|
| 1 | Dismantling worn out wall or ceiling of Tarja or Durmamat and removing the dismantled materials as directed. |
| 2 | Dismantling carefully wooden walling, flooring of ceiling and stacking dismantled materials as directed. |
| 3 | Dismantling carefully wood work in posts,postplates, rafters, partition etc., sorting and stacking serviciable materials at site and removing rubbish as directed. |
| 4 | Taking out carefully Paver blockfrom old footpath and stacking properly at suitable place nearer site etc. complete |
| 5 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. |
| 6 | Taking out stone slabs of flat V-shaped drain of road sideand resetting the same to correct line and level with cement mortar (1 : 4) including cement pointing (1 :2)a) Vertical kerb stone. |
| 7 | Relaying & resetting interlocking paver block 60 mmof any shade and of approved quality over 75 mm thick medium sand as per IS:1237 -1980 laid in pattern as directed in pavement,Footpath,drive way etc. including necessary underlay complete in all respect with all labour and materials (Border concrete if necessary to be paid seperately) |
| 8 | Supplying & laying as per IRC-SP:063-2004 paver unit of anyshade of approved quality as per relevant IS code, laid inpattern as directed in pavement, footpath, driveway (paverblock only), etc including necessary underlay complete in allrespect with all labour and material.[Border concrete if necessary to be paid separately].Note: Sub-grade CBR should not be less than 5.60 mm thick interlocking designer concrete paver block M 35 grade for light-traffic zone,commercial & office complex, tourist resort as per IS: 15658-2006 (over 20-40 mmmedium sand bed on 250mm thk WBM/ WMM base course &250 mm thk bound gnaular /granular sub-base courseincluding cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.)Coloured Decorative |
| 9 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety |
| 10 | Supplying, fitting and fixing G.I. pipes of Jindal/Bansal/ Nezone make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials.)(A) For Exposed Work80 mm dia. medium quality |
| 11 | Supplying, fitting and fixing G.I. pipes of Jindal/Bansal/ Nezone make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials.)(A) For Exposed Work40 mm dia. medium qualityRef:-Analysed rate(3.6m x 4nos + 2.0m x 6nos.) x 23 nos = 607.20m |
| 12 | Supplying, fitting & fixing 1.5mm thick Plain CorrugationPolycarbonate clear sheet made of national brand, excluding the supporting frame work, fitted and fixed with 10mm dia x55mm Self-driving screws, EPDM washers and putty complete with 150mm end lap and one corrugation minimum side lap complete as per specification & direction of Engineer - in - charge including materials, labour, taxes and all other incidental charges.(Payment to be made on area of finished work ). |
| 13 | Providing and fixing exterior quality Aluminium Composite Panel (ACP)wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP)(a) 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating)Ref:-PWD(B) schl.2017, pg-250, Item-27(a)0.45m x 2.0m x 46 nos.= 41.4 sq.m. |
| 14 | Supplying, fitting, fixing in position netting with PVC CoatedCrinkle mesh of approved colour with wooden or steel or concrete frame work including cost of galvanised bolts, nuts, screws, nails, spacers, shape welding etc complete but excluding the cost of supporting frame works, battens etc(a) a) 25 mm. x 25 mm. x 8 g. |
| 15 | M.S.or W.I. Ornamental grill of approved design jointscontinuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing on or above 12 Kg./sq.mtr |
| 16 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 17 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary.On steel or other metal surface :With super gloss (hi-gloss) -(i) Two coats (with any shade except white) |
| 18 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making A) UPVC Pipes:(i) 75 mm. Dia. |
| 19 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal area. |
| 20 | Supplying, fitting and fixing glass reinforced polyestertranslucent fiber sheet 300mm wide in half round gutter inroof as per IS: 12866 - 1989 fitted and fixed with 50 X 6mmMS Clamp with necessary bolts and nuts, screws and jointingmaterial complete as per direction of Engineer - in - Charge.a) 1.6mm +/- 0.2 mm thick sheet.i) Fire retardant milky white |
| 21 | Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific directionof the Engineer-in-charge) |
| 22 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC.In Ground FloorOne Coat |
| 23 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat)a) Normal Acrylic Emulsion |
| 24 | Add GST@18% on Sl. No. 1 to 23 |
| 25 | Add labour cess @1% on Sl. No. 1 to 24 |