Rural Development Local Bodies Closing in 0 days TDR #46295416

Tender For Line 02 - Transport Nagar Avasya Yojana Ma Aber Jalsay Sa Pajalapurti Hatu Navin Work Of Construction Of Pump House Without Nalkup Reboring And Pumping Plant Including Nalkup Addition And Rigging Of Main Line - Transportation Moradabad From Sto

Issued by Local Bodies · moradabad, Uttar Pradesh
Tender Value
33.68 Lakhs
Estimated cost
Bid Submission
09 Dec 2024
0 days left
EMD
3.36 Lakhs
Bank guarantee accepted
Document Fee
4012
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
moradabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Line 02 - Transport Nagar Avasya Yojana Ma Aber Jalsay Sa Pajalapurti Hatu Navin Work of Construction of Pump House without Nalkup Reboring and Pumping Plant including Nalkup Addition and Rigging of Main Line - Transportation Moradabad from store 2 Transportation, Erection, Dismantling of Rig machine and its T&P 3 Transportation, Erection, Dismantling of Compressor 250/350 PSI 4 Transportation, Erection, Dismantling of 2 Cusec/ 3 Cusec O.P unit and Yield test 5 M.S Tubewell assembly with all required parts like plain pipe Soltted pipe (as required upto 50% of plain pipes) rings, well cap bail plug, clamp reducer, central guide, suport structure etc. as required & as per typed design complete in all respect. (Note- Axial Lenght of Reducer without Ring shall be measured with casing pipe) 6 300 mm dia M.S Pipe 7 200 mm dia M.S. plain pipe 8 200 mm dia M.S. Slotted pipe 9 Drilling of Bore by ring machine As Per IS : 2800 (Part I & II) 10 Drilling of 600 mm bore from GL to 60Mtr. BGL 11 Drilling of 500 mm bore from GL to 60Mtr. BGL 100 M B.G.L 12 Drilling of 500 mm bore from 100 M to 165M BGL 13 Water arrangment for construction of T.W. 14 Lowering of Tubewell Assembly with M.S rings, Bail plug, Reducer including wellding : 15 Lowering of 300 mm dia M.S. housing pipe from GL to 50 mtr BGL 16 Lowering of 200 mm dia M.S. Blind /Slotted pipe from 50 Mtr to 100 Mtr. BGL 17 Lowering of 200 mm dia M.S. Blind /Slotted pipe from 100 Mtr. to 150 Mtr BGL 18 Supply of 1.65 mm to 4.50 mm size pea gravel from Lal Quan Qunrry as per IS -4097 19 Development of Tubewell by 250 PSI capacity air compressor and 2/3 cusec O.P unit to yield sand free discharge. 20 Development and testing of Tubewell by 250 PSI capacity air compressor 21 Development and testing of Tubewell O.P unit to yeld sand free discharge. 22 Chemical and bacteriological test of water. 23 Site clearance befor and after construction of tubewell. 24 Logging of bore hole by departmental/approved electric logger 25 Lifting tackle of 3 tone capacity 6 Mtr. Lift. 26 Column Pipe 3 mtr Long heavy duty 150 mm dia 27 Supply of 03 core, 25 mm², 1100 v grade copper conductor cable having high thermal stability, bright electrolytic copper of 99.95% purity with low conductor resistance for high current carrying capacity with superior grade rubber & PVC compounds, outer sheath is made up of special grade water proof PVC/ Rubber compounds resistant to moisture, abrasion,grease, oil and other enviroment effect.cable conductor resistance shall be as per IS : 694/2010 and its latest amendments. 28 2000 LPM 48 M head 40H.P. 2900 RPM , 3 stage submersibile clear water pumping plant suitable to operate on 415 ± 5% volt, 50 HZ, 3-phase A.C. supply ( As per IS 8034 - 1989) 29 Laying and jointing of 200 mm diaRaising Main with pipe line including all material 30 200 mm dia M.S. ERWBlind pipe of 7.1 mm thickness as per IS-3589/4270 31 Tail piece reducer 250X200 mm dia flanged 32 MS elbow 200 mm dia 33 MS flange 200 mm dia 34 Gaskit 200 mm dia 35 Nut bolt 5 soot 3 36 Chamber of sluice valve 37 Cutting work of MS pipe 200 mm dia 38 Welding work of MS pipe 200 mm dia 39 Dismentling old CC Tiles ( 20X 1.0) 40 Earthwork excavation for pipe line trenches in soil mixed with single stone bolders…..( 20X1.0X1.0) 41 Laying jointing,cutting and testing etc complete for 200 mm dia pipe line…. 42 Making connection of new pipe line to main pipe line 250 X 200 mm dia. 43 Laying CC 1:6:12 for restoration of Road.(20X1x0.08) 44 S/L of Interlocking Tiles @ 15% 45 Re-Laying of Interlocking tiles @85% 46 Excavation in foundation in ordinarysoil (loam, clay or sand) including lift up to 1.5m and lead up to 50m. Filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus earth up to a distance of 50m. from the centre of the foundation trenches.(SOR 251) 47 Concrete with 40 mm gauge brick ballast, local sand and cement in proportion (12 : 6 :1) in foundations and floors including supply off all materials, labour T and P etc. required for proper completion of the work. ( SOR 273) 48 I class brick work in1:6 cement and local sand mortar in foundation and plinth including supply of all materials labour, T& p etc. required for proper completion of the work (SOR 303) 49 As in item 3a above but in superstructure includingnecessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1 brick.(SOR 307a+309+310) 50 As in item 3a above but in 1:4 superstructure includingnecessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1/2 brick wall.(Above verandha slab)(SOR 307a+309+310a) 51 20 mm thick damp proof coursewith cement and approved course sand in 1:2 including 5% water proofing materials of in the proportion as specified for proper complition of the work and including curing and shuttering as necessary.(SOR 360) 52 R.C.C work with cement, coarse sand and 20mm gauge approved stone ballast in proportion of 1:2:4 in lintels of doors and windows,slab&chhaja excluding supply of reinforcement and itsbending, but including its fixing and binding the same with 0.50mm thick binding wire(to be supplied by the contractor) and including centering and shuttering, supply of all materials, labour, T & P etc. required for proper completion of the work.(SOR 284A+286+289) 53 SLAB - varandha 54 BEAM/LINTAL-varandha 55 CHHAJJA 56 Mild steel or iron work in plain work such as R.C.C. or R.B. work (when not included, in over all rates) ,wrought to required shape as necessary incluiding bending for proper complition of thework incluiding supply of steel and.wastage. .1% of total volume of RCC.= 1.91+ 0.485+ 0.40+.072 = 2.90 m3 @ 1% = 0.028 m3 (SOR 502b) 57 Cement concrete with 20 mm gauge approved stone ballast,coarse sand and cement in the propotion of 4:2:1 including supply of all materials labour, T & P etc. required for proper completion of the work.(SOR 279)for fixing of r.s. joist 58 R.C.C. man holecover (0.85*0.85*0.10m.) (SOR 289) 59 Supply &fixing of angle iron of size 40*40*6mm door chaukhat including fixing of holdfast &125 mm size heavey duty hinges etc. complete. (SOR 517)1.20*2.10 - 1no. & 0.9*2.10-1no. 60 Supply &fixing of angle iron of size 40*40*6mm window chaukhat with grill including fixing of holdfast &100 mm size heavey duty hinges etc. complete. (SOR 517)0.9*1.50 - 4no. 61 Supply and fixing of 35 mm thick plywood doorshutter Excluding AL drop tower bolt,handle,silencer & stoper etc. complete.All the accessaries should be heavey duty & approved make & quality. 62 Supply and fix 35mm thick sheesham wood fully Panelledwindows shutters including supply and fixing of wooden cleats and stops and fixing adjustments of hinges bolts locks handles spring and other fittings 63 Providing and fixventilators (as square bar grill) over opening including supply of all materials, labour, T&P etc. required for proper completion of work. (SOR 517)300*300mm 64 12 mm thick plaster in 1:6 with cementand local sand mortar over brick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work.(SOR 586) 65 12 mm thick plaster in 1:6 with cementand local sand mortar over rough face of onebrick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work. (SOR 586+596 ) 66 20mmthick cement plaster in dado or skirting in (1:2) consisting of cement and coarse sand laid in panels finished with 3mm floating coat of neat cement or 1:5 cement and marble dust including supply of all materialslabour T & P etc required for proper completion of the work. (SOR New Item 1) 67 Earth filling in plinth including supply of necessary quantity of sand from A distance not exceeding 10 km. from the site of work and including watering, dressing, etc. Rate to include the cost of all materials, labour, T and P etcrequired for proper completion of the work. (SOR 255) 68 25mm thick 1:2:4 plain cement concrete floor with cement coarse sand and 20mm gauge stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio1:5 as specified over and including 75mm thick base concrete consisting of cement local sand and 1st class brick ballast 40mm gauge in the proportion of 1:4:8 and removing any overlapping or mortar at the joints of panels if any and giving them uniform finish including supply of all materials labourand T and P etc. required for proper completion of the work. (SOR 601) 69 40 mm thick 1:2:4 plain cement concrete floor with cement coarse sand and 20mm gauge stone ballast laid in panels finished with 3 mm floating coat of neat cement or cement and marble dust in ratio1:5 as specified.(without base concrete.) (SOR 605) 70 Painting or varnishing new iron work in small areas or new wood work with one coat priming and two coat of approved paint or varnish including supply of all materials, Labour and T & P etc required for proper completion of the work. 71 Finishing wall with water proof .Cement paint of approved make and quality over one priming coat on new work with two coats, to give an even shade. Including prepration of surface &supply of all matrials labour T&P etc. required for proper completion of the work.(SOR Ch 15 New Item 8)Quantity Same as no. 14 72 Supply of Rolled steel joistscomplete. Size 225*100mm &Length - 2.90m. ( SOR 503) 73 Fixed in position item no. 20 excluding cost of joists but including all labour in handling and hoisting etc. complete. Size 225*100mm & Length - 2.90m. 74 Supply and fix 100 mm dia. A.C. down pipe complete with rose heads bands with eye hole and groutings etc fixed to walls with suitable clamps .(c.i.bend-2,A.C..pipe-5.70, c.i.shoe-2) 75 Supply &Fixing of oxidized iron fitting for door& window. 76 Cess 77 G.S.T.

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 29-Nov-2024 Add Technical Bid 09-Dec-2024

BOQ

Name of Work: VªkaliksVZ uxj vkoklh; ;kstuk esa voj tyk\"k; ls is;tykiwfrZ gsrq uohu iEi gkml ds fuekZ.k dk dk;Z ,oa uydwi cksfjax ,oa ifEiax IykaV lfgr uydwi vf/k\"Bkiu ,oa jkbZftax eSu ykbZu fcNkus o tksMus dk dk;Z
Sl. No. Item Description
1Transportation Moradabad from store
2Transportation, Erection, Dismantling of Rig machine and its T&P
3Transportation, Erection, Dismantling of Compressor 250/350 PSI
4Transportation, Erection, Dismantling of 2 Cusec/ 3 Cusec O.P unit and Yield test
5M.S Tubewell assembly with all required parts like plain pipe Soltted pipe (as required upto 50% of plain pipes) rings, well cap bail plug, clamp reducer, central guide, suport structure etc. as required & as per typed design complete in all respect. (Note- Axial Lenght of Reducer without Ring shall be measured with casing pipe)
6300 mm dia M.S Pipe
7200 mm dia M.S. plain pipe
8200 mm dia M.S. Slotted pipe
9Drilling of Bore by ring machine As Per IS : 2800 (Part I & II)
10Drilling of 600 mm bore from GL to 60Mtr. BGL
11Drilling of 500 mm bore from GL to 60Mtr. BGL 100 M B.G.L
12Drilling of 500 mm bore from 100 M to 165M BGL
13Water arrangment for construction of T.W.
14Lowering of Tubewell Assembly with M.S rings, Bail plug, Reducer including wellding :
15Lowering of 300 mm dia M.S. housing pipe from GL to 50 mtr BGL
16Lowering of 200 mm dia M.S. Blind /Slotted pipe from 50 Mtr to 100 Mtr. BGL
17Lowering of 200 mm dia M.S. Blind /Slotted pipe from 100 Mtr. to 150 Mtr BGL
18Supply of 1.65 mm to 4.50 mm size pea gravel from Lal Quan Qunrry as per IS -4097
19Development of Tubewell by 250 PSI capacity air compressor and 2/3 cusec O.P unit to yield sand free discharge.
20Development and testing of Tubewell by 250 PSI capacity air compressor
21Development and testing of Tubewell O.P unit to yeld sand free discharge.
22Chemical and bacteriological test of water.
23Site clearance befor and after construction of tubewell.
24Logging of bore hole by departmental/approved electric logger
25Lifting tackle of 3 tone capacity 6 Mtr. Lift.
26Column Pipe 3 mtr Long heavy duty 150 mm dia
27Supply of 03 core, 25 mm², 1100 v grade copper conductor cable having high thermal stability, bright electrolytic copper of 99.95% purity with low conductor resistance for high current carrying capacity with superior grade rubber & PVC compounds, outer sheath is made up of special grade water proof PVC/ Rubber compounds resistant to moisture, abrasion,grease, oil and other enviroment effect.cable conductor resistance shall be as per IS : 694/2010 and its latest amendments.
282000 LPM 48 M head 40H.P. 2900 RPM , 3 stage submersibile clear water pumping plant suitable to operate on 415 ± 5% volt, 50 HZ, 3-phase A.C. supply ( As per IS 8034 - 1989)
29Laying and jointing of 200 mm diaRaising Main with pipe line including all material
30200 mm dia M.S. ERWBlind pipe of 7.1 mm thickness as per IS-3589/4270
31Tail piece reducer 250X200 mm dia flanged
32MS elbow 200 mm dia
33MS flange 200 mm dia
34Gaskit 200 mm dia
35Nut bolt 5 soot 3\"
36Chamber of sluice valve
37Cutting work of MS pipe 200 mm dia
38Welding work of MS pipe 200 mm dia
39Dismentling old CC Tiles ( 20X 1.0)
40Earthwork excavation for pipe line trenches in soil mixed with single stone bolders…..( 20X1.0X1.0)
41Laying jointing,cutting and testing etc complete for 200 mm dia pipe line….
42Making connection of new pipe line to main pipe line 250 X 200 mm dia.
43Laying CC 1:6:12 for restoration of Road.(20X1x0.08)
44S/L of Interlocking Tiles @ 15%
45Re-Laying of Interlocking tiles @85%
46Excavation in foundation in ordinarysoil (loam, clay or sand) including lift up to 1.5m and lead up to 50m. Filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus earth up to a distance of 50m. from the centre of the foundation trenches.(SOR 251)
47Concrete with 40 mm gauge brick ballast, local sand and cement in proportion (12 : 6 :1) in foundations and floors including supply off all materials, labour T and P etc. required for proper completion of the work. ( SOR 273)
48I class brick work in1:6 cement and local sand mortar in foundation and plinth including supply of all materials labour, T& p etc. required for proper completion of the work (SOR 303)
49As in item 3a above but in superstructure includingnecessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1 brick.(SOR 307a+309+310)
50As in item 3a above but in 1:4 superstructure includingnecessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1/2 brick wall.(Above verandha slab)(SOR 307a+309+310a)
5120 mm thick damp proof coursewith cement and approved course sand in 1:2 including 5% water proofing materials of in the proportion as specified for proper complition of the work and including curing and shuttering as necessary.(SOR 360)
52R.C.C work with cement, coarse sand and 20mm gauge approved stone ballast in proportion of 1:2:4 in lintels of doors and windows,slab&chhaja excluding supply of reinforcement and itsbending, but including its fixing and binding the same with 0.50mm thick binding wire(to be supplied by the contractor) and including centering and shuttering, supply of all materials, labour, T & P etc. required for proper completion of the work.(SOR 284A+286+289)
53SLAB - varandha
54BEAM/LINTAL-varandha
55CHHAJJA
56Mild steel or iron work in plain work such as R.C.C. or R.B. work (when not included, in over all rates) ,wrought to required shape as necessary incluiding bending for proper complition of thework incluiding supply of steel and.wastage. .1% of total volume of RCC.= 1.91+ 0.485+ 0.40+.072 = 2.90 m3 @ 1% = 0.028 m3 (SOR 502b)
57Cement concrete with 20 mm gauge approved stone ballast,coarse sand and cement in the propotion of 4:2:1 including supply of all materials labour, T & P etc. required for proper completion of the work.(SOR 279)for fixing of r.s. joist
58R.C.C. man holecover (0.85*0.85*0.10m.) (SOR 289)
59Supply &fixing of angle iron of size 40*40*6mm door chaukhat including fixing of holdfast &125 mm size heavey duty hinges etc. complete. (SOR 517)1.20*2.10 - 1no. & 0.9*2.10-1no.
60Supply &fixing of angle iron of size 40*40*6mm window chaukhat with grill including fixing of holdfast &100 mm size heavey duty hinges etc. complete. (SOR 517)0.9*1.50 - 4no.
61Supply and fixing of 35 mm thick plywood doorshutter Excluding AL drop tower bolt,handle,silencer & stoper etc. complete.All the accessaries should be heavey duty & approved make & quality.
62Supply and fix 35mm thick sheesham wood fully Panelledwindows shutters including supply and fixing of wooden cleats and stops and fixing adjustments of hinges bolts locks handles spring and other fittings
63Providing and fixventilators (as square bar grill) over opening including supply of all materials, labour, T&P etc. required for proper completion of work. (SOR 517)300*300mm
6412 mm thick plaster in 1:6 with cementand local sand mortar over brick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work.(SOR 586)
6512 mm thick plaster in 1:6 with cementand local sand mortar over rough face of onebrick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work. (SOR 586+596 )
6620mmthick cement plaster in dado or skirting in (1:2) consisting of cement and coarse sand laid in panels finished with 3mm floating coat of neat cement or 1:5 cement and marble dust including supply of all materialslabour T & P etc required for proper completion of the work. (SOR New Item 1)
67Earth filling in plinth including supply of necessary quantity of sand from A distance not exceeding 10 km. from the site of work and including watering, dressing, etc. Rate to include the cost of all materials, labour, T and P etcrequired for proper completion of the work. (SOR 255)
6825mm thick 1:2:4 plain cement concrete floor with cement coarse sand and 20mm gauge stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio1:5 as specified over and including 75mm thick base concrete consisting of cement local sand and 1st class brick ballast 40mm gauge in the proportion of 1:4:8 and removing any overlapping or mortar at the joints of panels if any and giving them uniform finish including supply of all materials labourand T and P etc. required for proper completion of the work. (SOR 601)
6940 mm thick 1:2:4 plain cement concrete floor with cement coarse sand and 20mm gauge stone ballast laid in panels finished with 3 mm floating coat of neat cement or cement and marble dust in ratio1:5 as specified.(without base concrete.) (SOR 605)
70Painting or varnishing new iron work in small areas or new wood work with one coat priming and two coat of approved paint or varnish including supply of all materials, Labour and T & P etc required for proper completion of the work.
71Finishing wall with water proof .Cement paint of approved make and quality over one priming coat on new work with two coats, to give an even shade. Including prepration of surface &supply of all matrials labour T&P etc. required for proper completion of the work.(SOR Ch 15 New Item 8)Quantity Same as no. 14
72Supply of Rolled steel joistscomplete. Size 225*100mm &Length - 2.90m. ( SOR 503)
73Fixed in position item no. 20 excluding cost of joists but including all labour in handling and hoisting etc. complete. Size 225*100mm & Length - 2.90m.
74Supply and fix 100 mm dia. A.C. down pipe complete with rose heads bands with eye hole and groutings etc fixed to walls with suitable clamps .(c.i.bend-2,A.C..pipe-5.70, c.i.shoe-2)
75Supply &Fixing of oxidized iron fitting for door& window.
76Cess
77G.S.T.

AI Tender Summary

OUR REF NO 46295416
AUTHORITY Local Bodies
TENDER VALUE 33.68 Lakhs
LAST DATE 09-12-2024
Authority
Authority Name Moradabad Municipal Corporation
Work Description Line 02 - Transport Nagar Avasya Yojana Ma Aber Jalsay Sa Pajalapurti Hatu Navin Work of Construction of Pump House without Nalkup Reboring and Pumping Plant including Nalkup Addition and Rigging of Main Line - Transportation Moradabad from store 2 Transportation, Erection, Dismantling of Rig machine and its T&P 3 Transportation, Erection, Dismantling of Compressor 250/350 PSI 4 Transportation, Erection, Dismantling of 2 Cusec/ 3 Cusec O.P unit and Yield test 5 M.S Tubewell assembly with all required parts like plain pipe Soltted pipe (as required upto 50% of plain pipes) rings, well cap bail plug, clamp reducer, central guide, suport structure etc. as required & as per typed design complete in all respect. (Note- Axial Lenght of Reducer without Ring shall be measured with casing pipe) 6 300 mm dia M.S Pipe 7 200 mm dia M.S. plain pipe 8 200 mm dia M.S. Slotted pipe 9 Drilling of Bore by ring machine As Per IS : 2800 (Part I & II) 10 Drilling of 600 mm bore from GL to 60Mtr. BGL 11 Drilling of 500 mm bore from GL to 60Mtr. BGL 100 M B.G.L 12 Drilling of 500 mm bore from 100 M to 165M BGL 13 Water arrangment for construction of T.W. 14 Lowering of Tubewell Assembly with M.S rings, Bail plug, Reducer including wellding : 15 Lowering of 300 mm dia M.S. housing pipe from GL to 50 mtr BGL 16 Lowering of 200 mm dia M.S. Blind /Slotted pipe from 50 Mtr to 100 Mtr. BGL 17 Lowering of 200 mm dia M.S. Blind /Slotted pipe from 100 Mtr. to 150 Mtr BGL 18 Supply of 1.65 mm to 4.50 mm size pea gravel from Lal Quan Qunrry as per IS -4097 19 Development of Tubewell by 250 PSI capacity air compressor and 2/3 cusec O.P unit to yield sand free discharge. 20 Development and testing of Tubewell by 250 PSI capacity air compressor 21 Development and testing of Tubewell O.P unit to yeld sand free discharge. 22 Chemical and bacteriological test of water. 23 Site clearance befor and after construction of tubewell. 24 Logging of bore hole by departmental/approved electric logger 25 Lifting tackle of 3 tone capacity 6 Mtr. Lift. 26 Column Pipe 3 mtr Long heavy duty 150 mm dia 27 Supply of 03 core, 25 mm², 1100 v grade copper conductor cable having high thermal stability, bright electrolytic copper of 99.95% purity with low conductor resistance for high current carrying capacity with superior grade rubber & PVC compounds, outer sheath is made up of special grade water proof PVC/ Rubber compounds resistant to moisture, abrasion,grease, oil and other enviroment effect.cable conductor resistance shall be as per IS : 694/2010 and its latest amendments. 