|
| 1 | Supply of standard size single Bed of Size 1875mm x 900mm x 380mm height made of M.P. Teak wood Grade -I, using 12mm thick commercial ply (National Brand or equivalent) at bottom, 4 supports of minimum Size 65x40 cross wise and 2 supports Longitudinally fixed with side frame of 100mm width and 35mm thickness. End panels of 19 mm thick wooden Block Board and lamination (National Brand or equivalent) and of size not less then 750mm for Head rest Panel (450mm Laminated front top) and 300 mm for Rear Panel dully covered with Mat finished /laminated (Formica or equivalent teak finish shade) with proper edge beading of M.P. teak wood grade -I (6mm thick ). Provision of all four legs as continuous single member (either sides of panels) and of size 100mm x 40mm complete with spirit polish on exposed wooden surface of reputed and approved make work completed in all respect including all freight charges as per direction of Engineer - In -Charge. |
| 2 | Supply of standard size Double Bed of Size 2020mm x 1520mm x 380mm height made of M.P. Teak wood Grade -I, using 12mm thick commercial ply (National Brand or equivalent) at bottom, 4 supports of minimum Size 65x40 cross wise and 2 supports Longitudinally fixed with side frame of 100mm width and 35mm thickness. End panels of 19 mm thick wooden Block Board and lamination (National Brand or equivalent) and of size not less then 750mm for Head rest Panel (450mm Laminated front top) and 300 mm for Rear Panel dully covered with Mat finished /laminated (Formica or equivalent teak finish shade) with proper edge beading of M.P. teak wood grade -I (6mm thick ). Provision of all four legs as continuous single member (either sides of panels) and of size 100mm x 40mm complete with spirit polish on exposed wooden surface of reputed and approved make work completed in all respect including all freight charges as per direction of Engineer-In-Charge. |
| 3 | Supply of Executive high back chair with seat/back made of dimensions 50.0 cm (W) x 45.0 cm (H) (approx.) and overall height of Chair 90.0 cm (approx.) with a seat height of 55.0 cm (approx.) ; Overall width & depth of chair from pedestal 70.0 cm (W) x 70.0 cm (D) (approx.) ; Upholstered with fabric, High resilience polyurethane foam armrests and tubular frame; Center tilt mechanism, 360 degree revolving mechanism, 17 + /- 2 deg tilt on pivot at center, Upright position locking. Tilt tension adjustment Pneumatic height adjustment, Telescopic bellow assemble, Pedestal assembly with twin wheel castors of standard make of reputed and approve make work completed in all respect including all freight charges as per direction of Engineer-In-Charge. |
| 4 | Supply of visitor Cushioned chair with seat/back made up of dimensions 50.0 cm (W) x 45.0 cm (H) (approx.) and overall height of Chair 80.0 cm (approx.) with a seat height of 45.0 cm (approx.) ; Overall width and depth of chair from pedestal 55.0 cm (W) x 61.0 cm (D) (approx.) upholstered with fabric high resilence polyurethane from armrests and tubular frame of reputed and approved make work completed in all respect including all freight charges as per direction of Engineer-In-Charge. |
| 5 | Supply of sofa set (3+1+1) made of teak wood handles and frame made out of pine frame as per the approved model. All the exposedwooden partsto be made of solid teak wood withmelamine polish of approved shade. The size of the three seater will be 1775mm (I) X 775M (w) x 750mm (h) and single seater will be 725mm (I) X 775mm (w) x 750mm (h). The foam to be used 40 density P.U. foam with proper suspension and padding with springs to provide maximum support and comfort of reputed and approved make work completed in all respect including all freight charges as per direction of Engineer-In-Charge. |
| 6 | Supply of sofa set (3 seater) made of teak wood handles and frame made out of pine frame as per the approved model. All the exposedwooden partsto be made of solid teak wood withmelamine polish of approved shade. The size of the three seater will be 1775mm (I) X 775M (w) x 750mm (h). The foam to be used 40 density P.U. foam with proper suspension and padding with springs to provide maximum support and comfort of reputed and approved make work completed in all respect including all freight charges as per direction of Engineer-In-Charge. |
| 7 | Supply of dining chair of size 450 mm (l) x 500 mm (d) x 1000 mm (h). The chair to be made of teak wood and upholster to be done with 40 Density P.U foam and fabric as per wooden parts to be polished with melamine polish with approved shade of reputed and approved make work completed in all respect including all freight charges as per direction of Engineer-In-Charge. |
| 8 | Supply and fixing TV Cabinate of size 1.50 m (L) x 0.381 m (W) x 1.82 m (H) made of reputed and approved make work completed in all respect including all freight charges as per direction of Engineer-In-Charge. |
| 9 | Supply and fixing Table of size 90 cm (L) x 75 cm (W) x 60 cm (H) made of reputed and approved make work completed in all respect including all freight charges as per direction of Engineeb-In- Charge. |
| 10 | Supply and fixing computer table of size 1200 mm (L) x 600 mm (D) x 740 mm (H)of reputed and approved make work completed in all respect all freight charges as per direction of Engineer-In-Charge. |
| 11 | Supply and fixing Coffe Table of size 90 cm (L) x 75 cm (W) x 60 cm (H) along with glass top made of reputed and approved make work completed in all respect all freight charges as per direction of Engineer-In-Charge. |
| 12 | Supply of Round shape worthing fabric seating stool of dia 41 cm and height of 41 cmof approved design and colour, of reputed and approved make work completed in all respect including all freight charges as per direction of Engineer-In-Charge. |
