Tender For Providing Street Light And High Mast Network System At Industrial Area Salon (Vespa) , Distt- Raebareli
Tender Value
2.37 Crore
Estimated cost
Bid Submission
30 Nov 2024
0 days left
EMD
5.61 Lakhs
Bank guarantee accepted
Document Fee
6262
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
salon → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Street Light And High Mast Network System At Industrial Area Salon (Vespa) , Distt- Raebareli
BOQ
| Sl. No. | Item Description |
| 1 | S/F of 6 Amp. To 32 Amp. SP MCB (10KA) C curve Cat-B as per UPPPWD sch No1002 |
| 2 | S/F of heavy duty cadmium plated copper connector with end plate complete in all respects (c) four way connector HKM 100 as per UPPPWD Sch. No. 1128 |
| 3 | Supply & Erection of 8 Mtr. Long GI Octogonal Pole of Approved make having (70mm top dia, 135 mm bottom dia,base plate 12 mm thick) having 3 mm thickness with single arm bracket (1 Mtr. length) on RCC foundation including the cost of foundation, foundation bolts ,excavation & back filling and required T&P complete in all respect as per PWD Sch. No. 643 as per approved make |
| 4 | Supply & Erection of 8 Mtr. Long GI Octogonal Pole of Approved make having (70mm top dia, 135 mm bottom dia,base plate 12 mm thick) having 3mm thickness with double arm bracket (1 Mtr. length) on RCC foundation including the cost of foundation , foundation bolts ,excavation & back filling and required T&P complete in all respect as per PWD Sch. No. 644 as per approved make |
| 5 | S/F of crimping, solderlesscopper tin electroplated lugs of Dowells/Ismail make suitable for 1.5 sq mm to 6 sq. mm cables, including tapping with insulating tape complete in all respects as per UPPWD sch. No. 1129 |
| 6 | Supply & wiring of submain with 2 Nos. of 2.5 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cables in existing conduit complete with supply of all material labour and T&P reuired for proper complation of the work as directed as site byEngineer I/C as Per UPPWD Sch No. 289(KEI/ Havells/ Grandley/Gloster/Polycab Make ) |
| 7 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (K) 35 sq. mm 3.5 core |
| 8 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (j) 25 sq. mm 3.5 core |
| 9 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (I) 16 sq. mm 4 core |
| 10 | S/F ofpalm or pin type copper tin plated cablesocket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (f) 35 sq. mm |
| 11 | S/F ofpalm or pin type copper tin plated cablesocket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (e) 25 sq. mm |
| 12 | S/F ofpalm or pin type copper tin plated cablesocket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (d) 16 sq. mm |
| 13 | S/B of 40 mm dia x 4.5 mtr. Long GI pipe vertical for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. From the bottom complete with earthing lead of no. 6 to 8 SWG GI wire in GI pipe upto appron upto switch board 30 CM square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 701 |
| 14 | S/B of 600x600x6mm GI plate vertical for earthing with its top at least 3 M. below ground levelcomplete with20 mm dia. GI pipe and funnel for watering andone earthing leads of no. 8 to 10 SWG GI wire in 15 mm diaGI pipeupto switch board (from appron to switch board the cost of GI pipe snd GI wire be extra)30 CM square C.I. framewith hinged cover masonary housingalternate layers of charcoal /Coke and saltat least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 702 |
| 15 | Supply and laying of 25 mm x 3mm G.I. strip from earth electrode directly in the ground as required respects as per UPPWD Sch. No. 716 |
| 16 | Supply & Erection offactory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuse and The instrument chamber shall be separate and shall comprise of flush type ammeter,voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc complete in all respects. (Incoming 200 Amp., TPN-1 No. & outgoing 100 Amp. TPN-1 No and 63 Amp. TPN-3 Nos.. as per UPPWD Sch. No. 802-C-II |
| 17 | S/F of following capacity of automatic street light cubical cantrol panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series/Digitalwith with ML-4 Contractor, HRC fuses, isolating switch metering instuments box with CTS etc. as per UPPWD Sch. No. 807F (40 Amp. TPN) |
| 18 | Supply and fixing 25amp.TPN Capacity of Automatic street light cubicle control panel painted with Anti corosive alkali and acid proof paint, consisting of time switch TSO 100 serices/ Digital with ML-4 Contractor, HRC Fuses Isolating switch, metering Instrument & Instrument box with C.T. etc. Complete in all respect\"s.as per UPPWD Sch. No.807(E)(ii) |
| 19 | Sypply & laying of 90 mm dia DWC pipe ISI marked along with all accessories likesocket, bend, couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm delow ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. (only road crossing) |
| 20 | Supply and fixing ofLED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect. Make as per direction of the Engineer- incharge Catt. AA as per UPPWD Sch. No.1424Cat -AA (Bajaj, Crompton, Philips, Wipro Make) |
| 21 | Supply and fixing of 200 watt factory wired integral LED flood light luminaires with die cast aluminium housing built with driver set suitable for confirming to IP 66 protection complete in all respects. Make as per direction of the Engineer- incharge Catt. AA as per UPPWD Sch. No.1455 (Bajaj, Crompton, Philips, Wipro Make) |
| 22 | Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. make as per direction of the Engineer- incharge as per UPPWD Sch. No.652, (Bajaj, Crompton, Philips, Wipro Make) |
| 23 | Supply&Fixxing of of UPSIDA LOGO Plate (Retro-reflective) on High Mast including cost of clamp nut & bolts all material men and T&P complete in all respect |
| 24 | Supply and laying of aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level in existing HDPE/DWC/GI Pipe complete in all respects (KEI/ Havells/ Grandley/Gloster/Polycab Make )) {as per PWD Sch. No. 501(j) - Sch No. 507} 25 sq.mm 3.5 core |
| 25 | Supply and laying of aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level in existing HDPE/DWC/GI Pipe complete in all respects (KEI/ Havells/ Grandle/Gloster/Polycab Make ){as per PWD Sch. No. 501(k) - Sch No. 507} 35 sq.mm 3.5 core |
| 26 | Supply and laying of aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level in existing HDPE/DWC/GI Pipe complete in all respects ( Havells/ Grandley/ Gloster / KEI/Polycab Make ){as per PWD Sch. No. 501(i) - Sch No. 507} 16 sq.mm 4 core |
| 27 | S/F of Heat Shrinkable jointing kit suitable for XLPE 11 KV HT cable outdoor type including all materials, labour and T&P required for proper competion of work.(Raychem/Denson/Birla /3M make) |
| 28 | Making plinth for installation of transformer of size 1x1.5x1.10 M plinth complete with excavation base concrete with 1:4:8 (padding) first class brick work in ratio 1:3, CC work and plastering as per design. |
| 29 | Supply, installation, testing & commissioning of outdoor type Aluminium wound oil cooled transformer of rating 63 KVA, 11/0.433 KV complete as per IS-1180-2014 Level-I as per approved list of UPPCL |
| 30 | S/F of 11 KV straight through jointing kit heat shrinkable type for 11 KV cable including cost of material, labour and T&P etc. for proper complaion of work(Raychem/Denson/Birla /3M make) |
| 31 | Constructing brick masonry chamber (inside dimentions 900x800 mm and 60 cm deep for single pipe line) for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover with frame to be not less than 38 Kg. (weight o\"cover 23 Kg. and weight of frame 15Kg.) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size ), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design. |
| 32 | Supply & laying 70 sq mm 3 core Al. conductor XLPE insulated PVC bedded galvanised flat steel striparmoured, served, sheated cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 506 (d)(Havells/KEI/ Grandley/Gloster/Polycab Make ) |
| 33 | S/F welded wire mesh fencing of 5x3x2.4 mtr. And 2x2.4 M gate for transformer including excavation base concrete brick work back filling etc. complete in all respects as per UPPWD Sch. No. NS90 |
| 34 | Supply & laying of 120 mm dia HDPE DWC pipe ISI marked along with all accessories likesocket, bend, couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm delow ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as per E/I |
| 35 | Supply and fixing of 100 mm dia G.l.pipes B,class for climbing up the cable from ground to over head line including all accessories,materiaIs,labours and T&P required for proper completion of work as per specification SIDC schedule No E25.01 |
| 36 | Supply and fixing of anticlimbing device fabricated from G.I. flat of 25 mmX6 mm size in a shape of ring of the pole size,having G.l.flat pointed fins of length 225 mm in 8 nos and also barbed wire in 200 mm length above the said ring including all material labour T&P.etc complete.SIDC schedule NoE26.01 |
| 37 | Supply & fixing of danger board fabricated from 10 gauge MS sheet as approved by engineer in charge complete in all respect as per SIDC Sch.No.E27.02 |
| 38 | Supply & erection of stay of Composite mains for ST pole with GI anchor plate (152X152X6mm)stay rod (16mm dia X 1.85 m Iong),GI stay bow (16 mm dia rod,thimble,double stay tightener,clamps & stay wire (GS 7/3.15 mm) including grouting in 1:4:8 ratio of cement concrete using coarse sand,over burnt brick ballast as per direction of engineer in charge complete in all respect |
| 39 | Supply & fixing of Straight M.S.channel 75X40 mm,2.24m long complete as per SIDC Sch.No.3(3) |
| 40 | Supply & fixing of straight MS Channel 100 x 50 mm 1.15 M long complete as per SIDC Sch. No. 36.02 ER(03.3.01) |
| 41 | Supply & fixing of clamp suitable for securing the above channel complete as per SIDC Sch.No.3(4) |
| 42 | Supply and fixing of 11KV TPMO Switch of 400 amps. Copmlete in all respect as per direction of Engineer in charge complete incuding all T&p, men and material required for proper completion.UPSIDC 35.28 |
| 43 | S/F of 11 kV three phase D.O. fuse set complete with suitable clamps, nuts & bolts, fuse wire etc. |
| 44 | Supply and erection of Double Pole structure consisting of 410-SP-55,11m long227 Kg complete steel tubular pole to be grouted as 1/6th of overall length below ground level with 45 cm dia cement concrete plinth around the pole & 45 cm above the ground level. The foundation of underground will not be less than 20 cm thick layer of cement concrete in the ration of 1:3:6 ( cement : coarse sand : over burnt brick ballast/stone ballast). The brick ballast / stone ballast will be used of 1.25 cm size with stone pad of 30X30X7.5 cm at the base. The cost includes all men and material.UPSIDC schedule No E04A.1.I |
| 45 | S/L M.S. steel pipe for 200 mm dia (by trenchless method) made out of steel plate as per IS 2062 grade Fe-400 6mm thick as per IS:3589. The pipe will be laid at a depth of 2m to 3m as per direction of E/I 200 mm dia . |
| 46 | supply & Fixing of LED light strip with off-white Tri colour light complete with driver etc.complete in all respect . warranty one years, ( Philips, Bajaj, Crompton, Wipro Make) |
| 47 | Surface mounted outdoor rated luminaire with multi directional beam made of pressure die castand in anthracite finish. 12W Integrated LED luminaire with min lumen output of 940 luman in 3000K. Equivalent Makes: ( Philips, Bajaj, Crompton, Wipro Make) (warranty 3 years against the Manufacturing Defect, date of Installation through Contractor) with M.S Cage for LED Lights. |
| 48 | SupplyInstallation testing and comissioning of Spike Light in 3 Wmade of pressure die casthaving IP 65 ans IK 06 comlies to IEC 60598 , EMC Standards (warranty 3 years against the Manufacturing Defect, date ofInstallation through Contractor) with M.S Cage for LED Lights . ( Philips, Bajaj, Crompton, Wipro Make) |
| 49 | Supply and laying & concealingof 25mm dia ,2mm thick PVC conduit pipe with ISI marked embossed and with PVC acessories confirming to IS No. 3419 like bends,couplers,staples and other acessories for drawing wires duly sealed at joints,plastering with cement sand mortar finished to level with mathing colour wash including cost of all material labour and T&P. UPPWD Sch item No. 149(A) |
| 50 | Supply and laying ofPVC corrugated conduits of 25 mm outer dia on surface with required fixing acessories including cost of all material labour and T&P. UPPWD Sch item No. 185(I) |
| 51 | Supply & fixing 75mm x75mm x 60mm ideep metal box in recess with suitable size phenolic laminated sheet cover in front including cutting of wall and making good the same by cement etc. |
| 52 | Fabrication,Supply & Fixxing of work information board in M.S frame made by 50 mm dia sqaure pipe of stainless steel grade SS-304 &16 mm thick base plate with back supporting of bracing by MS flat of 25x6 mm and 2.85 Mtr. Long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green colour with white letters as required and shall be fixed at a height of 1.2 Mtr. from ground by providing 0.45x0.45x0.60 Mtr. cement concrete stone pad as per drawing . |
AI Tender Summary
Tender Timeline
Nov 23, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 02, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender