|
| 1 | General Tool and Equipment in various Trades |
| 2 | Foot Rule/ Steel Tape - 2 Feet 4 Fold /6m |
| 3 | Steel- Measuring Scale - 12 Inch |
| 4 | Marking Knife - 200mm length |
| 5 | Try Square - 200mm (good quality) |
| 6 | Bevel Square - 50 mm |
| 7 | Hand Saw - 450 mm (heavy duty) |
| 8 | Tenon Saw - 300 mm |
| 9 | Metal jack plane - 335mmX50mm Cutter |
| 10 | Metal smoothing plane - 200mmX50mm Cuter |
| 11 | Firmer Chisel Bevel Edge- 6mm width (with handle) |
| 12 | Firmer Chisel Bevel Edge- 10mm width (with handle) |
| 13 | Firmer Chisel Bevel Edge- 15mm width (with handle) |
| 14 | Firmer Chisel Bevel Edge- 20mm width(with handle) |
| 15 | Firmer Chisel Bevel Edge- 25mm width (with handle) |
| 16 | Mortise Chisel -6mm width (with handle) |
| 17 | Mortise Chisel-10mm width (with handle) |
| 18 | Mortise Chisel - 15mm width (with handle) |
| 19 | Screw Driver - 300 mm (heavy duty) |
| 20 | Mallet - Medium Size |
| 21 | Claw hammer - 500 gms(heavy duty) |
| 22 | Oil Stone - carborundum universal-silicon carbide combinationrough and fine |
| 23 | Measuring tape - 3 meter |
| 24 | Spring caliper (inside) - 150 mm |
| 25 | Spring caliper (out side) - 150mm |
| 26 | Trammel - 300mm |
| 27 | Rip saw - 600 mm |
| 28 | Cross cut saw - 250 mm |
| 29 | Key hole saw - 250mm |
| 30 | Fret saw frame - 150 mm |
| 31 | Compass Saw -350 mm |
| 32 | Gauge Chisel,Firmer - 6mm width (with handle) |
| 33 | Gauge Chisel,Firmer - 10mm width (with handle) |
| 34 | Gauge Chisel,Firmer - 12mm width (with handle) |
| 35 | Gauge Chisel,Firmer - 16mm width (with handle) |
| 36 | Gauge Chisel,Firmer - 20mm width (with handle) |
| 37 | Gauge Chisel,Scribing - 6mm width (with handle) |
| 38 | Gauge Chisel,Scribing - 10mm width (with handle) |
| 39 | Gauge Chisel,Scribing - 12mm width (with handle) |
| 40 | Gauge Chisel,Scribing - 16mm width (with handle) |
| 41 | Gauge Chisel,Scribing - 20mm width (with handle) |
| 42 | Ball pein hammer - 600 g(heavy duty) |
| 43 | Cross pein hammer -600 g(heavy duty) |
| 44 | Screw driver- 450 mm (heavy duty) |
| 45 | Screw Driver - 250 mm(heavy duty) |
| 46 | Screw driver - 150 mm(heavy duty) |
| 47 | Pincer -50 mm |
| 48 | File half round -2nd cut 250 mm (with handle) |
| 49 | File half round - Woode rasp bastard 300 mm (with handle) |
| 50 | File slim taper - 100 mm (with handle) |
| 51 | File slim taper - 150 mm (with handle) |
| 52 | Card file (steel) wire brush for file - 200 mm |
| 53 | Hand Drill - 6 mm capacities |
| 54 | Country drill with bow (ball bearing -620 x 726 mm |
| 55 | Ratchet brace - 250 mm Sweep |
| 56 | Hand auger - 10,12,14,16,18,20,22.25 mm |
| 57 | Centre bits - 6,8,10,12 |
| 58 | Expansion bit set - 218 x171 mm |
| 59 | Twist drill bits - 6,8,10,12 mm |
| 60 | Counter sink bit rose type - 12 mm |
| 61 | Breast drill - 6 mm capacity |
| 62 | Centre punch - 5mm |
