|
| 1 | (Rep-BGP) DTR 25 KVA11/0.4 KV BIS certified level-II |
| 2 | Labour Charge for installation (Rep-BGP) DTR 25 KVA11/0.4 KV BIS certified level-II |
| 3 | (Rep-BGP) DTR 63 KVA11/0.4 KV BIS certified level-II |
| 4 | Labour Charge for installation (Rep-BGP) DTR 63 KVA11/0.4 KV BIS certified level-II |
| 5 | BIMETALIC CLAMP DISTRIBUTION TRANSFORMERS BUSHING |
| 6 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 7 | Transformer Belting Set 50X50X6 MM Angle with Two cross fixing channel |
| 8 | 140KG 8 mtr long PCC Pole |
| 9 | Labour Charge for digging and erection of 140KG 8 mtr long PCC Pole |
| 10 | Labour Charge for digging and erection of 140KG 8 mtr long PCC Pole with transportation of PCC pole |
| 11 | PVC 2 Core un Armoured 2.5 SQMM Aluminium Conductor |
| 12 | Labour Charge for PVC 2 Core un Armoured 2.5 SQMM Aluminium Conductor |
| 13 | XLPE 1 core unarmoured 35 Sqmm aluminium conductor 1100 volts |
| 14 | Labour charge for XLPE 1 core unarmoured 35 Sqmm aluminium conductor 1100 volts |
| 15 | XLPE 1 core unarmoured 50 Sqmm aluminium conductor 1100 volts |
| 16 | Labour charge for XLPE 1 core unarmoured 50 Sqmm aluminium conductor 1100 volts |
| 17 | XLPE 1 core unarmoured 70 Sqmm aluminium conductor 1100 volts |
| 18 | Labour charge for XLPE 1 core unarmoured 70 Sqmm aluminium conductor 1100 volts |
| 19 | AAAC Rabbit conductor 0.05 sq.inch (55 sq.mm. Al.Eq.) (Conductor ACSR scrap) |
| 20 | Labour Charge for stringing AAAC Rabbit conductor 0.05 sq.inch (55 sq.mm. Al.Eq.) (Conductor ACSR scrap) |
| 21 | AAAC Raccoon conductor 0.075 sq. inch (80sq.mm. Al.Eq.) |
| 22 | Labour Charge for AAAC Raccoon conductor 0.075 sq. inch (80sq.mm. Al.Eq.) |
| 23 | 11 KV D.O. Fuse unit Polymer type |
| 24 | Labour Charge for fixing of 11 KV D.O. Fuse unit Polymer type |
| 25 | 9KV Gapless type (5KA) polymer for DTR Lightening Arrester |
| 26 | Labour charge for 9KV Gapless type (5KA) polymer for DTR Lightening Arrester |
| 27 | 11 KV Composit Polymer Disc insulator |
| 28 | 11 KV Strain Hardware (T&C type) fittings |
| 29 | 11 KV polymer Pin Insulator |
| 30 | ( Labour Charge)11 KV polymer Pin Insulator |
| 31 | 11 KV V Cross Arm 65x65x6 mm Angle type |
| 32 | Labour Charge for 11 KV V Cross Arm 65x65x6 mm Angle type |
| 33 | 11 KV top Clamp 65x65x6 mm Angle type |
| 34 | labour charge for 11 KV top Clamp 65x65x6 mm Angle type |
| 35 | D.C. Cross arms 4\" Center to center(100x50x6mm) channel |
| 36 | Labour Charge for fixing ofD.C. Cross arms 4\" Center to center(100x50x6mm) channel |
| 37 | Transformer mounting Channel (100x50x6 mm) |
| 38 | Labour Charge for fixing Transformer Mounting Channel (100x50x6 mm) |
| 39 | Three phase static energy meters 20-80 Amps with L.S. & amp TOD Facility with box |
| 40 | Labour charge for Three phase static energy meters 20-80 Amps with L.S. & amp TOD Facility with box |
| 41 | Single phase electronic meter with data downloading facility & amp box 5-30 Amps |
| 42 | Labour Charge for Single phase electronic meter with data downloading facility & amp box 5-30 Amps |
| 43 | Meter instalation Structure (50x50x6 mm angle Type) for Kaccha house |
| 44 | Labour Charge for Febrication & instalation of Meter Structure (50x50x6 mm angle Type) for Kaccha House |
| 45 | Concreting of (50x50x6 mm) angle meter structure for kaccha house (0.05 cmt per structure) |
| 46 | Labour Charge for Concreting of (50x50x6 mm) angle meter structure for kaccha house(0.05 cmt per structure) |
| 47 | Stay Insulator 90X65 |
| 48 | Anti Climbing devices (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 49 | Labour Charge for fixing of Anti Climbing devices (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 50 | D.O. Mounting Channel 75x40x6 mm |
| 51 | Labour Charge for fixing ofD.O. Mounting Channel 75x40x6 mm |
| 52 | Stay set complete without Stay wire 16 mm (Painted) |
| 53 | Labour Charge for fixing ofStay set complete with Stay wire 16 mm (Painted) |
| 54 | Stay wire 7/3.15 MM (7/10 SWG) |
| 55 | G.I. Wires 4.0 MM (8SWG) |
| 56 | G.I. Strip 25x3 mm1 |
| 57 | labour charge for G.I. Strip 25x3 mm1 |
| 58 | G.I. Pipe 40 mm Dia c Grade type |
| 59 | Labour charge for G.I. Pipe 40 mm Dia c Grade type |
| 60 | Bentonite compound powder |
| 61 | Clamp for 140 KG PCC pole MS Flat 50x6 mm MS Flat ( 65x8 mm) |
| 62 | Back Clamp for 140 KG Pcc Pole MS Flat ( 50x6 mm) |
| 63 | Stone Block/Per cast block for base pedding(450x450x75mm) |
| 64 | Back Filling of pole with boulders |
| 65 | Concreting of stay (16 mm/12 mm) @0.2 Cmt. Per stay |
| 66 | Labour Charge for Concreting of stay (16 mm/12 mm) @0.2 Cmt. Per stay |
| 67 | Concreting of structure & amp foundation (1:3:6) |
| 68 | Labour Charge for Concreting of structure & amp foundation (1:3:6) |
| 69 | LT Distribution box with isolator on incoming with HRC fuse for 63 KVA DTR (200 Amp Isolator & amp; 6 SP of 60 AMP.) |
| 70 | Labour Charge forLT Distribution box with isolator on incoming with HRC fuse for 63 KVA DTR (200 Amp Isolator & amp; 6 SP of 60 AMP.) |
| 71 | Red oxide paint |
| 72 | Labour Charge forRed oxide paint |
| 73 | Aluminium paint |
| 74 | Labour Charge for Aluminium paint |
| 75 | M.S.Nuts and Bolts |
| 76 | Galvanized nut & Bolt with washar |
| 77 | Danger Board Enamelled 11 KV |
| 78 | Labour Charge forDanger Board Enamelled 11 KV |
| 79 | Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr. Lead of 4.0 MM G.I. Wire |
| 80 | Earthing for PCC pole 4.00 mm-8 SWG G.I. wire 0.8 KG per pole |
| 81 | Aluminium binding wire and tape |
| 82 | jointing sleeves suitable for rabbit (55Sq.mm Al .Eq) AAAC conductor |
| 83 | Labour charge for Complete jumpering of DTR |
| 84 | Miscelleaneous Charges For New Service Connection |
| 85 | MCB OF 16 AMP |
| 86 | PVC/Rubber Bushes |
| 87 | 3 pin 5A socket ( Two no piano type switch bulb bakelite holder with wiring & amp E) |
| 88 | Switch Board |
| 89 | Wooden Board 10\"\"x8\"\" |
| 90 | Rack Bolt/Screw |
| 91 | LED Lamp with 9 watt (Complete) |
| 92 | A.B Cable hanging clamps/ tension clamps (Galvanized) as perenclosed Drawing |
| 93 | Labour Charge for fixing of A.B Cable hanging clamps/ tension clamps (Galvanized) as per enclosed Drawing |
| 94 | SUSPENSION CLAMP FOR LT AB CABLE |
| 95 | Labour Charge for fixing ofSUSPENSION CLAMP FOR LT AB CABLE |
| 96 | Clamps for neutral for AB Cable |
| 97 | labour charge of Clamps for neutral for AB Cable |
| 98 | PIERCING CONNECTOR TYPE-I, 1P/3P (MAIN 16-50SQMM TAPOFF16-50SQMM |
| 99 | Labour Charge for PIERCING CONNECTOR TYPE-I, 1P/3P (MAIN 16-50SQMM TAPOFF16-50SQMM |
| 100 | PIERCING CONNECTOR TYPE-II (MAIN 16-50 SQMM TAP-OFF 16-50 SQMM) |
| 101 | Labour Charge for PIERCING CONNECTOR TYPE-II (MAIN 16-50 SQMM TAP-OFF 16-50 SQMM) |
| 102 | single Ph serv conn box (Deep drwan metal service connection Boxes) with one incmng upto 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector |
| 103 | Labour Charge for installation single Ph serv conn box (Deep drwan metal service connection Boxes) with one incmng upto 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector |
| 104 | SGST @ 9% |
| 105 | CGST @ 9% |
