Bids Are Invited For Fabricated Spares 1 22119010790 13 Ea Drive Sprocket (1 Duplex) As Per Drg.No.App/Sp/M/A3/675, Item No.3, Teeth Data As Per Is:2403,Case Hardened As Per Is:4432. Note: 1. To Be Supplied In Complete Assembled Condition. 2 229, Anugul-Odisha

Bids Are Invited For Fabricated Spares 1 22119010790 13 EA DRIVE SPROCKET (1 DUPLEX) AS PER DRG.NO.APP/SP/M/A3/675, ITEM NO.3, TEETH DATA AS PER IS:2403,CASE HARDENED AS PER IS:4432. NOTE: 1. TO BE SUPPLIED IN COMPLETE ASSEMBLED CONDITION. 2 22931080030 3 EA CLAMPING TABLE ASSY FOR BATH BREAKING M/C IN RS-1 AS PER DRAWING NO.:RS-I/MECH/GA/A2/10241,REV1, SHEET 1/2 & 2/2 3 22931080100 4 EA CLAMPING TABLE LEVER FULCRUM AXLE D.90 X L.358 AS PER ITEM NO.12 OF DWG NO. RSI/MECH/SPR/A2/11186, SHT.3/3,REV-1 4 22931080120 6 EA TILTING CYLINDER CLEVIS PIN D.50 X L.146 AS PER ITEM NO. 17 OF DWG NO. RS-I/MECH/SPR/A2/11186, SHT.3/3,REV-1 5 22931080180 4 EA LONG PIN D.80 X L.515 AS PER ITEM NO. 23 OF DWG NO.RS-I/MECH/SPR/A2/11186,SHT.2/3.REV-1 6 22931080190 6 EA BRACKET FOR RETRACTABLE BEAM CYLINDER OF BATH BREAKING M/C IN RODDING SHOP-I AS PER DRAWING NO.RS-I/MECH/SPR/A2/11186,SHT-1/3 CONSISTING OF ITEM NO.1 TO 6 IN ASSEMBLED CONDITION. 7 22932020110 14 EA BRACKET FOR REAR MOUNTING OF HYD CYL FOR TILTING FRAME OF FINISHING MACHINE AS PER ITEM NO.1 OF DWG NO.RS-I/MECH/SPR/A2/11115, SH.1/2,Rev-1 8 22932020120 20 EA BRACKET FOR FRONT MOUNTING OF HYD CYL FOR TILTING FRAME OF FINISHING MACHINE AS PER ITEM NO.2 OF DWG NO.RS-I/MECH/SPR/A2/11115, SH.1/2,REV-1 9 22932020190 10 EA PIN HEAD DIA.100 X 160 LG FOR TILTING FRAME OF FINISHING MACHINE AS PER ITEM NO.9 OF DWG NO.RS-I/MECH/SPR/A2/11115, SH.2/2,Rev-1 10 22950061870 2 EA LOWER TIE ROD AS PER ITEM NO.5 DRG.NO.RS/MECH/TRC/A2/7622,REV-1,SHEET NO.2/2 11 22950062130 4 EA FRONT LOWER AND REAR AXLE ITEM NO.2 AS PER DRG. NO:RS1/MECH/TRC/A2/7622-REV1,SHEET 2/2, 12 22950062200 2 EA UPPER TIE ROD AS PER ITEM NO:4 DRG. NO:RS1/MECH/TRC/A2/7622-REV-1,SHEET NO:2/2 13 22960153970 8 EA FIXING STUD D.110 X L.990 FOR THIMBLE PRESS PUNCH CYLINDER AS PER ITEM.1 DRAWING NO: ROD/SP/MECH/A3/4191,REV-01 14 22960154090 8 EA NUT FOR FIXING STUD FOR THIMBLE PRESS AS PER ITEM.2 DRAWING NO: ROD/SP/MECH/A3/4191,REV-01 NOTE: PR ITEM SL NO.13 & 14 HAS TO BE PROCURED FROM A SINGLE PARTY ON OVERALL L1 BASIS BECAUSE OF THE INTERLINKING OF MATCHING PART. 22960153970 & 22960154090. 15 22960158780 12 EA HALF RING FOR THIMBLE PRESS IN RS-1 AS PER DRAWING NO: ROD/SP/MECH/A3/4596 UOM EACH CONSISTS OF TWO HALVES RING 16 23012000630 10 EA ROLLER ITEM NO.7 AS PER DWG NO. RS-II/MECH/GA/A1/10194,Sh-1/2 & 2/2 17 23015106410 6 EA SHAFT D.50 X L.376 FOR TURBINE 330-51 MRK1 OF BUTT SHOT BLASTING M/C IN RODDING SHOP-II AS PER DRAWING NO.RSII/MECH/SPR/A3/15291 18 23042104640 300 EA ARM ROD FOR BELL GRAB TROLLEY DIA :30MM, LENGTH:700MM, MATERIAL:EN 24 ALONG WITH 2 NOS OF MACHINED WASHER OF SIZE:ID-31MM X OD-56MM HAVING THICKNESS:5MM 19 23205103040 150 ST SPECIAL S.S. BOLT AND NUT FOR OBMS AS PER DRG.NO.BUT2/MECH/SPR/A4/9191 20 23206101020 20 SET SHAFT WITH END COVER FOR APRON ROLLER IN CRS AS PER DRAWING NO. CRS/SP/MECH/A2/7307,REV-01, ITEM SL NO.-1 AND 5 21 23508154110 200 EA CLAMP FOR OUTBOARD ROLLER FOR APRON CONVEYOR IN BUTT-1 AS PER DRG.NO. BUTT/SP/MECH/A2/4236, SH.NO.1/2 AND 2/2, ITEM NO.15 MOC: MATERIAL: - ST42-S IS: 2062 22 23508154280 100 EA SHAFT FOR OUT BOARD ROLLER FOR APRON CONVEYOR IN BUTT-1 AS PER DRAWIG NO.BUTT/SP/MECH/A2/4236 SH. NO. 1/2 AND 2/2, ITEM NO.14 MOC: MATERIAL: EN 24 23 22950062060 2 EA FRONT UPPER AXLE AS PER ITEM NO.3 DRG. NO:RS1/MECH/TRC/A2/7622-REV-1 SHEET NO.2/2, Total Quantity : 904

Refer document

Refer document

Refer document