|
| 1 | Supply of following XLPE aluminum armoured cable 1.1kV garde of size. Make:Glostar / Havells/Finolex |
| 2 | (i) 4Cx6 Sq.mm |
| 3 | (ii)3½ CX 50 sq. mm |
| 4 | M.V.Cable Laying:Laying of one number PVC insulated and PVC sheathed / XLPEpower cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required |
| 5 | (i)Upto 35 sq. mm |
| 6 | (ii)Above 35 sq. mm and upto 95 sq. mm |
| 7 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm |
| 8 | Laying of one number PVC insulated and PVC sheathed / XLPEpower cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 35 sq. mm and upto 95 sq. mm |
| 9 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 35 sq. mm and upto 95 sq. mm |
| 10 | Supplying and making indoor end termination with brasscompression gland and aluminium lugs for following size of PVCinsulated and PVC sheathed / XLPE aluminium conductor cableof 1.1 KV grade as required. |
| 11 | (i)4Cx6 Sq.mm |
| 12 | (ii)3½ X 50 sq. mm (35mm) |
| 13 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thickincluding accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe of 2.7metre long etc. with charcoal/ coke and salt as required |
| 14 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as stripearth electrode,including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt& spring washer spaced at 50mm) |
| 15 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 16 | Out door type MCC Panels:- Design, manufacture, supply, installation, testing & commissioning ofMotorControl Center out door type with double door and hut type top fabricated out of 2mm thick CRCA Sheet metal with base channel for 415Volts ,50Hz AC . Supply confirming to IP65 Protectionwith switchgear and accessories as below with pad locking sealing arrangements earthing stud labeling ,painting ,interconnections, providingdanger signplates as perIS specifications. The panel shall be placed over neatly constructed &finishedpedestals to be done by thein1:3:6 cement concrete extending 500 mm above the ground leval.Panels shall be treated with seven tank process before painting as per specifications and a final approved shade of powder coated paint, , Lifting hooks shall also be provided. Approval shall be taken for each panel in the form of shop drawings before fabrication. (Detailed Technical Specification in Annexure - I) |
| 17 | (i)Outdoor MCC Panel -IIncoming:(1) 400 Amps (36kA)4 Pole MCCB -01No Make: L&T / Siemens (Microprocessor release) MTX2.0(2) RYB Indication lamps (LED Type)(3) Digital Ammeter,Voltmeter(4)400A Copper Busbars with heat shrinkable insulation sleaves(5).CTs 400/5ABus Bars:400 amps (36KA) TPNCopper bus bars with heat shrinkable insulation sleeve Outgoing:a) 3 Nos. 63amps TP/TPN MCB with 3 Nos of 25 HP star delta starter (Make:L&T) with phase monitering device. b) 3 Nos. 40 amps TP/TPN MCB with 3 Nos of 15 HP star delta starter (Make:L&T) with phase monitering device. c) 1 Nos. 32/40 amps TP/TPN MCB with 10 HP DOL starter (Make:L&T) with phase monitering device. Each compartment shall contain CT operated Digital ammeters with class:1 accuracy. LED Type indicating lamp for \"ON\" \"OFF\" \"TRIP\" in Individual compartment should have push button stations for each motor. Spare MCB\"s for starters of the following capacity :1 No.of 32/40and 63 amps TP/TPN MCB AllMCBs shall be of 10 KA breaking capacity and suitable for 15 HP and 25 HP motor duty application. MCC panel to be as per actual load and design requirements for total working of system. |
| 18 | (ii)Outdoor MCC Panel -IIIncoming:(01) 400 Amps (36kA)4 Pole MCCB -01NoMake: L&T / Siemens (Microprocessor release) MTX2.0(02) RYB Indication lamps (LED Type)(03) Digital Ammeter,Voltmeter(04) 400A Copper Busbars with heat shrinkable insulation sleaves(05) CTs 400/5ABus Bars:400 amps (36KA) TPNCopper bus bars with heat shrinkable insulation sleeveOutgoing:a) 2 Nos. 63amps TP/TPN MCB with 2 Nos of 25 HP star delta starter (Make:L&T) with phase monitering device. b) 2 Nos. 40 amps TP/TPN MCB with 2 Nos of 15 HP star delta starter (Make:L&T) with phase monitering device. c) 1 Nos. 32/40 amps TP/TPN MCB with 10 HP DOL starter (Make:L&T) with phase monitering device. Each compartment shall contain CT operated Digital ammeters with class:1 accuracy. LED Type indicating lamp for \"ON\" \"OFF\" \"TRIP\" in Individual compartment should have push button stations for each motor.Spare MCB\"s for starters of the following capacity :1 No.of 32/40and 63 amps TP/TPN MCB AllMCBs shall be of 10 KA breaking capacity and suitable for 15 HP and 25 HP motor duty application. MCC panel to be as per actual load and design requirements for total working of system. |
| 19 | Supply , Installation , Testing and commissioningof 3-Phase centrifugal Mono block Pump of Given specifications, Make: Kirloskar, Power:25HP(18.7 KW), Protection:IP55,Model: KDI-2560, Capacity:25Litres/Sec@48Meters Head, Type: Mechnical Seal, Speed:290RPM,Pipe Size:100mm Suctionx80mm Delivery MOC: Impeller: Stainless Steel ,Shaft: Stainless Steel , Shaft Sleeve:Stainless Steel( The contractor/supplier shall arrange foundation drawings in consult with manufacturer for construction of foundation platforms to accommodate each set of pumps) |
| 20 | Supply , Installation , Testing and commissioningof 3-Phase centrifugal Mono block Pump of Given specifications, Make: Kirloskar, Power:15HP(11KW), Protection:IP55, Model: Model: KDS-I555+Capacity:18Litres/Sec@50Meters Head, Type: Gland Packed , Speed:290RPM, Pipe Size:80mm Suctionx65mm Delivery MOC:Impeller: Stainless Steel , Shaft: Stainless Steel , Shaft Sleeve:Stainless Steel ( The contractor/supplier shall arrange foundation drawings in consult with manufacturer for construction of foundation platforms to accommodate each set of pumps) |