| 63 | Snip straight - 200 mm (heavy duty) |
| 64 | Oil cans - 225 x 225 mm |
| 65 | Compbination side cutting pliers - 250 x 250 mm (heavy duty) |
| 66 | Plunger saw set/pistil grip type - 300 x 300 mm |
| 67 | Number punch - 12 mm |
| 68 | Slip stone - 100 mm |
| 69 | Round crow bar - with chisel and claw end 1070x25 mm |
| 70 | G clamp - 100mm |
| 71 | G clamp -150mm |
| 72 | T bar cramp - 0.6 meter (heavy duty) |
| 73 | T bar cramp -1.25 meter (heavy duty) |
| 74 | Carpenter vice 250 mm jaws (Professional) heavy duty |
| 75 | saw sharpening vice heavyduty |
| 76 | Carvinng tools set |
| 77 | Goggles pair |
| 78 | Glass cuter |
| 79 | Nail punch |
| 80 | Surface plate - 600 x 600 mm |
| 81 | Blower - electric type |
| 82 | Grease gun |
| 83 | Spanner double ended - set of 14 (heavy duty ) |
| 84 | Bench grinder - 200 mmD.E pedestal(heavy duty ) |
| 85 | drilling machine - 12 mm capacities pedestel type(heavy duty ) |
| 86 | Portable electrical drill - 6mm capacity |
| 87 | Drill chuck - 12 mm capacities |
| 88 | Electric heater |
| 89 | Connecting screwdriver10 X 100 mm |
| 90 | Neon tester 500V |
| 91 | Screw driver setSet of 7 |
| 92 | Insulated side cutting pliers 150mm |
| 93 | Long nose pliers 150mm |
| 94 | Soldering iron 25 Watt, 240 Volt |
| 95 | Electrician knife 100 mm |
| 96 | Tweezers 150 mm |
| 97 | Digital M ultimeter (3 3/4 digit) ,4000 Counts |
| 98 | Soldering Iron Changeable bits 15 Watt, 240 Volt |
| 99 | De soldering pump electrical heated,manual operators 230V, 40W |
| 100 | Steel rule graduated both in Metric and English Unit 300 mm, |
| 101 | Precision set of screw drivers T5, T6, T7 |
| 102 | Tweezers – Bend tip |
| 103 | Steel measuring tape 3 meter |
| 104 | Tools makers vice 100mm (clamp) |
| 105 | Tools maker vice50mm (clamp) |
| 106 | Crimping tool (pliers) 7 in 1 |
| 107 | File flat bastard -200 mm |
| 108 | File flat second cut -200 mm |
| 109 | File flat smooth -200 mm |
| 110 | Plier - Flat Nose - 150 mm |
| 111 | Round Nose pliers - 100 mm |
| 112 | Scriber straight - 150 mm |
| 113 | Allen key set (Hexagonal -set of 9) - 1-12 mm,Set of 24 keys |
| 114 | Magnifying lenses - 75 mm |
| 115 | Continuity tester |
| 116 | Hacksaw frame adjustable -300 mm |
| 117 | Chisel - Cold - Flat -10 mm X 150 mm |
| 118 | Scissors - 200mm |
| 119 | Handsaw 450mm -Hand Saw - 450 mm |
| 120 | Hand Drill Machine Electric with Hammer Action - 13 mm |
| 121 | Bench Vice - Bench Vice - 125 mm |
| 122 | Rule steel (24\"(600 mm.) |
| 123 | Scriber |
| 124 | Hand saw (450 mm) |
| 125 | Hack Saw with Frame |
| 126 | Smoothing Plane |
| 127 | Jack Plane |
| 128 | Mallet Round |
| 129 | Carpenter Hammer (Ball Pin) |
| 130 | Hammer (Crass Pin) |
| 131 | Hammer (Claw) |
| 132 | Portable Electric Hand Drill Machine |
| 133 | Drill Bits (Consumable) 3 mm |
| 134 | Drill Bits (Consumable)5mm |
| 135 | Drill Bits (Consumable)8mm |
| 136 | Drill Bits (Consumable)10mm |
| 137 | Drill Bits (Consumable) 12mm |
| 138 | Chisel Knife 5mm |
| 139 | Chisel Knife8mm |
| 140 | Chisel Knife10mm |
| 141 | Chisel Knife20mm |
| 142 | Chisel Knife30mm |
| 143 | Hacking Knife |
| 144 | Palate Knife Set |
| 145 | Diamond Glazier Knife |
| 146 | Paint Tin Opener |
| 147 | Scraper Knife |
| 148 | Shave Huck Knife |
| 149 | Glider Knife |
| 150 | Pliers Insulated |
| 151 | Blow Lamp |
| 152 | Screw Driver 100mm |
| 153 | Screw Driver 200mm |
| 154 | Portable Electric Hand Grinder |
| 155 | Face Mask & Respirator (Consumable) |
| 156 | Gloves (Rubber) (Consumable) |
| 157 | Pipe vice |
| 158 | Hacksaw |
| 159 | Pipe wranch (10\"\") |
| 160 | Pipe wranch (16\") |
| 161 | flat file-smooth finish (12\" ) |
| 162 | circuler cut file (12\" ) |
| 163 | raft cut (12\" ) |
| 164 | Pipe dai set metric & Inches (Fine pitch) |
| 165 | Digital Weight Machine (Capacity 5 kg. weighing scale) |
| 166 | Rule Steel - 300 mm both in inch and mm |
| 167 | Hacksaw Frame adjustable -250 to 300 mm |
| 168 | Scriber -200 mm |
| 169 | Centre punch -100 mm |
| 170 | Chisel Cold, flat -20 mm |
| 171 | Hammer ball pein-800 grams |
| 172 | File flat rough-300 mm |
| 173 | Level spirit wooden-300 mm |
| 174 | Plumb bob-50 grams |
| 175 | Trowel-C-125-I S: 6013 |
| 176 | Stillson wrench-200mm |
| 177 | Stillson wrench- 350 mm |
| 178 | Screw Driver-250 mm |
| 179 | Cutting pliers 200mm-IS:3650 |
| 180 | Steel tape-5 m |
| 181 | Hand Vice, Jaw-50 mm |
| 182 | File Flat, Smooth-200 mm |
| 183 | File Half Round, Rough-300 mm |
| 184 | File, Square, rough-250 mm |
| 185 | File, Square, Smooth-200 mm |
| 186 | File Triangular Rough-250 mm |
| 187 | File Flat Rasp-250 mm |
| 188 | File Triangular Smooth-200 mm |
| 189 | Chisel Cold Flat-20 mmX300mm |
| 190 | Chisel Cross Cut-6X150 mm I S-402 |
| 191 | Chisel Round Nose-3X150 mm I S -402 |
| 192 | Chisel Diamond Point-6X150mm |
| 193 | Punch , Letter set |
| 194 | Punch , Number set |
| 195 | Spanner monkey -up to 50mm |
| 196 | Cutter ,Pipe, wheel type-6mm to 25mm |
| 197 | Oil stone-150X50X25mm |
| 198 | Soldering Iron - Copper Bit , Fire heated ,Hatched , Straight500 grams |
| 199 | Try square 200mm |
| 200 | Inside Caliper 150mm |
| 201 | Caliper outside 150mm |
| 202 | Soil pot with brush |
| 203 | D. E. Spanners 7X8, 10X11, 13X17, 19X22, 24X27 IS:2028 |
| 204 | Pipe stock and dies complete with stocks,bushing,bushing holders. |
| 205 | Pipe stock and dies complete with stocks,bushing,bushing holders,taps and wrencheswith stocks,wrenchessizes covered, to suit pipes |
| 206 | Taps and wrenches sizes covered to suit pipes |
| 207 | Pipe vice to grip up to 77 mm IS -2587 |
| 208 | Stillson pattern pipe wrenches 450 mm to take pipe up to 52mm dia IS -4003 |
| 209 | Stillson pattern pipe wrenches 300mm to take pipe 20 mm to 32 mm |
