}

Tender For Betterment Work Of Electrification At Shatabdi Nagar Sector 4A - Supply & Fixing Of Laying 10 Sqmm X 2 Core Aluminium Unarmourd (Psr) 2 5 Supply And Burying Of 40Mm Dia X 4.5 Metres Long G.L. Pipe Vertically For Earthing Having 12Mm Dia. Hole, meerut-Uttar Pradesh

Meerut Development Authority has published Tender For Betterment Work Of Electrification At Shatabdi Nagar Sector 4A - Supply & Fixing Of Laying 10 Sqmm X 2 Core Aluminium Unarmourd (Psr) 2 5 Supply And Burying Of 40Mm Dia X 4.5 Metres Long G.L. Pipe Vertically For Earthing Having 12Mm Dia. Hole. Submission Date for this Tender is 04-12-2024. Electrification Work Tenders in meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

46340332
Tender For Betterment Work Of Electrification At Shatabdi Nagar Sector 4A - Supply & Fixing Of Laying 10 Sqmm X 2 Core Aluminium Unarmourd (Psr) 2 5 Supply And Burying Of 40Mm Dia X 4.5 Metres Long G.L. Pipe Vertically For Earthing Having 12Mm Dia. Hole
Tender
Indian
Uttar Pradesh
Meerut
04-12-2024

Tender Details

Betterment Work Of Electrification At Shatabdi Nagar Sector 4A - Supply & Fixing of Laying 10 sqmm x 2 Core aluminium unarmourd (PSR) 2 5 Supply and burying of 40mm dia x 4.5 metres long G.l. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.L wire and pipe will be extra) upto switch board, 30cm square CL. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing SI No-701/2018 3 Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single armbracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. (SI No-641/2018) 4 Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. (SI No-652/2018) 5 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect. (SI No-1454/2018) 6 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP66 Protection complete in all respect. Catt-AA SI No-1422 7 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 30Watt. to 40 Watt. Confirming to IP 66 protection complete in all respect. Catt-AA SI (No-1420/2018) 8 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (SI No-501/2018) (i)10 sq. mm 4 core (h) 9 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (SI No-501/2018) (ii) 16 sq. mm 4 core (i) 10 Dismantling of Old Pole & Refixing steel tubular pole 9.50 Metre long designated 410 SP-36 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. (SI No-616/2018) (1299 + 1299)=2598 11 S&F of 32 Amp. 415 V metal clad T.P.N. rewireable type switch fuse unit on angle iron bracket complete in all respect. (SI No-315/2018) 12 Supply & Saging of 1 x 35 + 1 x 16 ABC Conductor for Street light. (PSR) 13 Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. (SI No-634/2018) 14 Supply and Fixing of 63 mm dia HDPE Pipe for underground Armourad Cable (PSR) 15 Supply and Making of Maneaul Trenchless for Underground Armoured Cable (PSR) 16 Making suitable M.S earth rod of 2.5 mt long 20 mm dia 8 G.i wire include the cost of all material, labour, T&P etc complete in all respect. (PSR) 17 Supply & Laying 2.5sqmm x 3 Core Copper Wire for LED Street Light. (PSR) 18 Supply and Fixing of 50 x 6 mm MS Flate D Clamp. complete in all respect as per direction of the Engineer-Incharge. SI No.(623/2018) 19 Supply and Fixing of 100 x 110 Shackle Insulater with Sutable nut Volts. complete in all respect as per direction of the Engineer-Incharge. (SI No. 621/2018) 20 Supply & erection of stay set at least 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 cm x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm x 600 double screw tightener, 7/4.00 mm G.I stay wire etc. in 1:3:6 cement concrete complete in all respect.(SI No-630/2018)

Key Value

Document Fees
INR 2350 /-
EMD
INR 23000.0 /-
Tender Value
INR 11.28 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail