any part of Tubewell body, in/c opening & removing/repairing damaged parts & fixing & making the TW in running condition. |
| 54 | Repairing or replacing of 40mm dia connecting rods TW cylinder, includes opening & removing/repairing damaged parts & refixing and making the TW in running condition. |
| 55 | Bucket washing of 40/50 mm x 100mm dia Mark-II TW includes Hire & Labour charges all necessary equipments,in/c cost of bleaching powder,bucket,includes opening & refixing and making the TW in running condition. |
| 56 | Compressor washing of 40/50 mm x 100mm dia Mark-II TW includes Hire & Labour charges all necessary equipments,in/c cost of bleaching powder,bucket,includes opening & refixing and making the TW in running condition. |
| 57 | Skilled labour (Mistry) |
| 58 | Un-skilled labour (Labour) |