| 210 | Chain :pipe wrench 90mm -650 IS 4123 |
| 211 | Adjustable, spanner, A-375, IS- 6149 A 375,IS6149 |
| 212 | Pipe bender, manually operated |
| 213 | Leg vice, 75mm jaw on Stand IS -2588 |
| 214 | Hand drill 6mm capacity with drill chuck(Electric) |
| 215 | Drill Twist (straight shank ) 3mm to 6mm |
| 216 | Bench vice125 mm jaws |
| 217 | Water Heater 10 litres |
| 218 | Hammering drilling machine |
| 219 | Electric PPR welding machine |
| 220 | Electric pump, 1 HP |
| 221 | Hydraulic pressure machine fortesting leakage in GI pipe fittings etc. |
| 222 | Rachet pipe die 15 mm to 32 mm |
| 223 | Double face hammers Double face hammers (weight 900 gms )IS 841-1983 |
| 224 | a) Pickaxe |
| 225 | b) Spade |
| 226 | c) Dormat |
| 227 | d) Girmale |
| 228 | Pipe bender(Hydraulic type) |
| 229 | Solar water heater system |
| 230 | CPVC/UPVC Pipe cutter Up to 50mm |
| 231 | Chase cutter (Electric) Blade dia 7 cm to 15 cm |
| 232 | Welding helmet fiber |
| 233 | Welding hand shield fibre |
| 234 | Chipping hammer with metal handle 250 grms |
| 235 | Chisel cold flat 19 mm X 150 mm |
| 236 | Center punch9 mmX 127 mm |
| 237 | Divider 200 mm |
| 238 | Stainless steel rule 300 mm |
| 239 | Scriber 150 mm double point |
| 240 | Flat tongs350 mm long |
| 241 | Hack saw framefixed 300 mm |
| 242 | File half roundbastard 300 mm |
| 243 | File flat 350 mm bastard |
| 244 | Hammer ball pane1 Kg with handle |
| 245 | Tip cleaner |
| 246 | Try sqare6 \"\" |
| 247 | Spindle key |
| 248 | Screw driver 300 mm blade |
| 249 | Number punch6 mm |
| 250 | Letter punch 6 mm |
| 251 | Magnifying glass100 mm dia |
| 252 | Universal weld measuring gauage |
| 253 | Spanner D.E 6mm to 32 mm |
| 254 | C clamp 10 cm |
| 255 | Hammer sledge double phased 4 kg |
| 256 | SS Tape 5 meters flexible in case |
| 257 | Pedestral grinder fitted with coarse and medium grain size grinding wheels 300 mm dia |
| 258 | Bench grinder fitted with fine grain size silicon carbide green grinding wheel 150 mm dia |
| 259 | AG 4 Grinder |
| 260 | Power saw machine 14\" |
| 261 | Anvil 12 sq. inches working area with stand |
| 262 | Swage block |
| 263 | Magnetic particle testing kit |
| 264 | Portable abrasive cut-off machine |
| 265 | Cotton Hand Gloves8\" |
| 266 | S.S Wire brush 5 rows |
| 267 | S.S Wire brush3rows |
| 268 | Rubber hose clip 0.5\" |
| 269 | Arc welding single coloured glasses 108 mm X 82 mm X 3 mm. DIN 11 A & 12 A |
| 270 | Arc welding plain glass 108 mm X 82 3 mm |
| 271 | Gas welding Goggles with colour glass 3 or 4A DIN |
| 272 | Safety goggles plain |
| 273 | Spark lighter |
| 274 | AG 4 Grinding wheels |
| 275 | Measuring Steel Tape 5 meter |
| 276 | Combination Plier Insulated 200 mm |
| 277 | Screw Driver Insulated 4mm×150 mm, Diamond Head |
| 278 | Screw Driver Insulated 6mm X 150 mm |
| 279 | Electrician screw driver thin stem insulated handle 4mm X 100 mm |
| 280 | Heavy Duty Screw Driver insulated 5mm X 200 mm |
| 281 | Electrician Screw Driver thin stem insulated handle 4mm X 250 mm |
| 282 | Punch Centre 9mm X 150 mm |
| 283 | Knife Double Bladed Electrician 100 mm |
| 284 | Neon Tester 500V |
| 285 | Steel Rule Graduated both in Metric and English Unit300 mm with precision of 1/4th mm |
| 286 | Hammer, cross peen with handle 250 grams |
| 287 | Hammer, ball peen With handle 500 grams |
| 288 | Pincer 150 mm |
| 289 | C- Clamp 200 mm |
| 290 | C- Clamp 100 mm |
| 291 | Spanner Adjustable drop forged, SS 150 mm |
| 292 | Spanner Adjustable drop forged,SS 300mm |
| 293 | Blow lamp brass 0.5 ltr |
| 294 | Chisel Cold 25 mm X 200 mm |
| 295 | Chisel firmer with wooden Handle 6 mm X 200 mm |
| 296 | Allen Key alloy steel 1.5-10 mm (set of 9) |
| 297 | Grease Gun 0.5 ltr. Capacity |
| 298 | Bradawl |
| 299 | Pully Puller with 3 legs 150 mm |
| 300 | Pully Puller with 3 legs300mm |
| 301 | Bearing Puller (inside) 200 mm |
| 302 | Bearing Puller (outside) 200 mm |
| 303 | Pipe vice Cast Iron with hardened jaw open type100 mm |
| 304 | Scissors blade, SS- 200mm |
| 305 | Scissors blade, SS 150 mm |
| 306 | Crimping tool- 1.5 sq mm to 16 sq mm |
| 307 | Crimping tool-16 sq mm to 95 sq mm |
| 308 | Wire Cutter and Stripper150 mm |
| 309 | Mallet hard wood 0.50 kg |
| 310 | Hammer Extractor type 250 grams |
| 311 | Hacksaw frame -Adjustable 300 mm |
| 312 | Hacksaw frame - Fixed 150 mm |
| 313 | Try Square 150 mm blade |
| 314 | Outside Caliper 150 mm spring type |
| 315 | Inside Caliper 150 mm spring type |
| 316 | Divider 150 mm spring type |
| 317 | Pliers long nose insulated 150 mm |
| 318 | Pliers flat nose insulated 200 mm |
| 319 | Pliers round nose insulated 100 mm |
| 320 | Tweezers 150 mm |
| 321 | Snip Straightheavy duty 250 mm |
| 322 | SnipBent heavy duty 250 mm |
| 323 | D.E.metric Spanner Double Ended6-32 mm |
| 324 | Drill hand brace 0-100mm |
| 325 | Drill S.S. Twist block 2 mm, 5 mm and 6 mm set of 3 |
| 326 | Plane cutters 50 mm X 200mm |
| 327 | Smoothing cutters 50 mm X 200mm |
| 328 | Gauge, wire imperial stainless steel marked in SWG & mm -wire gauge metric |
| 329 | File flat 200 mm 2nd cut with handle |
| 330 | File half round 200 mm 2nd cut with handle |
| 331 | File round 200 mm 2nd cut with handle |
| 332 | File flat rough 150 mm with handle |
| 333 | File flat bastard 250 mm with handle |
| 334 | File flat smooth 250 mm with handle |
| 335 | File Rasp, half round 200 mm bastard with handle |
| 336 | copper bit soldering iron 0.25Kg |
| 337 | De soldering Gun Heat proof nozzle, PVC type, 250mm |
| 338 | Hand Vice 50 mm jaw |
| 339 | Table Vice 100 mm jaw |
| 340 | Oil Can 250 ml |
| 341 | Hand Drill Machine 0-6 mm capacity |
| 342 | Portable Electric Drill Machine0-12 mm capacity 750W, 240V with chuck and key |
| 343 | Out Side Micrometer 0 - 25 mm least count 0.01mm |
| 344 | Rubber mat 2\"×4\"×1\" |
| 345 | Electrician Helmet (Yellow color) |
| 346 | Soldering iron 25 Watt- 230Volt |
| 347 | Soldering iron 65 Watt- 230Volt |
| 348 | Soldering iron 120 Watt- 230Volt |
| 349 | Temperature controlled soldering Iron 50Watt, 230Volt |
| 350 | Hammer ball peen 0.75 Kg. |
| 351 | Chisel Cold Flat 19 mm. |
| 352 | Centre Punch 10 mm. Dia x 100 mm. |
| 353 | Steel Rule 15 cm Engish and Metric |
| 354 | Screw Driver, 30 cm x 9 mm Blade |
| 355 | Screw Driver, 20 cm x 9 mm Blade |
| 356 | Spanner DE set of 12 pieces 6 mm-32mm |
| 357 | Plier combination 15 cm |
| 358 | Hand File 20 cm second cut |
| 359 | Feeler gauge 20blades (Metric) |
| 360 | Ring Spanner set of 12 pieces |
| 361 | steel tool box with lock and key (folding type) size 400 x 200 x 150 mm. |
| 362 | Allen key set of 12 pieces 2 mm.-14 mm |
| 363 | Circlip plier External 150 mm |
| 364 | Circlip plier External 200 mm |
| 365 | Circlip plier Internal 150 mm |
| 366 | Circlip plier Internal 200 mm |
| 367 | Socket spanner (1 st of 12 nos) 6mm to 32mm |
| 368 | Battery Charger 12v to 36v, 10 AMPs, 7AH |
| 369 | Oil Can 500ml |
| 370 | Oil syringe 500 ml |
| 371 | Multi plug Drain Spanner |
| 372 | Tyre level |
| 373 | Valve Die - Tubeless type |
| 374 | Allen Key set of 12 pieces 2mm to 14mm |
| 375 | Adjustable spanner (pipe wrench) 350 mm |
| 376 | Battery –charger Capable to charge batteries from 5AH – 150AH. |
| 377 | Car Jet washer with standard accessories |
| 378 | Drill twist (various sizes) 1.5 mm to 8 mm by 0.5mm |
| 379 | Engineer’s square Blade size 15 cm |
| 380 | Engineers stethoscope |
| 381 | File, half round ,second cut 20 cm |
| 382 | File, Square second cut 20 cm |
| 383 | File, Square round 30 cm |
| 384 | File, triangular , second cut 15 cm |
| 385 | Flat File , second cut 25 cm |
| 386 | Flat File , bastard 35 cm |
| 387 | Growler |
| 388 | Hacksaw frame adjustable 20-30 cm |
| 389 | Hammer Ball Peen 0.75 Kg |
| 390 | Hammer copper with handle 1 Kg |
| 391 | Hollow Punch set of seven pieces 6mm to 15mm |
| 392 | Oil can 0.5/0.25 liter capacity |
| 393 | Philips Screw Driver set of 5 pieces (pozidrivandtorx drive) 100 mm to 300 mm |
| 394 | Piston ring compressor |
| 395 | Piston Ring expander and remover. |
| 396 | Portable electric drill Machine Upto 10mm (heavy duty) |
| 397 | Scriber 15 cm |
| 398 | Scriber with scribing black universal |
| 399 | Spanner T. flocks for screwing up and up-screwing inaccessible |
| 400 | Spanner, adjustable 15 cm |
| 401 | Spark plug spanner 14mm x 18mm x Size Long bit for Alto/800 |
| 402 | Stud extractor set of 3 |
| 403 | Stud remover with socket handle |
| 404 | Universal puller for removing pulleys, bearings |
| 405 | Vice grip pliers |
| 406 | Bench Vice (12cm Jaw) |
