To Purchase And Install Necessary V.C. Equipment For Video Conference In The Meeting Auditorium Building At The District Collector Office. (Mla Fund)- 1 Supply, Installation, Testing & Commissioning of Chairman Unit with fixed microphone and flexible stem prority button for chairman microphone ,optioal chime tone facility for proceeding chairman announcement with two headphone socket built in loudspeaker is automatcally muted when the microphone is on/off button chairman mike unit should have a frequency responce 400hz to10hz ,length of microphone from base to steam should not be less than 488 mm in size ;nominal acoustic input 85 db SPL,dimensions (without microphone) (HxWxD) 50x135x135 mm; weight of unit should not be less then 1.2 kg ;operating temperature -5°C to +45°C,two 3.5mm (0.14 in) stereo headphone sockets; including make connecion testing etc complete as per pre approved by Engineer in charge.For additional technical parameters of products/work, refer Annexure A attached with P.W.D. Electrical B.S.R. 2022 2 supply, Installation, Testing & Commissioning of Delegate mike Unit with fixed microphone and flexible stem prority button for Deligate mike microphone ,optioal chime tone facility for proceeding Delegate mike announcement with two headphone socket built in loudspeaker is automatcally muted when the microphone is on/off button Delegate mike unit should have a frequency responce 400hz to10hz ,length of microphone from base to steam should not be less than 488 mm in size ;nominal acoustic input 85 db SPL,dimensions (without microphone) (HxWxD) 50x135x135 mm; weight of unit shouldnot be less then1.2 kg ;operating temperature -5°C to +45°C,two 3.5mm (0.14 in) stereo headphone sockets; including make connecion testing etc complete as per pre approved by Engineer in charge.For additional technical parameters of products/work, refer Annexure A attached with P.W.D. Electrical B.S.R. 2022 3 Supply, Installation, Testing & Commissioning of Control Unitfor giving power to chairman unit asd delegate unit with inbulit 3 band equlilzer unit comprrising of knobs at 250hz, 2khz and 8khz volume control for 1 mic input 8 pin din connector for loop through should also consistsmicrophone input with xlr connector with rated output impedance of 1000ohm and systems should have capability to control up 50 dicussion unit,unit dimensions shouldnot be less then(85mm x 360mm x 250 mm) in size; including make connection testing etc approved by Engineer in charge.For additional technical parameters of products/work, refer Annexure A attached with P.W.D. Electrical B.S.R. 2022 4 SITC of 30 Watt speaker with taping facility having frequency range of 65Hz-20KHz@(-10db) with power handing of 200Watt continuous and more than 350 Watt @peak etc complete as per pre approved by Engineer in charge.For additional technical parameters of products/work, refer Annexure A attached with P.W.D. Electrical B.S.R. 2022 5 Supply & Installation of 240 Watt Mixer Amplifier Unit- for providing a crisp call or clear music with 4 microphone / line inputs, plus music source input, announcement only output, 3 wire volume override, with Mains power supply 230 VAC ±10%, 50 Hz (reduced power at lower mains),Inrush current 20 A , Power consumption 120W, Frequency response (Line) 80 Hz to 18 kHz (+1/‑3 dB @‑10 dB ref. rated output) Frequency response (Mic.) 80 Hz to 18 kHz (+1/‑3 dB @‑10 dB ref. rated output) Distortion <1%@ rated output power, 1 kHz Bass Control Max. ± 8 dB Treble Control Max. ± 8 dB, including making connection etc complete etc complete as per pre approved by Engineer in charge.For additional technical parameters of products/work, refer Annexure A attached with P.W.D. Electrical B.S.R. 2022 6 Supply& laying of 8 core shielded cable for extension cable for contribution unit /control unit interconnection making connection testing etc complete as per pre approved by Engineer in charge.For additional technical parameters of products/work, refer Annexure A attached with P.W.D. Electrical B.S.R. 2022 7 Supply & Laying of 2 Core size 0.5 sqmm copper shielded Cable for connectings Microphones with related conduits / fittings / termination, etc complete as per pre approved by Engineer in charge.For additional technical parameters of products/work, refer Annexure A attached with P.W.D. Electrical B.S.R. 2022 8 Supply, Installation, Testing & Commissioning of 2 input 4 output hdmi splittercomplete as per pre approved by Engineer in charge.For additional technical parameters of products/work, refer Annexure A attached with P.W.D. Electrical B.S.R. 2022 9 SITC of BIS certified company made55LED Monitor,Professional series ,Resoultion 3840x2160,2xHDMI port 1x USB Port, inbuilt media player should be as per OEM for web browser & file sharing compatibility through IP, RJ45, Wi-Fi,Bluetooth,contrast Ratio - 4000:1, Response time -8 ms ,Brightness 300 nits or higher, built in speaker, Viewing angle 178°x178°, Wall mount kit External media player compitable for above if requirdSafety & EMC Certification -CE,FCC,UL, With required HDMI Cable All as per pre approved by Engineer in charge.For additional technical parameters of products/work, refer Annexure A attached with P.W.D. Electrical B.S.R. 2022 10 Supply, Installation, Testing & Commissioning of High−performance 15 meter HDMI male to HDMI male cable Wall plate for the interoperability in all respect toetc complete as per pre approved by Engineer in charge.For additional technical parameters of products/work, refer Annexure A attached with P.W.D. Electrical B.S.R. 2022 11 Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) inrecessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & its ISI marked (IS:3419-1988)accessories, Hot Dipped GalvanizedModular box of 1.2 mm thick with earth terminal, 10 A modularswitch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSR On board 12 Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification ofWiring accessories refer ChapterE - 07related item & For additional technical parameters of product / work refer Annexure A attached with this BSR 13 S&F following sizesof ISI marked ( IS:14927 P - II ) virgin materialUPVC trunking along with accessorieslike coupler, inner, outer, elbow, square box, tee, end cap etc. on surfacewithscrews, expansionfastenersas required. For additional technical parameters of product / work refer Annexure A attached with this BSR 32 mm x 12 mm 14 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR 2 x 2.5 sq. mm. + 1x1.5sqmm 15 Providing & Fixing of IP20, 2x2 LED Surface/ Recessedmounting Mid power SMD type LED Light fixture not less than 50mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 4 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection(Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 ,life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Recessed Mounting Minimum lumen output 3600 lm 16 Supply, Installation, Testing & Commissioning of BIS certified company made 55 LEDMonitor Professional series,Resolution 3840X2160 ,2X HDMI port 1X USB Port, Inbuilt Media Player-should be as per OEM for web browser & file sharing compatibilty through IP ,RJ45,Wi-Fi, Bluetooth,Contract Ratio -4000:1, Resonse time -8ms, Brightness 300nits or higher Built in speaker Viewing angle 178 X178 degree ,all mount kit External media player compatible for above if required Safety & EMC Certifications- CE,FCC,UL ,with required HDMI cable All as pre approved by Engineer in charge. For additional technical parameters of products/works refer Annexure A attached with P.W.D. Electrical B.S.R. 2022 available at PWD rajasthan website. 17 Supply, Installation, Testing & Commissioning of High−performance 19.5 meter HDMI male to HDMI male cable that supports signals up to 4K@60Hz (4:4:4), Deep color Should have Gold Plated pins Should have lockable connectors Should be of same make of Switcher,Scaler,Wall plate for the interoperability in repsect to approved make -Kramer/Manhatten/Crestron
