|
| 1 | BOQ Part -I Under NH Division PWD Agra (Bill No. 1 : Road Maintenance) |
| 2 | Earthwork in cutting or in embankment in ordinary soil, excavation to be in the from of regular pits not exceeding 1/2 metre (20\") in depth & earthwork in emvankment to be in 20cm (8\") layers, including ramming & dressing the surface to required levels and slopes and also including 1.5 metre (5th) lifts and 30m (100\") lead. The earth form cutting to be used in making embankment or to be deposited as spoil banks with 30 metres (100ft) as directed by the Engineer-in-charge, as per MoRTH specification. including all taxes, royalty, cess etc. but excluding GST. |
| 3 | Removal of rank vegetation/weeds and undesirable vegetation from shoulders, embankment slopes upto ROW (both sides) complete in all respects including breaking of clods, rough dressing and disposal of waste material and vegetation at a place outside ROW as per direction of Engineer- In-Charge and as per Maintenance Standards Clause 3.3 (Frequencywill be once in a quarter), as per MoRTH specification 201. including all taxes, royalty, cess etc. but excluding GST. |
| 4 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MORTH specification clause No. 406 complete in all respacts as per direction of Engineer- In-Charge. including all taxes, royalty, cess etc. but excluding GST. |
| 5 | Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per MORTH specification clause No. 502 complete in all respacts as per direction of Engineer- In-Charge. including all taxes, royalty, cess etc. but excluding GST. |
| 6 | Providing and applying tack coat with bitumen VG-10 usingbitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per MORTH specification clause No. 503 complete in all respacts as per direction of Engineer- In-Charge. including all taxes, royalty, cess etc. but excluding GST. |
| 7 | Tack coat @ 25Kg (over DBM) |
| 8 | Tack coat @ 20Kg (over prime coat) |
| 9 | Providing and laying dense graded bituminous macadam grading 2 with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per centby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respacts as per direction of Engineer- In-Charge. including all taxes, royalty, cess etc. but excluding GST. |
| 10 | Providing and laying bituminous concrete withhigher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respacts as per direction of Engineer- In-Charge. including all taxes, royalty, cess etc. but excluding GST. |
| 11 | BILL NO.2: Pavement Repairs |
| 12 | Providing treatment and repair of pot holes/ruts and any depth/ patchrepair of all types of bitumen pavement complete by using paving grade bitumen/emulsion/cold ready mix material. The job includes removal of all failed material, trimming of completed excavation to providing firm vertical faces,cleaningof surface, painting of tack coat on the sidesand base of excavation as per Clause no. 503 back filling the patch with bituminous materialas per MoRTH specification 509. Compacting trimming and finishing the surface to forma smoothcontinuous surfaceallas per MoRTH Ispecification 3004.2 and as per direction of Engineer- In-Charge. Pot hole Size 1M X 1M for 12 Months) including all taxes, royalty, cess etc. but excluding GST. |
