Quotations For Civil Work From The Different Vendors For Haringhata Campus Of The University -, Kolkata-West Bengal

Quotations For Civil Work From The Different Vendors For Haringhata Campus Of The University -Civil Work-Staircase of Boy canteen -Additional Staircase to access solar plant at rooftop of Boys Canteen at MAKAUT, Haringhata Campus Details BoQ attached page 2 -1 Item-40/Page-43 PWD SCH.-2017 10th Corrigendum Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel II. Other than SAIL/ TATA/RINL 2 Item-10/Page-26 PWD SCH.-2017 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety 3 Item-36/Page-42 PWD SCH.-2017 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge 6 Item-22/Page-34 PWD SCH.-2017 I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (A) [Pakur Variety] (b) 1:4:8 proportion 4 Item-2/Page-1 PWD SCH.-2017 Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1500 mm. %Cum 5 Item-3/Page-1 PWD SCH.-2017 Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation. 6 Item-1/Page-100 PWD SCH.-2017 M.S. structural works in columns, beams etc. with simple rolledstructural members (e.g. joists, angle, channel sections conformingto IS: 226, IS: 808 & SP (6)- 1964 connected to one another withbracket, gussets, cleats as per design, direction of Engineerinchargecomplete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming toIS: 816- 1969 & IS: 1995 using electrodes of approved make andbrand conforming to IS:814- 2004, haulage, hoisting and erectionall complete. The rate includes the cost of rolled steel section,consumables such as electrodes, gas and hire charge of all tools andplants and labour required for the work including all incidentalchages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 Kg./m 1)Gratings 20nos @ 4.34kg 2) NB 80DIA 5.1Mtr. X 8.47kg/mtr 3) NB 65DIA 3.4Mtr. X 6.61kg/mtr 4) ISA 65x65x6 @ 5.8kg/mtr. 5)NB 40DIA (6.5+4.5)mtr.@ 4.11kg/mtr. 6)NB 40DIA .85mtr.@ 4.11kg/mtr.x10nos 7)NB 32DIA 1.5mtr.@ 2.6kg/mtr.x1nos 8) ISA 35X35X5-2.57KG/MTR.-1.8MTR 9)Landing Gratings a) MS FLAT 25X3mm -.8mtrX 17nos @ .589kg/mtr. b) ISA 35X35X5-2.57KG/MTR.-3.2MTR 7 Item-1/Page-200 PWD SCH.-2017 (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 8 Item-2/Page-201 PWD SCH.-2017 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) On steel or other metal surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white) 9 Item-3/Page-10 PWD SCH.-2017 Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof.

Refer document

Refer document

INR 33630.0 /-