Making Accessible Building Features Under Accessible India Campaigning At Rajasthan High Court Building Jaipur (Sanitary Work) (Sanction Work)- 1 Half brick masonry in superstructure above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) (B-5/5.8.2) 2 Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. In cement mortar. (B-14/14.7.3) 3 (Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix.B-14/14.2.1) 4 Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead For thickness of tiles 10mm to 25mm. (B-14/14/23.1) 5 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles conforming to IS : 13753 and IS 15622 of size 200mm x 300 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on wall and pillar) Extra for using Marble printed/Granite shade or dark shade tiles instead of White, Grey, Ivory, fume, Red brown, light green, light blue and other shades in glazed tiles and MAT finished tiles.Extra for using size above 200x300mm in glazed tiles and for using 400mmx400mm MAT finished tile in place of 300x300mm size (B-7/7.12+7.14+7.15.1) 6 Providing and fixing 1st quality MAT finished ceramic tile size 300x300mm confirming to IS : 13755 and IS 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neatcement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4 )Extra for using Marble printed/Granite shade or dark shade tiles instead of White, Grey, Ivory, fume, Red brown, light green, light blue and other shades in glazed tiles and MAT finished tiles. Extra for using size above 200x300mm in glazed tiles and for using 400mmx400mm MAT finished tile in place of 300x300mm size (B-7/ 7.13+7.14+7.15.1) 7 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size). (B-3/3.1.5) 8 Filling of sunk portion of roof with earthenpots of required height including filling voids with 1:3:6 light concrete using brick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. (B-11/11.27) 9 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc. by applying cement slurry mixed with water proofing cement compound consisting of applying (i) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with water proofing cement compound @ 0.253 Kg/Sqm The layer will be allowed to air cure for 4 hours (ii) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with water proofing cement compound @ 0.126 Kg/Sqm This layer will be allowed to air cure for 4 hours followed by water curing for 48 hours. The rates includes preparation of surface treatment & sealing of all joints, corners, junctions with polymer mixed slurry. (B-15/15.3) 10 Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish 25mm thick (B-12/12.2.1) 11 Providing gola 75x75mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 ( 1 cement : 3 fine sand) as per standard design. (B-10/10.22) 12 Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry making of lines or groove etc. complete but excluding the cost of nosing of steps etc. complete75mm thick with 20mm thick nominal size aggregate (B-11/11.3.2) 13 P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS :2556 Mark) with P or S trap including cutting and making good the wall and floor (S-1/1.4) 14 P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall. Size 610 mm x 510 mm (S-1/1.36.5) 15 Providing and fixingSuperior quality CP Brassfittings of approved make as per direction of Engineer-in-charge Revolving type towel ring (S-2/2.33.15) 16 Providing and fixingSuperior quality CP Brassfittings of approved make as per direction of Engineer-in-chargeSoap dish (S-2/2.33.16) 17 Providing and fixingSuperior quality CP Brassfittings of approved make as per direction of Engineer-in-charge Paper holder (S-2/2.33.20) 18 P & F Extension Pipe for bib cocks of approved quality/make. C.P. brass of Heavy & Superior quality 100 x 15mm. (S-1/1.56.2) 19 P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. (S-1/1.59) 20 Providing and fixingSuperior quality CP Brassfittings of approved make as per direction of Engineer-in-charge Hand shower with 8 mm dia 1 mt long PVC tube & wall hook complete (S-2/2.33.21) 21 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.Flat Back (large) or half stall size 610x400x80mm. (S-1/1.14.2) 22 P&F C.P. brass Urinal spreader for large Urinal of heavy duty of approved make as per direction of Engineer-in-charge. (S-1/1.66) 23 Providing & fixing C.P.flange for 15mm dia taps. (S-1/1.60) 24 P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors Concealed pipe in wall including painting with anticorrosive bitumen paint 15 mm dia nominal boreB Class(S-2/2.1.9) 25 P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors Exposed on wall 25 mm dia nominal boreB Class (S-2/2.1.3) 26 Making connection of G.I. distribution branch with G.I. main including all fitting. Upto 25mm dia (S-2/2.3.1) 27 Providing and fixingSuperior quality CP Brassfittings of approved make as per direction of Engineer-in-chargeBib Cock with long thread 15 mm nominal size (S-2/2.33.3) 28 Providing and fixingSuperior quality CP Brassfittings of approved make as per direction of Engineer-in-charge Two way Bib Cock 15 mm nominal size (S-2/2.33.5) 29 Providing and fixingSuperior quality CP Brassfittings of approved make as per direction of Engineer-in-charge Long body Bib Cock 15 mm nominal size (S-2/2.33.4) 30 Providing and fixingSuperior quality CP Brassfittings of approved make as per direction of Engineer-in-chargeAngular stop cock with long thread 15 mm nominal size (S-2/2.33.6) 31 Providing and fixingSuperior quality CP Brassfittings of approved make as per direction of Engineer-in-chargeConcealed stop cock 15 mm nominal size (S-2/2.33.9) 32 Providing and fixingSuperior quality CP Brassfittings of approved make as per direction of Engineer-in-charge Sink cock with swinging casted spout (table mounted ) 15 mm nominal size (S-2/2.33.10) 33 P & F Square-mouth gully trap `A` grade (IS 651-1992: : marked) of approved make complete with C.I. grating, frame & Cover masonry chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type. Trap size 225 X 150 mm, ferrow cement cover with frame Internal Chamber size 450 X 450mm. (S-3/3.5.2) 34 Providing & fixing Spun –Centrifugally cast Iron Pipes (IS : 3989 Mark ) of Approved make in wall or in floor with M.S. Holder bat clamps in 10 X 10 X10 Cm. M-15 Grade concrete blocks, joints filled with CM 1:4 with spun yarn including cutting holes and making good the wall 100 mm dia (S-3/3.40.2) 35 Providing& fixing Spun –Centrifugally cast Iron Pipes fitting (IS : 3989 Mark ) in CM 1:4 with spun Yarn. 100 mm without door (S-3/3.42.2) 36 Socket (3.41.2 ii) 37 D/Door Y Tee (3.41.2 iii) 38 Tee (3.41.2 vii) 39 Bend (3.41.2 iv) 40 Cowel (3.41.2 vi) 41 Providing& fixing Spun –Centrifugally cast Iron Pipes fitting (IS : 3989 Mark ) in CM 1:4 with spun Yarn. 100mm with door (S-3/3.41.5) 42 Bend 43 Tee 44 Add extra for Lead caulked joints (IS:782-1978) in sand cast iron pipes/spun-100mm dia, 0.98 Kg. Pig lead (S-3/3.10.2) 45 Labour charges for making connection of sewer line through main hole. (S-3/3.14) 46 Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M (S-3/3.19.1) 47 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.Inside size 450 x 450mm depth upto0.5 M Cement cover with frame (S-3/3.21.2) 48 Labour charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings P or S trap. (S-1/1.9) 49 Making of hole (width up to 150 mm) in R.C.C. slab/wall/beams by power driven drilling machine complete as per direction of EI above 150 mm thick (B-14/14.58.2) 50 Supplying and fixing in walls machine cut and polished stone shelves tands and in CM 1:3 with machine cut edges Sand or other approved stone 50mm thick (B-6/6.17.2) 51 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.South Zed Black Above 3601 Cm2 Slabs (B-7/7.5.3) 52 Extra for providing opening of required size & shape for wash basins/Kitchen sink in Kitchen platform, vanity counters and similar location in Marble/ranite/stone work including necessary holes for Pillar taps etc. including rubbing and polishing of cut edges etc. complete. (B-7/7.8) 53 Extra for providing edge moulding to 15-18 mm thick marble/Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.Granite work Full Edge moulding(B-7/7.6.2.1) 54 Construction of Cement Concrete Chamber 125mm dia on depressed floor upto 45cm height from floor with C.P. doom grating (S-3/3.39.2) 55 Providing and Fixing Spun –Cast Iron floor trap (Nahani) of (IS :3989 Mark ) approved quality / make with socket down or hinged grating including cutting and making good the floor Size 100 x 100 mm (S-3/3.42.1) 56 Supplying and fixing stone lintels/bed plates of approvedquarryroughdressedincement mortar 1:4 Upto 15 cm. thick. (B-6/6.18.1) 57 Carriage of Building Rubbish Stone Metal, Grit and Ballast etc. including loading and unloading complete with all lead (G-4/4.2.13) 58 Providing and Fixing Spun Centrifugally cast Iron Pipes fittings (IS: 3989 Mark) in CM 1:4 with spun yarn 100mm without door as per direction of Engineer-in-charge Long P Trap (900mm) (S-3/3.46.B) 59 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : Gun-metal25mm nominal bore. (S-2/2.15.3) 60 Dismantling dry brick pitching in floors drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. (B-14/14.24) 61 Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : 62 15mm dia nominal bore (S-2/2.32.1) 63 25mm dia nominal bore (S-2/2.32.3) 64 Finishing with neat cement (punning). (B-12/12.7) 65 Providing & Fixing Premium quality Bottle trap internal portion 32mm, size 250mm long wall connection pipe & wall flangeas per approved by Engineer in Charge. (S-1.81) 66 P&F Looking Mirror 5mm thick of approved make with ornamental frame size 50x12 with 6mm Ply Board on Back Side Complete as per approved sample (S-1.74) 67 Providing and fixingSuperior quality CP Brassfittings of approved make as per direction of Engineer-in-charge 68 Healthfocet (Premium heavy Quality) as approved by Engineer-in-Charge (2.33.22) 69 Jet Spray(Premium heavy Quality) as approved by Engineer-in-Charge (2.33.23) 70 P & F Premiumquality water closet Seat Covers with brass hinges complete Solid PVC (ISI marked) grade-I White for EWC. (1.72) 71 P/Fwall mounted foldable hinged (Grab rail) size 750mm x 100mm (LxW) as approved design, made of 35mm stainless steel pipe having anti-bacterial Nylon surface with contour finish for better grip. Grab bar should be mounted on wall between height 200mm to 250mm from the top of W.C seat and extending 100mm to 150mm beyond the front of the W.C. Complete in all respect as per Harmonized guideline & Satisfaction of Engineer-in-Charge.Cera make (B2210108) (17.46) 72 P/f wall mounted inverted L Shaped grab bar with 700mm long bar as approved design, made of 35mm stainless steel pipe having anti-bacterial Nylon surface with contour finish for better grip. Grab bar should be mounted on wall at height of 700mm from the finish floor level complete in all respect as per Harmonized guidline & Satisfaction of Engineer-in-Charge. Cera make (B2210103) (17.47) 73 P/F wall mounted 600mm long grab bar as approveddesign, made of 35mm stainless stell pipe having anti-bacterial Nylon surface with contour finish for better grip. Grab bar should be mounted on wall at height of 800mm from the finish floor level complete in all respect as per Harmonized guidline & Satification of Engineer-in Charges. Make Cera (B2210106) (17.48
