Tender For Ward 4 Jain Mohalla Construction Of Cc Road And Drain From Shop Of Hari Niwas To Gotra Pan Wala
Tender Value
17.25 Lakhs
Estimated cost
Bid Submission
29 Nov 2024
0 days left
EMD
51753
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mohalla → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Ward 4 Jain Mohalla Construction Of Cc Road And Drain From Shop Of Hari Niwas To Gotra Pan Wala
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of R.C.C. ramp including stacking of materials as directed be the engineer-in -charge within a distance of 60meter (200feet) all comp. the work |
| 2 | Dismentling of brick work or stone workin lime cement mortar and including stacking of material as directed be the engineer in charge within a distance of 60mtr (200 feet) all comp. the work etc. |
| 3 | deduct the cost of old bricks |
| 4 | ded the cost of old bricks/batts |
| 5 | Demolishing cement consrete manually by mechanical means including disposal of material within 50meters lead as per directin of engineer in charge nominal concrete 1:4:8 or leaner mix (ic equivalent design mix) (1239.60x-19%=1004.07) |
| 6 | Excavation in foundation in odinary soil (loam clay or sand) including lift upto 1.50m and lead upto 30M and including filling watering and ramming of excavated earth into the trenches or into the spacae between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directd by the enginer upto a distance of 30 M foundation trenches. |
| 7 | Disposal of earth up to 8.00km from site including etc. all complete work. |
| 8 | Cement concrete with 4cm gauge approved stone ballast coarse sand & cement in the proportion of 8:4:1 including supply of all materials labour tools & plants etc required for proper completion of the work. |
| 9 | Cement concrete with 2cm gauge approved stone ballast coarse sand & cement in the proportion of 4:2:1 including supply of all materials labour tools & plants etc required for proper completion of the work. |
| 10 | Supply & laying spreading and compacting 53mm to 22.4mm size stone aggregate of specified sizes tio WBM specification in uniform thickness hand picking rolling with 3 wheled road/vibratory roller 8-10tonne capacity in stages to proper grade and camber applying and brooming material to fill up interstices of coarse aggregate watering and compacting to the required density. |
| 11 | Construction of un-renforcement dowel jointed at expansion and construction joint only plain cement concrete pavement thickness as per design over a prepared sub base with 43grade cement or any other type as per clause 1501.2.2 (1:1.5:3) course and fine aggregates confirming to IS 383 maximum size in a concrete mixer of not exceeding 25mm mised in a concrete mixer of not then 0.2 cum capacity and approprate weight batcher using approved mix design laid in arpproved fixed side form work (steel channel laying and fixing of 125 micron thick polythene film wedges steel plates including leveling the formwork as per drawing) spreading the concrete with shovels rakes compacted using needle screed and plate vibrators and finished in continuous operation including provision of contraction and expansion construction joints as per norms applying debonding strips primer sealant dowel bars near approaches to bridgs/culvert and construction joints admixtures as approved curring of concrete slabs for 14days curing compound (where specified) and water finished to lines and grade as per drawing and technical specification clause 1501 including cost of polythene sheet and dowel bar and also including complete shifing of matrials & concrete etc (M-20) |
| 12 | steel work welded in built up sections/framed work. Including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings frames guard bar ladder railings brackets gates and similar work. |
AI Tender Summary
Tender Timeline
Nov 21, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedNov 29, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 30, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender