Annual Plan-Various Anganvadi Maintenance In Aymanam Gp-Aym 358/2024-General Civil Work
Tender Value
3.09 Lakhs
Estimated cost
Bid Submission
27 Nov 2024
0 days left
EMD
7730
Bank guarantee accepted
Document Fee
685
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
aymanam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Plan-Various Anganvadi Maintenance in Aymanam GP-Aym 358/2024-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Pandavam Anganvadi ward 13 |
| 2 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 3 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 4 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 5 | OD428722/2023-2024:Providing and fixing precoated galvanised iron profile sheets(size shape and pitch)of corrugation as approved by the engineer in charge0.35mm(+0.05%)total coated thickness with zink coating 120grms per square meter as per IS:277 IN 240MPA steel GRADE 5-7 micron epoxy primeron both side of the sheet and polyester top coat15-18microns,Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single lengthupto 12 meter or as desired by engineer incharge.the sheet shall be fixed using self drilling or self tapping screws of size (5.5x55mm)with epdm seal ,complete up to any pitch to horizontal or vertical or curved surface excluding the cost of purlins,rafters and trusses and including cutting to size and shape where ever required |
| 6 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm) |
| 7 | OD426279/2023-2024:Supplying and fixing 200mm PVC rain water gutter rectangular section including fitting with32x5 mm MS flat supports at 1m intervalDetails for 6m |
| 8 | 13.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing |
| 9 | 13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) |
| 10 | 13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) |
| 11 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 12 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 13 | Perumana Colony Anganvadi |
| 14 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 15 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 16 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 17 | OD428793/2023-2024:Providing and fixing precoated galvanised iron profile sheets(size shape and pitch)of corrugation as approved by the engineer in charge0.35mm(+0.05%)total coated thickness with zink coating 120grms per square meter as per IS:277 IN 240MPA steel GRADE 5-7 micron epoxy primeron both side of the sheet and polyester top coat15-18microns,Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single lengthupto 12 meter or as desired by engineer incharge.the sheet shall be fixed using self drilling or self tapping screws of size (5.5x55mm)with epdm seal ,complete up to any pitch to horizontal or vertical or curved surface excluding the cost of purlins,rafters and trusses and including cutting to size and shape where ever required |
| 18 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm) |
| 19 | OD426290/2023-2024:Supplying and fixing 200mm PVC rain water gutter rectangular section including fitting with32x5 mm MS flat supports at 1m intervalDetails for 6m |
| 20 | Anganvadi in ward 08 |
| 21 | OD426292/2023-2024:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M- 30 grade made by block making machine with strong vibratory compaction, of approved size,design & shape, laid in required colour and pattern over and including 50 mm thickcompacted bed of 6 mm metal t etc. all complete as per the direction of Engineer-in-charge |
| 22 | 13.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing |
AI Tender Summary
Tender Timeline
Nov 20, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 29, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender