Bids Are Invited For Procurement Of Raw Materials -1 BAR ROUND,STAINLESS STEEL,17-4PH,SOLUTION HEAT TREATED, CENTRAL GROUND AMS 5643R, SIZE DIA 15.9 X 500MM, 2 AUSTENITIC TYPE FREE MACHINING NON-MAGNETIC BRIGHT QUALITY STAINLESS STEEL HEXAGONAL CONF.TO HAL STD 1206,AISI-303-GR18/10,A/F 3.0 MMX2 TO 3 MTRS LENGTH 3 AUSTENITIC STAINLESS STEEL SHEET, CONDITION +AT (SOLUTION ANNEALED), SPECIFICATION Z10CNF17-08 (OR) X8CRNIS18-09, AS PER EN 10088-2, TENSILE STRENGTH 500-750 MPA, SIZE 0.4 MM X 500 X 500 MM PVC COATING SHOULD BE ABOVE 50 MICRONS ON BOTH SIDES. 4 AUSTENITIC STAINLESS STEEL ROD, CONDITION +AT (SOLUTION ANNEALED), SPECIFICATION Z10CNF18-09 (OR) X8CRNIS18-09 AS PER EN 10088-3, , TENSILE STRENGTH 500-750 MPA, SIZE DIA 6 MM X 1 TO 2 METERS IN LENGTH. 5 AUSTENITIC STAINLESS STEEL ROD, CONDITION +AT (SOLUTION ANNEALED), SPECIFICATION Z10CNF18-09 (OR) X8CRNIS18-09 AS PER EN 10088-3, TENSILE STRENGTH 500-750 MPA ,SIZE DIA 10 MM X 1 TO 2 METERS IN LENGTH. 6 AUSTENITIC STAINLESS STEEL ROD, CONDITION +AT (SOLUTION ANNEALED) SPECIFICATION Z10CNF18-09 (OR) X8CRNIS18-09 AS PER EN 10088-3, TENSILE STRENGTH 500-750 MPA ,SIZE DIA 14 MM X 1 TO 2 METERS IN LENGTH.. 7 LEADED BRASS ROD, CONDITION ANNEALED, SPECIFICATION CUZN39PB2 AS PER NF EN 12164, SIZE DIA 3 MM X 1 TO2 MTRS IN LENGTH. 8 AL.ALLOY SHEET THICKNESS 2 MM, TEMPER T6, SPEC (6061,QQ-A-250/11)/(ENAW6061,EN573-3 /EN 485-2)/(IS GRADE -65032(HS20),IS737)/(6061-BSH20,EN 573-3/EN 485-2)/(AMS4027)/(6061,ASTMB209)/( DIN ALMG1SICU 3.3211,EN573-3/EN 485-2) /(UNI9006/2,EN573-3/EN 485-2) SIZE 2 X 1000 X 1000 MM WITH PVC COATING ON BOTH SIDES 9 AL.ALLOY SHEET 6061-T6- THICKNESS0.062INCH X48INCH X144INCH . 10 ALUMINIUM ALLOY SHEET, CONDITION H111/O,SPECIFICATION EN AW-5083 OR AG4.5 OR ALMG4.5MN AS PER BS EN 573-3 & BS EN 485-2, SIZE THICKNESS 2.0 MM X1250 X 2500 MM WITH PVC COATING OF THICKNESS 50 MICRONS & ABOVE ON BOTH SIDES. 11 NAVAL BRASS RODS, CONDITION ANNEALED, CONFORMING TO IS 291 1989, GRADE 1, / HAL STD 1302 / BS 2824 GR CZ-112, SIZE DIA 4MM X 2 TO 3 METERS IN LENGTH 12 ALCLAD AL.ALLOY SHEETS, SPEC. 2014/2014 A-T6 /WP, CLADDING 1050 A /1070/19500/19700/6003 ON BOTH SIDES AS PER BS L165/BS L167 / EN 4400-2/EN 2087/GR 24345-WP AL.CLAD, IS 3436/AL.CLAD 2014,ASTM B209/AMS 4029 CLAD/HAL STD 1250, TH.THICKNESS2.0 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. IT SHOULD BE PROTECTED WITH TRANSPARENT PVC COATING MORETHAN 50MICRO ON BOTH SIDES. 13 ALCLAD AL.ALLOY SHEETS, SPEC. 2014/2014 A-T6 /WP, CLADDING 1050 A /1070/19500/19700/6003 ON BOTH SIDES AS PER BS L165/BS L167 / EN 4400-2/EN 2087/GR 24345-WP AL.CLAD, IS 3436/AL.CLAD 2014,ASTM B209/AMS 4029 CLAD/HAL STD 1250, TH.THICKNESS1.5 MM, MIN. SIZE 900 X 2400 MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. IT SHOULD BE PROTECTED WITH TRANSPARENT PVC COATING MORETHAN 50MICRO ON BOTH SIDES. 14 AUSTENITIC TYPE FREE MACHINING NON-MAGNETIC BRIGHT QUALITY STAINLESS STEEL ROUND CONF.TO HAL STD 1206,AISI-303-GR18/10,DIA 20MMX2 TO 3 MTRS LENGTH 15 MILD STEEL COLD DRAWN ROUND CONFORMING TO HAL STD 1001, IS 1570 PART II , GRADE C 20 / EN 3 B , BS 970 / BS 070 M 20, BS 970 SIZE DIA 8 MM X 2 TO 3 METERS IN LENGTH. 16 MILD STEEL COLD ROLLED STRIPS OF THICKNESS5.0 X 1000 X 1000MM OF HAL STD 1008/IS 513/GOST 914 17 ALCLAD AL.ALLOY SHEETS, SPEC. 2014/2014 A-T6 /WP, CLADDING 1050 A /1070/19500/19700/6003 ON BOTH SIDES AS PER BS L165/BS L167 / EN 4400-2/EN 2087/GR 24345-WP AL.CLAD, IS 3436/AL.CLAD 2014,ASTM B209/AMS 4029 CLAD/HAL STD 1250, TH.THICKNESS1.0 MM, MIN. SIZE 1000X2000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. IT SHOULD BE PROTECTED WITH TRANSPARENT PVC COATING MORETHAN 50MICRO ON BOTH SIDES. 18 M.S ROUND CONFORMING TO, HAL STD 1002 IS 1570-GR.13S25,BS 970 GR.EN1A,DIA 5MM X 2-3 MTRS. 19 HALF FINISHED BRASS MATERIAL TUBE DIA 4 X 0.5 OF 1000MM HAL STD 1307/IS407-81 GRADE CUZN37 20 AUSTENETIC TYPE-NON MAGNETIC BRIGHT STAINLESS STEEL SHEETS IN COLD ROLLED,ANNEALED,PICKLED CONDITION CON.TO US FEDERAL SPEC.QQ-S-766C, AISI 304-CHROMIUM-18PERCENTAGE , NICKLE-8PERCENTAGE , HALSTD 1210, WITH PVC COATING ON BOTHSIDE,THICKNESS0.3MM X 1000 X 1000MM 21 ALUMINIUM ALLOY SHEET, CONDITION T6, SPECIFICATION ENAW 6061, EN 485-2, SIZE THICKNESS 2.5 MM X 1000 X 1000 MM. PACKING PVC COATING OF 50 MICRONS THICKNESS / ANY EQUIVALENT PROTECTIVE COATING ON BOTH SIDES OF SHEET TO PREVENT SCRATCHES. 22 ALUMINIUM ALLOY SHEET 6061,T651/T6, SIZE - THICKNESS3X1000X2000MM, AMS-QQ-A-250/11A(CANC) / BS EN 485 -2 2008, PACKING PVC COATING OF 50 MICRONS THICKNESS / ANY EQUIVALENT PROTECTIVE COATING ON BOTH SIDES OF SHEET TO PREVENT SCRATCHES. 23 MATERIAL ALUMINIUM ALLOY SHEET, SPECIFICATION EN 485-2, GRADE ENAW6061, CONDITION T6/T651 (OR) SPECIFICATION IS 736, GRADE 65032, CONDITION WP (OR) AMS 4027 SIZE THICKNESS 2MM X 1250 X2500MM WITH PVC COATING OF THICKNESS 50 MICRONS & ABOVE ON BOTH SIDES. 24 STAINLESS STEEL ROUND, SPECIFICATION SS 303 PER QQ-S-764 , SIZE DIA 8 MM X 1 TO 2 METERS IN LENGTH. 25 ETP COPPER SHEET 99.9PERCENTAGE , CONDITION 1/2 H, CONFORMING TO HAL STD 1310, IS 191-80 (GR.ETP) PART V, 1972-77-1/2H, BS 2870 C 101, SIZE THICKNESS 1.6 MM X 350 X 1200 MM WITH PVC COATING ON BOTH SIDES. 26 ALUMINIUM ALLOY SHEET, SPECIFICATION 5251, CONDITION H6 OF THICKNESS THICKNESS 0.9MM MIN LENGTH AND WIDTH IS 500 X500MM PACKING PVC COATING OF 50 MICRONS THICKNESS / ANY EQUIVALENT PROTECTIVE COATING ON BOTH SIDES OF SHEET TO PREVENT SCRATCHES. 27 ALUMINIUM ALLOY PLATE, CONDITION T651, SPECIFICATION 6061-T651 PER QQ-A-250/11, SIZE THICKNESS 18 MM X1000 X 1000 MM. 28 AL.ALLOY PLATE, CONDITION T851, GRADE AU2GN / 2618, SPECIFICATION AMS 4132 / AIR 9051 / EN 485-2 / EN 573-3. SIZE THICKNESS 8 X 1000 X 1000 MM 29 MATERIAL ALUMINIUM ALLOY PLATE, CONDITION T351, SPECIFICATION 2024, TENSILE STRENGTH RM MINIEQUAL TO TL 430 N/SQ. MM AS PER EN 4400-1,SIZE THICKNESS 14MM X 1000 X 1000MM. 30 ALUMINIUM ALLOY ROUND, SPEC AA2014-T652 , SIZE DIA 70 MM X 1000 MM 31 ALUMINIUM ALLOY PLATE, CONDITION H111/O, SPECIFICATION EN AW-5083 OR AG4.5 (OR) ALMG4.5MN AS PER BS EN 573-3 & BS EN 485-2, SIZE THICKNESS22 X 1000 X 1000 MM. Total Quantity : 1784
