| 2 | Fixed Type Milk Machine-- Specification- Should contain 04 nos of Milking Clusters and 04 nos of Milking BucketsShould be made up of latest technology with features like hybrid filtration, HEPA caliber filtration, antibacterial filtration, washable permanent filter, low noise emission technology motor. Vacuum system: Vacuum Tankmaterial to be of Hot Dip Galvanized rust resistant, capacity- min 15 liters, transparent lids & drain valve facility with wall mounting brackets (1 No), Electric motor: 2 Hp Single phase, 2800 rpm with on off switch and over load protection relay, CE standards (1 No), Vacuum pump: - to be Direct coupled with motor oil lubricated, 340 LPM (1 No), Vacuum Line- 50 MM 6 Kg Density, PVC pipe with clamp, bend and fittings make finolex (up to 200 Ft), Vacuum Regulator - Spring Loaded vacuum 44 to 48 Kpa adjustable (1 No), Vacuum Gauge - Dial Type, 0 to (-) 100 Kpa /(-) 360 mm Hg range (1 No), Vacuum Valves / Taps – made up of Metallic, (12 Nos)Milking Can: to be with lid, quantity – 04 nos, AISI 304 made, 1 mm thickness in body, capacity – 25 litres, Seamless finish without joint with can carrying handleFlow controlled Milking Arrangement: 4 No pneumatic with diaphragms, can operate automatically low vacuum in stimulation & stripping and Normal vacuum in milking phase based on milk let down in cattle (4 No), As per ISO 5707 pulsation rate to be 60 pulse per minute, Pulse ratio - 65:35 (65 Milking phase & 35 massage phase), Pulsation and vacuum should be checked at field levelMilk tube – 2.5 m, Short pulsation tube with each teat cup is to provided, Double Pulsation Tube to be provided – 01 no. for each can, milk tube should be non-toxic, food grade, comply BFR/FDA standards. PVC Transparent Tube to be provided, Declaration submitted, and phthalate free.Milking Cluster/ law: 04 nos, Cluster weight – 2600 gm, Claw volume – 150 CC, to be transparent, Flow rate - 9 Lit / Min, should have air admission hole, liners to be non toxic, food grade, comply BFR/FDA standards. PVC Transparent Tube provided, Declaration submitted, phthalate free, to be provided 1 ses of cleaning brush include 1 long brush for milk tube, cleaning and short brush for rubber liner cleaning.Brush with SS handle to be provided, SS Teat Cups – to be made up of SS 304 suitable to liners and to be properly fitted, should supply instruction manual.Installation and commissioning of the machine with training of farm workers is essentially required.Accessories to be provided: Vacuum pump oil 5 litre, Hygenious basix 5 litre, Teat dip cups 1 pc, calf bottle 1 pc. |
