Tender For 33418331 - 500Mm Butterfly Valve - Blast Furance, Hazira-Gujarat

Tender For 33418331 - 500Mm Butterfly Valve - Blast Furance 33418331 0001 0001 300832854 VALVE,BUTTERFLY,500MM,9BAR,FLNG,ELE,CS Technical Details Name : Sunil Kumar Prasad Contact : Email : SUNIL.PRASAD@AMNS.IN 3 NO VALVE,BUTTERFLY TYPE DESIGN : TRIPLE OFFSET , SIZE (DN) : 500 MM END CONNECTION TYPE : DOUBLE FLANGE LONG PATTERN END CONNECTION STANDARD DETAILS : 150 (AS PER ASME B16.5) PRESSURE, OPERATING : 9 BAR , TEMPERATURE, WORKING : 95 DEG.C TYPE, SEAT : MOULDED , MATERIAL, BODY : CAST STEEL BODY MATERIAL GRADE : WCB , MATERIAL, DISC : STAINLESS STEEL DISC MATERIAL GRADE : SS316 (CF8M) , MATERIAL, SEAT : METAL SEAT MATERIAL GRADE : STELLITED 21 , SERVICE MEDIA : SLURRY COATING, DISC : GRAPHITE , OPERATION : ELECTRIC ACTUATOR ROTATION : BI-DIRECTIONAL , PERFORMANCE AND TEST CERTIFICATE : REQUIRED ACTUATOR TYPE : ELECTRICAL MULTI TURN COIL VOLTAGE/POWER SUPPLY : 415 VAC OPERATING AIR PRESSURE FOR ACTUATOR : 9 KG/CM2 MANUAL OVERRIDE : REQUIRED , FAIL SAFE : STAY PUT ADDITIONAL INFORMATION : SHAFT MATERIAL : 17.4 PH, DISC SEAL MATERIAL: UNS S31803 + GRAPHITE, RETAINER MATERIAL : SS316, WITH OUT INTEGRAL STARTER, TYPE OF COMMUNICATION: HARDWIRE,ADDITIONAL PUSH BUTTON STATION REQUIRED.ACTUATOR MAKE : AUMA OR EQUIVALENT,BOLTING : B7/2H Item Details : ADDITIONAL INFORMATION: 1. VENDOR TO SUBMIT QAP AND GA DRAWING ALONG WITH OFFER/ QUOTATION FOR TECHNICAL EVALUATION PURPOSE. THIS IS MANDATORY. 2. IN CASE OF ANY QUERY VENDOR MUST TO DUSCUSS WITH THE SITE OR MAY VISIT THE SITE FOR TECHNICAL DUSCUSSION BEFORE SUBMITTING THE OFFER. 3. VENDOR TO SUBMIT FINAL GA DRAWING WITH DIMENSIONAL DETAILS FOR APPROVAL BEFORE MANUFACTURING. MATERIAL REQUIRED AS PER APPROVED DRAWING ONLY. IN CASE OF ANY DEVIATION FOUND DURING INSPECTION AT AMNS SITE, MATERIAL SHALL BE REJECTED AND VENDOR TO SUPPLY NEW ITEM AT THEIR OWN COST. 4. VENDOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS AND MOC TEST CERTIFICATES AND PHOTOGRAPHS FOR SITE REVIEW BEFORE PACKAGING <(>&<)> DISPATCH OF THE MATERIAL AND TO ISSUE DCC FROM SITE. 5. VALVES TO BE SUPPLIED ALONG WITH TWO SET OF MATCHING FLANGES <(>&<)> FASTENES AND GASKETS. 6. IN CASE OF ANY TECHNICAL QUERY, VENDOR MAY DISCUSS OR SEND MAIL TO CLARIFY ALL QUERIES PRIOR TO

Refer document

Refer document