|
| 1 | Providingin place of main table with overall size of table 2350 x 2350 x 750mm. The main table shall be of size 2350 x 1150 x 750mm. The side unit shall be 1200 x 600 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing and anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. Product should be Greengaurd (UL) certified. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 2 | The Back Unit shall be of dimensions 2350 x 500 x 1150mm. It shall be made of 25mm thick MDF– one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters have a soft closing and anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security.Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. Product should be Greengaurd(UL) certified. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 3 | Providing and Placing High Back Chair with overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1 – 53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer and inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, and hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. Product should be BIFMA Level2 certified.The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 4 | Providing and Placing Visitors Chair with overall size of 60.9 W m x 64.2 D cm x 98.2 H cm x 44.8 Seat Height cm. The seat is cushioned seat made of injection molded plastic outer and inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, and hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The tubular frame is cantilever type and made of Ø2.54±0.03cm x 0.2±0.016 cm thick SS 202 tube. The back connected to frame through chrome plated high pressure die casted connector pipe. Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. Product should be BIFMA Level2 certified.The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 5 | Providingin place of main table with overall size of table 1650 x 1650 x 750mm. The main table shall be of size 1650 x 750 x 750mm. The side unit shall be 900 x 500 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing and anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. Product should be Greengaurd(UL) certified. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 6 | 1. SEAT ASSEMBLY: The seat is made up of 1.5 ± 0.1 cm thick hot - pressed plywood upholstered with fabric and moulded polyurethane foam. SEAT SIZE: 51.8cm (W) x 49.7cm (D)2. BACK ASSEMBLY: The Back is injection moulded in glass filled Nylon which is upholstered with Mesh fabric.The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 ±0.1 cm. BACK SIZE: 47.9 cm(W) x 66.9 cm (H)3. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45 plus /-2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression.4. ARMRESTS (ADJUSTABLE) :The height adjustable armrest is made of Polypropylene and can be adjusted to 6.0±0.1cm height.It also has swivel and To and Fro adjustment with moulded PU armtop.5. ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features:· 360° revolving type· Front-pivot for tilt with feet resting on ground and continuous lumber support ensuring more comfort.· Tilt tension adjustment can be operated in seating position.· 5 position Tilt limiter giving option of variable tilt angle to the chair.· Seat / back tilting ratio of 1:2.· The mechanism housing is made up of HPDC Aluminium and black powder coated (DFT 40 to 60 micron). 7. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 10.0 ± 0.3cm.8. PEDESTAL ASSEMBLY: The pedestal is injection moulded in 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is Ø66.1 ± 0.5 cm.(76.1 ± 1.0 cm. with castors).9. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in blackPolyamide having 6.0± 0.1cm wheel Diameter.Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. Product should be Greengaurd(UL) certified. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 7 | The seat is made up of 1.5 ± 0.1 cm thick hot - pressed plywood upholstered with fabric and moulded polyurethane foam. SEAT ASSEMBLY: 47.00CM (W) X 45.70CM(D). The Back is injection molded in Glass filled Polypropylene which is upholstered with Mesh fabric.The back is connected to tabular frame structure. BACK SIZE: 48.00 cm(W) x 57.60 cm(H). The polyurethane foam for seat is of density= 48 ± 3kg/m. The arm is made of injection molded in Glass filled Polypropylene which is connection to seat and back together. Caps are provided to hide Armrest tubular frame joinery. The armrest support is made of injection molded in Glass filled Polypropylene which is fixed to tubular frame. The powder coated (DFT 40-60 micron) tubular frame is cantilever type and made of Ø2.5±0.03 cm x 0.2±0.016 cm thk MS ERW tube.The Shoe is made of injection molded in Glass filled Polypropylene, fixed on the tubular frame from bottom side. Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. Product should be Greengaurd(UL) certified. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 8 | Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat should bemade of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should beupholstered with fabric or leatherette. 2) BACK FOAM: The back should bemade of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should bemade up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should bea welded assembly made in Stainless steel (grade SS 202) tube and plate with plastic endcap. Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 9 | Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x 905D x 855H. The seat should bemade of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should beupholstered with fabric or leatherette. 2) BACK FOAM: The back should bemade of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should bemade up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should bea welded assembly made in Stainless steel (grade SS 202) tube and plate with plastic endcap. Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 10 | Glass shall be 10 plus /-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shallbe a welded assembly made in SS202 grade having dia. 12 plus /-0.04 as per IS:1762. overall dimensions oftable shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm. Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 11 | Glass shall be 10 plus /-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shallbe a welded assembly made in SS202 grade having dia. 12 plus /-0.04 as per IS:1762.overall dimensions oftable shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm. Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 12 | Poviding Storage Units. The overall dimensions of it shall be 1200 x 450 x 1200mm. It shall be made from Pre laminated Particle board of 25mmm and 18mm thickness with 0.8mm thick CRCA metal cladding from outside. Side metal cladding is coated with Epoxy polyster powder of 50 microns. It shall be provided with 11mm thick bent metal tops made of 0.8mm thick CRCA. In case of HDU, the doors are made from 18mm thick Pre laminated particle board with decorative laminate on one side and backing laminate on other. Uniformly distributed load capacity of each shlef is 40 kg maximum. THe skirting units, if required, areprovided with 150mm skirting made from 0.8mm thick CRCA. Back panels are made from 18mm thick PLB. It is made from 0.5mm and 0.6mm thick CRCA (D Grade, IS-513)-It is used to keep planter pots on the storage units,LFC and locker units.-All metal panels are coated with Epoxy polyster powder of 50±10 microns thickness-8` Plastic Planter plates included in planter for the first time-Plant pots are not included in Planter. Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. Product should be Greengaurd(UL) certified. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 13 | Providing and Placing in position Desk based system that has been designed to give a richer work experience in modern offices. The system should cater to different work activities with well-equipped layouts and zones created by the system’s different elements. Worktop: Worktop shall be made of 25MM thick Pre-Laminated Board conforming to IS: 12823. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The worktop shall be complete with provisions for screen mounting as well as for wire management on the workstation. Provisions for fixing of the switches shall be on the wire tray/channel. Access flaps with soft closing technology shall be provided on the table tops to access the switch points on the tray. Pentagonal workstations of size 1200mm x 600mm. Understructure: The legs shall be connected to the understructure with the help of PDC Connectors to provide a stable and sturdy base for the worktops. Modesty panel shall be of Metal 1.2 mm thick CRCA. Wire Management: It shall be a part of the understructure and can be in the form of enclosed metal tray or 2 level enclosed channel to provide concealed wire management throughout the cluster formation. Wire riser leg or independent wire risers shall be provided as per the layout structure. Mobile Drawer : Mobile Drawer Unit having 3 Drawers Unit having flat metal front and top with Central locking. The Drawer Unit consistes of 2Box and 1File Drawers. The Overall size of the Drawer Units is 450mm(W) X 435mm(D) X 646mm(H). Construction and Material of Drawer Unit : Welded Assembled of 0.8 thick CRCA for Body Shell, Drawer Front and tray, Front Side Stiffener, Rear Side Stiffener and Bottom, 1.2 thick CRCA Top Stiffener and Bottom stiffener. Drawer Fronts and Metal Front Straight Edge. All Drawers with Double extension precision ball slide shall be provided. For Drawer pulling, side wise tapered recess provided in shell behind Drawer Fronts. Locking:10 lever Cam Lock and Central Right Hand locking with actuator and lock channel mechanism. Top Panel : 0.8 Thick Metal Straight Edge Top. Castors : Swiveling non-lockable 4Nos Castors mounted below the body shell. The Total drawer unit is finished with Epoxy Polyester Powder coated to the thickness of 50 microns ( plus /-10). Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. Product should be BIFMA Level2 certified.The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 14 | MOTION MESH BACK CHAIR WITH ADJUSTABLE ARMRESTT* The plastic sub-assemblies are available in white or grey colour for all above options with complementingpowder coating on metal surfaces wherever applicable.1. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filledPoly-amide, moulded Polyurethane foam and upholstered with high stretch knitted polyester fabric.The Back is injection moulded in glass filled Polypropylene which is upholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 3.0 ±0.1 cm.* Mesh Back Size : 45.5 cm. (W) x 54.0 cm. (H)* Seat Size : 48.5 cm. (W) x 49.0 cm. (D)2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and backcushion is moulded in Density Min 48 kg/m³, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression.3. TILT MECHANISM, SPINES and SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The `S` shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which is inbuilt in seat base and the tension (return force) is user weight dependent.4a. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide. The height adjustment feature is button operated having adjustment of 6.6±0.5cm. The Armrest Top is made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide.4b. FIXED ARMRESTS: The assembly is having Fixed arm rest structure moulded in glass-filled Poly-amide. The Armrest Top is made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide.5. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm6. PEDESTAL ASSEMBLY: The pedestal is injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal is 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors. 7.TWIN WHEEL CASTORS: 5 nos. twin wheel castors are injection moulded in Poly-amide having 5.0±0.1cm wheel diameter and assembled to the pedestal. Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. Product should be BIFMA Level2 certified.The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 15 | Work Surface: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap along with a Gromett is provided on work surface for wire management. Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 plus 3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel and Side Skirting: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade. confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.TOP shelf: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door plus Drawer unit: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Essential Accessories: Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management.Organizer Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag hanging. Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. Product should be Greengaurd(UL) certified. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 16 | Body - a. Side panels, Frame and Cross L bracket are made using 0.8 mm CRCA (IS:513).b. The assembly consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles. The tie rods are fixed in a shape of ‘X’The tie rods are made of 4mm diameter rods of MS while fixing brackets are made of 2mm thick. CRCA IS:513 Grade.c. Optional wooden panel of 25mm thk PLT, E1-P2 grade board for PLT ref. Specification - FF04/DSN/STD/101, edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glueUnder Structure - Under structure is made of 0.8m CRCA (IS:513).b. Sizes of under structure for single body :1. 1200W x 595D x 80HShelves - a. Shelves used are 10 bend panel made of 0.8mm CRCA (IS:513).b. Shelf panels are placed on shelf support and then fixed using nut and bolts from below.c. Standard config. consists of 6 loading levels formed by 5 no of adjusted shelf for each main and add on unit.d. Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum.Construction- Completely Knock down constructionFinish-All MS sheetmetal and metal frame components are powder coated with epoxy polyester powder to the min thickness of min 45 microns.Stackability- The add-on units can be stacked width wise to form a bank of racks having common side panel up to 4800WShelves back stiffener - At the rear side of the shelves back stiffeners are provided. These act as separators made of 0.8mm THK CRCA (IS:513). Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. Product should be Greengaurd(UL) certified. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 17 | WORKTOP (PU) Worktop is made of 25mm MDF OSR with pu matt finish on top side. Hardness on top surface is 2H.The worktop is available in 5 shapes: viz.: Circle, Bite, Rectangle, Square and FaceUNDER-STRUCTURE: The under-structure consists of an InnerTube Assembly with Top Plate, for Worktop Mounting, and an Outer Tube Assembly with Round/Rectangle/Square Bottom Plate. The Inner and Outer Tube Assemblies are telescopically connected. The Top Plate is made of 5mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) and the bottom plate is made of 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 082.5 x 2thk ROUND ELECTRIC RESISTANCE WELDED Tubes (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS Welding. The Outer Tube Assembly is madeof 089 x 2.5 thk and ROUND ELECTRIC RESISTANCE WELDED Tubes (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS Welding. The whole structure is EPDXY POLYESTER Powder Coated (DFT 40-60 microns). The product has a knock-down construction. It is assembled using alloy steel hardware (blackened and coated with rust preventive oil).Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 18 | WORKTOP (PU) Worktop is made of 25mm MDF OSR with pu matt finish on top side. Hardness on top surface is 2H.The worktop is available in 5 shapes: viz.: Circle, Bite, Rectangle, Square and FaceUNDER-STRUCTURE: The under-structure consists of an InnerTube Assembly with Top Plate, for Worktop Mounting, and an Outer Tube Assembly with Round/Rectangle/Square Bottom Plate. The Inner and Outer Tube Assemblies are telescopically connected. The Top Plate is made of 5mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) and the bottom plate is made of 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 082.5 x 2thk ROUND ELECTRIC RESISTANCE WELDED Tubes (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS Welding. The Outer Tube Assembly is madeof 089 x 2.5 thk and ROUND ELECTRIC RESISTANCE WELDED Tubes (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS Welding. The whole structure is EPDXY POLYESTER Powder Coated (DFT 40-60 microns). The product has a knock-down construction. It is assembled using alloy steel hardware (blackened and coated with rust preventive oil).Company should be ISO-9001, 14001, 45001, Greenguard (UL), BIFMA and AIOTA. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 19 | Work top Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access panels provided with soft closing hingesUnderstructure The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added `at bottom edges for improving the aesthetics. The product has a knock-down construction.Wire Management Bottom cabinet with door is provided for flow of wires and cables. Cutout provision below Access flap at four locations for standard 8 module Anchor Roma is provided. Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. Product should be Greengaurd(UL) certified. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 20 | Providing and Placing in position Main Table Overall size of the table shall be 3000 W mm x 1050 D mm x 740 H mm. Table top shall be made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges shall be edge banded with matching 1mm thick veneer lipping. Leather pad shall be made of 18mm Thick (±1) MDF with Leatherette wrapped around top surface. This leather pad shall be fixed to main top panel. Top panel and drawer unit modesty panel shall be made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges shall be edge banded with matching lipping. Remaining construction shall be of 18mm Pre-laminated twin board (PLT), Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer shall be made of 9mm thick particle board with leatherette on top surface. Drawer unit shall be provided with soft closing channels for smooth opening and closing. Drawer unit shall be secured with side central lock. Top panel and open storage unit modesty panel shall be made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges shall be edge banded with matching lipping. Remaining construction shall be of 18mm Pre-laminated twin board (PLT), Edge banded with matching 2 mm thick PVC lipping. Modesty panel shall be made of 18mm Thick Pre-laminated twin board (PLT), Edge banded with matching 2 mm thick PVC lipping. Modesty shall be fitted with aluminum trims. Understructure shall be made of 18mm Thick Pre-laminated twin board (PLT), Edge banded with matching 2 mm thick PVC lipping. Door shall be fixed with soft closing hinges and handle is provided for ease of opening. Also lock shall be provided on side panel for security. Soft closing access flap shall be provided with power box contains 3 Universal Sockets, 2 USB power points, 1 HDMI connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6 connections. Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 21 | Overall Size :Chair :Length : 45cmWidth : 45cmHeight : 95cmCushion Seat :Length : 45cm Width : 45cm Height : 50cm METAL MATERIALS : (gaugeplus /- 0.1mm):Material:NUT and WASHER WOODEN MATERIALS :Material:SHEESHAM SOLID WOO. Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 22 | Supplying and Placing in position Faculty Table of following Specifications. Overall Dimension of the Main Desk Shall be - 1500mmW x 600mmD. The system shall be a desk-based system with a platform understructure made up of a combination of MS. Tubes and plates. The product should be Greenpro certified and should be listed in Griha product catalogue in the following category GRIHA V.3 criteria: 34: GRIHA V.2015 criteria: 31 and SVAGRIHA criteria: 14. Understructure - The slanted legs are connected to the understructure with the help of PDC Connectors to provide a stable and sturdy base for the worktops. Modesty panel shall be of Acrylic (8 mm thick Acrylic both side frosted) or of Metal 1.2 mm thick CRCA. Worktop - Worktop shall be made of 25MM thick Pre-Laminated Board conforming to IS: 12823. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The worktop shall be complete with provisions for screen mounting as well as for wire management on the workstation. Provisions for fixing of the switches shall be on the wire tray/channel. A Wire Management - It shall be a part of the understructure and can be in the form of enclosed metal tray or 2 level enclosed channel to provide concealed wire management throughout the cluster formation. Wire riser leg or independent wire risers shall be provided as per the layout structure.ccess flaps with soft closing technology shall be provided on the table tops to access the switch points on the tray. Pedestal having 3 Drawers Unit having flat metal front and top with Central locking. The Drawer Unit consists of 2Box and 1File Drawers. The Overall size of the Drawer Units is 450mm(W) X 435mm(D) X 646mm(H). Construction and Material of Drawer Unit :Welded Assembled of 0.8mm thick CRCA for Body Shell, Drawer Front and tray, Front Side Stiffener, Rear Side Stiffener and Bottom, 1.2mm thick CRCA Top Stiffene, Bottom stiffener, Drawer Fronts and Metal Front Straight Edge. All Drawers with Double extension precision ball slide shall be provided. For Drawer pulling, side wise tapered recess provided in shell behind Drawer Fronts. Locking:10 lever Cam Lock and Central RH locking with actuator and lock channel mechanism. Top Panel : 0.8mm thick Metal Straight Edge Top. Castors : Swiveling non-lockable 4Nos Castors mounted below the body shell. The Total drawer unit is finished with Epoxy Polyester Powder coated to the thickness of 50 microns ( plus /-10).Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. Product should be BIFMA Level2 certified.The product shall be of Godrej/ Haworth/ Steelcase make only. |
| 23 | Supplying and Placing in position Faculty Table of following Specifications. Overall Dimension of the Main Desk Shall be - 900mmW x 600mmDThe system shall be a desk-based system with a platform understructure made up of a combination of MS. Tubes and plates. The product should be Greenpro certified and should be listed in Griha product catalogue in the following category GRIHA V.3 criteria: 34: GRIHA V.2015 criteria: 31 and SVAGRIHA criteria: 14. Understructure - The slanted legs are connected to the understructure with the help of PDC Connectors to provide a stable and sturdy base for the worktops. Modesty panel shall be of Acrylic (8 mm thick Acrylic both side frosted) or of Metal 1.2 mm thick CRCA. Worktop - Worktop shall be made of 25MM thick Pre-Laminated Board conforming to IS: 12823. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The worktop shall be complete with provisions for screen mounting as well as for wire management on the workstation. Provisions for fixing of the switches shall be on the wire tray/channel. A Wire Management - It shall be a part of the understructure and can be in the form of enclosed metal tray or 2 level enclosed channel to provide concealed wire management throughout the cluster formation. Wire riser leg or independent wire risers shall be provided as per the layout structure.ccess flaps with soft closing technology shall be provided on the table tops to access the switch points on the tray.Company should be ISO-9001, 14001, 45001, Greenguard(UL), BIFMA and AIOTA. Product should be BIFMA Level2 certified.The product shall be of Godrej/ Haworth/ Steelcase make only. |