28 2000 LPM 48 M head 40H.P. 2900 RPM , 3 stage submersibile clear water pumping plant suitable to operate on 415 ± 5% volt, 50 HZ, 3-phase A.C. supply ( As per IS 8034 - 1989) 29 Laying and jointing of 200 mm diaRaising Main with pipe line including all material 30 200 mm dia M.S. ERWBlind pipe of 7.1 mm thickness as per IS-3589/4270 31 Tail piece reducer 250X200 mm dia flanged 32 MS elbow 200 mm dia 33 MS flange 200 mm dia 34 Gaskit 200 mm dia 35 Nut bolt 5 soot 3 36 Chamber of sluice valve 37 Cutting work of MS pipe 200 mm dia 38 Welding work of MS pipe 200 mm dia 39 Dismentling old CC Tiles ( 20X 1.0) 40 Earthwork excavation for pipe line trenches in soil mixed with single stone bolders…..( 20X1.0X1.0) 41 Laying jointing,cutting and testing etc complete for 200 mm dia pipe line…. 42 Making connection of new pipe line to main pipe line 250 X 200 mm dia. 43 Laying CC 1:6:12 for restoration of Road.(20X1x0.08) 44 S/L of Interlocking Tiles @ 15% 45 Re-Laying of Interlocking tiles @85% 46 Excavation in foundation in ordinarysoil (loam, clay or sand) including lift up to 1.5m and lead up to 50m. Filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus earth up to a distance of 50m. from the centre of the foundation trenches.(SOR 251) 47 Concrete with 40 mm gauge brick ballast, local sand and cement in proportion (12 : 6 :1) in foundations and floors including supply off all materials, labour T and P etc. required for proper completion of the work. ( SOR 273) 48 I class brick work in1:6 cement and local sand mortar in foundation and plinth including supply of all materials labour, T& p etc. required for proper completion of the work (SOR 303) 49 As in item 3a above but in superstructure includingnecessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1 brick.(SOR 307a+309+310) 50 As in item 3a above but in 1:4 superstructure includingnecessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1/2 brick wall.(Above verandha slab)(SOR 307a+309+310a) 51 20 mm thick damp proof coursewith cement and approved course sand in 1:2 including 5% water proofing materials of in the proportion as specified for proper complition of the work and including curing and shuttering as necessary.(SOR 360) 52 R.C.C work with cement, coarse sand and 20mm gauge approved stone ballast in proportion of 1:2:4 in lintels of doors and windows,slab&chhaja excluding supply of reinforcement and itsbending, but including its fixing and binding the same with 0.50mm thick binding wire(to be supplied by the contractor) and including centering and shuttering, supply of all materials, labour, T & P etc. required for proper completion of the work.(SOR 284A+286+289) 53 SLAB - varandha 54 BEAM/LINTAL-varandha 55 CHHAJJA 56 Mild steel or iron work in plain work such as R.C.C. or R.B. work (when not included, in over all rates) ,wrought to required shape as necessary incluiding bending for proper complition of thework incluiding supply of steel and.wastage. .1% of total volume of RCC.= 1.91+ 0.485+ 0.40+.072 = 2.90 m3 @ 1% = 0.028 m3 (SOR 502b) 57 Cement concrete with 20 mm gauge approved stone ballast,coarse sand and cement in the propotion of 4:2:1 including supply of all materials labour, T & P etc. required for proper completion of the work.(SOR 279)for fixing of r.s. joist 58 R.C.C. man holecover (0.85*0.85*0.10m.) (SOR 289) 59 Supply &fixing of angle iron of size 40*40*6mm door chaukhat including fixing of holdfast &125 mm size heavey duty hinges etc. complete. (SOR 517)1.20*2.10 - 1no. & 0.9*2.10-1no. 60 Supply &fixing of angle iron of size 40*40*6mm window chaukhat with grill including fixing of holdfast &100 mm size heavey duty hinges etc. complete. (SOR 517)0.9*1.50 - 4no. 61 Supply and fixing of 35 mm thick plywood doorshutter Excluding AL drop tower bolt,handle,silencer & stoper etc. complete.All the accessaries should be heavey duty & approved make & quality. 62 Supply and fix 35mm thick sheesham wood fully Panelledwindows shutters including supply and fixing of wooden cleats and stops and fixing adjustments of hinges bolts locks handles spring and other fittings 63 Providing and fixventilators (as square bar grill) over opening including supply of all materials, labour, T&P etc. required for proper completion of work. (SOR 517)300*300mm 64 12 mm thick plaster in 1:6 with cementand local sand mortar over brick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work.(SOR 586) 65 12 mm thick plaster in 1:6 with cementand local sand mortar over rough face of onebrick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work. (SOR 586+596 ) 66 20mmthick cement plaster in dado or skirting in (1:2) consisting of cement and coarse sand laid in panels finished with 3mm floating coat of neat cement or 1:5 cement and marble dust including supply of all materialslabour T & P etc required for proper completion of the work. (SOR New Item 1) 67 Earth filling in plinth including supply of necessary quantity of sand from A distance not exceeding 10 km. from the site of work and including watering, dressing, etc. Rate to include the cost of all materials, labour, T and P etcrequired for proper completion of the work. (SOR 255) 68 25mm thick 1:2:4 plain cement concrete floor with cement coarse sand and 20mm gauge stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio1:5 as specified over and including 75mm thick base concrete consisting of cement local sand and 1st class brick ballast 40mm gauge in the proportion of 1:4:8 and removing any overlapping or mortar at the joints of panels if any and giving them uniform finish including supply of all materials labourand T and P etc. required for proper completion of the work. (SOR 601) 69 40 mm thick 1:2:4 plain cement concrete floor with cement coarse sand and 20mm gauge stone ballast laid in panels finished with 3 mm floating coat of neat cement or cement and marble dust in ratio1:5 as specified.(without base concrete.) (SOR 605) 70 Painting or varnishing new iron work in small areas or new wood work with one coat priming and two coat of approved paint or varnish including supply of all materials, Labour and T & P etc required for proper completion of the work. 71 Finishing wall with water proof .Cement paint of approved make and quality over one priming coat on new work with two coats, to give an even shade. Including prepration of surface &supply of all matrials labour T&P etc. required for proper completion of the work.(SOR Ch 15 New Item 8)Quantity Same as no. 14 72 Supply of Rolled steel joistscomplete. Size 225*100mm &Length - 2.90m. ( SOR 503) 73 Fixed in position item no. 20 excluding cost of joists but including all labour in handling and hoisting etc. complete. Size 225*100mm & Length - 2.90m. 74 Supply and fix 100 mm dia. A.C. down pipe complete with rose heads bands with eye hole and groutings etc fixed to walls with suitable clamps .(c.i.bend-2,A.C..pipe-5.70, c.i.shoe-2) 75 Supply &Fixing of oxidized iron fitting for door& window. 76 Cess 77 G.S.T.
Basic Detail
Tender No 1433/J.K./Ne.Su.N.N.M./2024-25 Dated 19-11-2024
Bidding Type Tender
Location
City moradabad
State Uttar Pradesh
Key Dates
Publish Date 29 Nov 2024
Submission Date 09 Dec 2024
Open Date 09 Dec 2024
Finance
Tender Value 33.68 Lakhs
Tender Fee 4012
EMD 3.36 Lakhs
Exemption Not Available
Document List
a1323698-78bc-487d-b186-3b49e99cdbce.html
BOQ_1712990.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 29, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 09, 2024
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Dec 09, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Dec 09, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

a1323698-78bc-487d-b186-3b49e99cdbce.html

xls

BOQ_1712990.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders