Rural Development Local Bodies Closing in 0 days TDR #46433355

Tender For Material Supply For Workshed Ward 7 In Villiappally Grama Panchayat Under Mgnrega Annual Plan 2024-25 , Nregs Workshed Material Supply , Stone For Masonry Work , Portland Cement , Coarse Sand( Zone Iii) , Laterate Stone Of Size 40X20x15 Cm , St

Issued by Local Bodies · villiappally, Kerala
Tender Value
3.03 Lakhs
Estimated cost
Bid Submission
06 Dec 2024
0 days left
EMD
7576
Bank guarantee accepted
Document Fee
670
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
villiappally → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Material Supply For Workshed Ward 7 In Villiappally Grama Panchayat Under Mgnrega Annual Plan 2024-25 , Nregs Workshed Material Supply , Stone For Masonry Work , Portland Cement , Coarse Sand( Zone Iii) , Laterate Stone Of Size 40X20x15 Cm , Structural Steel Such As Tees,Angles,Channels, And R.S Joists , Red Oxide Zinc Chromate Primer , Adjustable Telescopic Prop 3 M(2.02-3.75M) , Beam Clamp 300-380 Mm (450-1070 Mm) , Stone Aggregate(Single Size): 20Mm Nominal Size , Stone Aggregate(Single Size): 10Mm Nominal Size , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Vibrator (Needle Type 40 Mm) , Twisted Steel/Deformed Bars , Mild Steel Tubes Hot Finished Welded Type , Welding By Electric Plant , Gi Trafford Profile Sheet 0.35Mm Thick , Bitumen Washer , Stainless Steel Screws 50Mm , Anjili Wood Scantls , Anjili Wood Planks , Fine Sand (Zone Iv) , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Top Cover For Rolling Shutters 1.25 Mm Thick , 27.5 Cm Long Wire Spring Grade No 2 For Rolling Shutters , Vitreous China Orrisa Type W.C Pan Size 580 Mm , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , 100 Mm S.C.I. Trap With Vent Heel , Stone Aggregate(Single Size): 40Mm Nominal Size , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50Hms/Litre , Acrylic Exterior Paint , Exterior Primer , Factory Made Door Frame Size 50X47 Mm With Wall Thickness 5 Mm Made Of Single Piece Extruded Profile , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished (Matt Finished) , Powder Coated M.S. Butt Hinges 100 Mm X 58 Mm X 1.9 Mm , Bright Finished Or Black Enameled Mild Steel Screws 40 Mm , Bright Finished Or Black Enameled Mild Steel Screws 20 Mm , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10Kh/Sqm) , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x1.90 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges50x37x1.50 Mm

BOQ

Name of Work: MGNREGS WORKSHED WARD 7 MATERIAL SUPPLY
Sl. No. Item Description
1NREGS WORKSHED MATERIAL SUPPLY
2Stone for masonry work
3Portland cement
4Coarse sand( zone III)
5laterate stone of size 40x20x15 cm
6structural steel such as tees,angles,channels, and R.S joists
7Red oxide zinc chromate primer
8Adjustable telescopic prop 3 m(2.02-3.75m)
9Beam clamp 300-380 mm (450-1070 mm)
10Stone aggregate(single size): 20mm nominal size
11Stone aggregate(single size): 10mm nominal size
12Hire charges of concrete mixer 0.25 to 0.40 cum with hopper
13vibrator (needle type 40 mm)
14Twisted steel/deformed bars
15Mild steel tubes hot finished welded type
16Welding by electric plant
17GI trafford profile sheet 0.35mm thick
18Bitumen washer
19Stainless steel screws 50mm
20Anjili wood scantls
21Anjili wood planks
22Fine sand (zone IV)
23Rolling shutter made of 80x1.25 mm machine rolled laths
24Top cover for rolling shutters 1.25 mm thick
2527.5 cm long wire spring grade no 2 for rolling shutters
26Vitreous china orrisa type w.c pan size 580 mm
27Flushing cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)
28100 mm S.C.I. trap with vent heel
29Stone aggregate(single size): 40mm nominal size
30Water thinnable cement primer for interior wall surface, having VOC content less than 50hms/litre
31Acrylic exterior paint
32Exterior primer
33Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile
3435 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)
35Powder coated M.S. butt hinges 100 mm x 58 mm x 1.9 mm
36Bright finished or black enameled mild steel screws 40 mm
37Bright finished or black enameled mild steel screws 20 mm
38Float glass sheet of nominal thickness 4 mm (weight not less than 10kh/sqm)
39Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm
40Bright finished or black enameled mild steel butt hinges50x37x1.50 mm

AI Tender Summary

OUR REF NO 46433355
AUTHORITY Local Bodies
TENDER VALUE 3.03 Lakhs
LAST DATE 06-12-2024
Authority
Authority Name Grama Panchayat
Work Description Tender for Material Supply For Workshed Ward 7 In Villiappally Grama Panchayat Under Mgnrega Annual Plan 2024-25 , Nregs Workshed Material Supply , Stone For Masonry Work , Portland Cement , Coarse Sand( Zone Iii) , Laterate Stone Of Size 40X20x15 Cm , Structural Steel Such As Tees,Angles,Channels, And R.S Joists , Red Oxide Zinc Chromate Primer , Adjustable Telescopic Prop 3 M(2.02-3.75M) , Beam Clamp 300-380 Mm (450-1070 Mm) , Stone Aggregate(Single Size): 20Mm Nominal Size , Stone Aggregate(Single Size): 10Mm Nominal Size , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Vibrator (Needle Type 40 Mm) , Twisted Steel/Deformed Bars , Mild Steel Tubes Hot Finished Welded Type , Welding By Electric Plant , Gi Trafford Profile Sheet 0.35Mm Thick , Bitumen Washer , Stainless Steel Screws 50Mm , Anjili Wood Scantls , Anjili Wood Planks , Fine Sand (Zone Iv) , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Top Cover For Rolling Shutters 1.25 Mm Thick , 27.5 Cm Long Wire Spring Grade No 2 For Rolling Shutters , Vitreous China Orrisa Type W.C Pan Size 580 Mm , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , 100 Mm S.C.I. Trap With Vent Heel , Stone Aggregate(Single Size): 40Mm Nominal Size , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50Hms/Litre , Acrylic Exterior Paint , Exterior Primer , Factory Made Door Frame Size 50X47 Mm With Wall Thickness 5 Mm Made Of Single Piece Extruded Profile , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished (Matt Finished) , Powder Coated M.S. Butt Hinges 100 Mm X 58 Mm X 1.9 Mm , Bright Finished Or Black Enameled Mild Steel Screws 40 Mm , Bright Finished Or Black Enameled Mild Steel Screws 20 Mm , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10Kh/Sqm) , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x1.90 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges50x37x1.50 Mm
Basic Detail
Tender No MGNREGS/6264/24
Bidding Type Tender
Location
City villiappally
State Kerala
Key Dates
Publish Date 28 Nov 2024
Submission Date 06 Dec 2024
Open Date 09 Dec 2024
Finance
Tender Value 3.03 Lakhs
Tender Fee 670
EMD 7576
Exemption Available
Document List
58a928f7-c1c6-49ae-b284-b147b7e3a834.html
AFFIDAVITSHG.pdf
BOQ_1114456.xls
FOTSHG.pdf
PAGSHG.pdf
SBDSHG.pdf
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 28, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 06, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Dec 09, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

58a928f7-c1c6-49ae-b284-b147b7e3a834.html

pdf

AFFIDAVITSHG.pdf

xls

BOQ_1114456.xls

pdf

FOTSHG.pdf

pdf

PAGSHG.pdf

pdf

SBDSHG.pdf

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders