|
| 1 | M&L for repairing to pot holes of any depth, n exc 1sqm each incl sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 30mm in depth, andmaking good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg/10 sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder @0.03 Cum of premixed macadam), complete all as specified and directed. |
| 2 | M&L for preparing existing black top surfaces of roadby brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly priming/ tack coat with paving bitumen of Grade VG-10 at 5 Kg/10 Sqm, complete all as specified and directed. |
| 3 | M&L for applying evenly a priming/tack coat using paving bitumen with bituminous primer using mechanical sprayer at 10 kg/10 sqm, complete all as specified and directed. |
| 4 | M&L for bituminous premix asphaltic semi dense concrete (Job mix formula) 40mm consolidated thickness with 5% binder content using paving bitumen of Grade VG 10 by weight of total mix, spread by means of mechanical paver, rolled and compacted to required camber and gradient with power roller 8 to 12 tonne to a uniform smooth surface, complete all as specified and directed. |
| 5 | M&L for providing 75 mm thick or less premix bituminous macadam (Using Job Mix Formula), with paving bitumen VG 10 binder content of 4% by weight of total mix, laid/ rolled and compacted to required gradient and camber with power roller 8 to 10 tonne to a uniform smooth surface, complete all as specified and directed. |
| 6 | M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour white and yellow confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction, complete all as specified and directed. |
| 7 | Demolition of cement concrete (unreinforced) of any description in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 8 | M&L for 100 mm thick, PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in road side berms, complete all as specified and directed. |
| 9 | S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector fixed with and incl MS stud of suitable size as per manufactures instructions, complete all as specified and directed. |
