|
| 1 | Taking down cement or cement lime plaster, any description on any walls etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for rendering in CM (1:6), 10mm thick on fair faces of brick work or concrete surfaces etc includingfinished even and smooth without using extra cement up to four storey height building complete all as specified and directed by Engr In Charge. |
| 3 | M&L rendering 15mm thick in cement mortar 1:4 on other thanfair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr In Charge. |
| 4 | M & L rendering 5mm thick on ceiling surfaces in cement mortar 1:3 finished even and smooth without using extra cement etc complete all as specified and directed by Engr In Charge. |
| 5 | M&L for preparation of new plastered surfaces of walls,and applying two coats of distemper oil emulsion over a coat of primer including 3mm thick elastomeric wall care putty on wallsup to four storey height building complete all as specified and directed by engr-in -charge. |
| 6 | M&L for preparation ofold plastered or unplastered surfaces of walls and applying two coat of approved shade of oil emulsion distemper, including repairing of pot holes and cracks with putty,up to four storey height building complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for preparation on new or previously untreated walland applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over putty up to four storey height building complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for preparation of old plastered or unplastered surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface over putty up to four storey height building complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L preparation of new plastered or unplastered surface and applyingthree coats ofwhite wash on ceilingup to four storey height building complete all as specified and directed by engr-in -charge. |
| 10 | M & L preparation of oldplastered surface and applying two coats of white wash on ceiling up to four storey height building complete all as specified and directed by Engr-in -Charge. |
| 11 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.5 sqmand notn.exc 4.0 sqm (including making good with CM 1:4 and hold fast) complete all as specified and directed by Engr In Charge. |
| 12 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) area n. exc 1.5 sqmcomplete all as specifiedand directed by Engr-in-Charge. |
| 13 | S&F aluminium frame powder coated any colour(minimum thickness of powder coating 50 micron) for doors, windows, partitions, ventilators with one or more rebates including joining cleat for fixing etc. including taking down each chowkhats or frames with shutters (without taking off shutters from the frames) complete all as specified. Note : Minimum weight of aluminium section shall be 0.55 Kg/m. |
| 14 | S&F 12mm thick particle board prelaminated on both sides as in panel of door shutters partition wall, work stations including beading etc. complete all as specified and directed by Engr-in-Charge. |
| 15 | Supply and fix sheet glass 5.5 mm thick of selected quality (tinted glass) exc. 0.5 sqm each fixed to aluminium frame work with necessary rubberbeading complete all as specified and directed by Engineer in Charge. |
| 16 | S&F for powder coated aluminium doors shutters,( thickness of powder coating not less than 50 micron) aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing , handles 2 Nos in each door , hinges, anodised aluminium snap beading screws etc. complete all as specified and directed by engr-In-Charge. |
| 17 | S&F aluminium powder coated (minimum thickness of powder coating 50 micron) window and ventilator shutters, sliding type three track, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubberpacking, anodised aluminum snap beading screws etc. complete all as specified and as directed by Engr-In-Charge. |
| 18 | S&F in repair aluminiumdeco grills confirming to DG-104 grade complete all as specified and directed by Engr-In-Charge. |
| 19 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as directed by Engr In Charge. |
| 20 | S&F Factory Made Solid PVC plane Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mmthick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face,supply & fixing in frame at site complete all as specified and directed by Engr In Charge. |
| 21 | S&F150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete and specified and directed by engr-in -charge. |
| 22 | S&F150mm long aluminiumhandle cast type polished bright complete and specified and directed by engr-in -charge. |
| 23 | S&F 100 mm long butt hingesmedium weight, stainless steel, and fixedcomplete and specified and directed by engr-in -charge. |
| 24 | S & F in repair aluminium door closer hydraulically operated designation No-03, universal type, suitable for door shutters of 851 to 1000mm width and of weight of 61 to 80 Kg complete all as specified and directed by Engr In Charge. |
| 25 | Dismantling stone slab and tiles of any description or thickness in floors etc and removing the debries outside the MOD land complete all as specified and directed by Engineer-in-Charge. |
| 26 | M & L 15 mm thick screed bed or bedding layer of cement mortar (1:4), for laying of granite complete all as specified and directed by Engr In Charge. |
| 27 | M&L in repair Granite (of any type) 20mm (+/- 2mm) thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including moulding of edges, grinding and polishing complete all as specified and directed by Engr-in-Charge. |
| 28 | Supply only liquid water proofing compound only complete all as specified and directed by Engr In Charge. |
| 29 | Demolition of cement concrete in sunken portion in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge. |
| 30 | Providing and making fillet of 75mmx75mm in size with cement concrete in 1:2:4 in sunken portion, complete all as specified and directed by Engr In Charge. |
| 31 | Refilling Lime concrete with brick aggregate (Coarse) in lime mortar 1:3,in the sunken portion with the help of proper tools, equipments & plants complete all as specified and directed by Engineer-in-Charge. |
| 32 | Material & labour for 40 mm thick cement concrete 1:2:4 type B0 (12.5mm graded aggregate) mixing with and including Dr Fixit Pidiproof LW+ or equivalent complete in sunken portion upto the below level of tiling complete all as specified and directed by Engineer-in-Charge. |
| 33 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed by Engr In Charge. |
| 34 | M&L Glazed ceramic coloured tiles in vertical surface 450X 300X 7-8 /300x600x7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match includingback plaster 10 mm thick in CM 1:4 complete all as specified and directed by Engr In Charge. |
| 35 | M&L Vitrified Ceramic tiles9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed by Engr In Charge. |
| 36 | M&L for non skid ceramic joint free colouredtiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM(1:6) complete all as specified and directed by Engineer-in-Charge. |
| 37 | Taking up or down steel tubing or removing from site of 15mm borepipe complete all as specified and directed by Engineer-in-charge. |
| 38 | All as per item No 37 above but for 20mm bore complete all as specified and directed by Engineer-in-charge. |
| 39 | S&F for 15mm bore steel water tubing medium grade , galvanized, ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge. |
| 40 | All as per item No. 39 above but for 20mm bore complete all as specified and directed by Engineer-in-charge. |
| 41 | Dismantling water tanks exc 500 ltrs but not exc 1000 ltrs capacity and removing to store complete all as specified and directed by Engr In Charge. |
| 42 | S&F Rotational moulded polyethylene 1000 litres water storage tanks as per IS 12701 (cylindrical vertical with closed top) hoisted and fixed in position including necessary fittings complete all as specified and as directed by Engr-in-Charge. |
| 43 | S &F in repair 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr In Charge. |
| 44 | Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr In Charge. |
| 45 | S&F PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors including stack clamps of stainless steel with bolts & nuts etc. complete all as specified and directed by Engr In Charge. |
| 46 | All as per item No 45 above but for 75 mm dia complete all as specified and directed by Engr In Charge. |
| 47 | S&F 75 mm dia PVC pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engr In Charge. |
| 48 | S&F 100 mm dia PVC pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engr In Charge. |
| 49 | S&F in repair PVC SWR bends 110 mm complete all as specified and directed by Engr In Charge. |
| 50 | S&F in repair PVC SWR bends 75 mm complete all as specified and directed by Engr In Charge. |
| 51 | S&F in repair PVC SWR Junction piece 75 mm double (Double T)provided with access door, equal or unequal complete all as specified and directed by Engr In Charge. |
| 52 | S&F in repair PVC SWR Junction piece 110 mm double (Double T) provided with access door complete all as specified and directed by Engr In Charge. |
| 53 | S&F in repairPVC SWR vent cowl of size 110 mm complete all as specified and directed by Engr In Charge. |
| 54 | S&F in repairPVC SWR vent cowl of size 75 mm complete all as specified and directed by Engr In Charge. |
| 55 | Supplying and fixing in repair of vitreous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 56 | S&F in repair PVC SWR floor trapincluding jointing with solvent cement 75 mm dia complete all as specified and directed by Engr In Charge. |
| 57 | S&F in repairs 10 ltr capacity PVC flushing cistern coloured with accessories Flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cisterncomplete and specified and directed by engr-in -charge. |
| 58 | Supply & fixing in repair 5mm thick frame less mirror with chromium plated brass clamp screws and cupwashers or fixing arrangement to wall in repairs complete all as specified and directed by Engr In Charge. |
| 59 | S & F in repairs for 125mm dia Stainless steel grating doom with waste hole for wastepipe ( minimum weight 40 gram) complete all as specified and directed by Engr In Charge. |
| 60 | S&Fin repair gun metal, globe or gate valve with mild steel iron wheel head, screwed both ends for iron pipe & fixed for 20 mm bore complete all as specified and directed by Engr In Charge. |
| 61 | S & F in repairs 15mm CP bib tap, fancy type, cast copper alloy with crutch or butterfly handle , screwed down, screwed for iron pipe etc.complete all as specified and directed by Engr In Charge. |
| 62 | M&L in repairPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed by Engr In Charge. |
| 63 | Material and labour for false ceilings using GI snap grid system with roll-formed out of hot drip galvanised steel capings (Powder coated) main runner 38x24mm, cross Tee 29x24mm and wall angle 24x24mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceiling board, prepainted cement fibre board size 595x595x4mm thick, any texture (Lake, Hill, ocean cascade or Electra ) suspended from RCC roof/ structural members of soffits angle cleat cut out etc. to the required line and shape as per manufacturer’s recommendations at any height including dismantling of old ceiling boards including cover fillets complete all as specified and directed. |
| 64 | S&F in repair CP stop valve /angle valves, cast copper alloy, fancy type, chromium plated with long shank & cup (concealedtype) with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engr-In-Charge. |
| 65 | S&F in repairs tubular Towel rail , 20 mm dia, D Type,600mm long between flanges, brass, chromium plated withscrews andcleats etc.(Minimum weight 190 gms) complete all as specified and directed by Engr In Charge. |
| 66 | S&F in repairs soap dish,Stainless steel approximate size 160x160x90mmfixed to plugs with chromium plated brass screws etc complete all as specified and directed by Engr In Charge. |
| 67 | S&F in repair 15mm dia PVC Connection 450 mm long with nuts complete all as specified and directed by Engr In Charge. |
| 68 | S&F in repairs vitreous china wash hand basin bowl type of size 550mm x 400mm white, flat back including angle iron brackets including PVC waste pipe of 32mm dia of suitable length,and 32mm dia brass waste fitting complete all as specified and directed by Engr In Charge. |
| 69 | S & F in repair for 15 mm bore, brass, CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr In Charge. |
| 70 | S&F in repair 10mm plain toughened glass for urinal pot partition with complete fittings of SS nut bolts and clamps all as specified and as per manufacturer\"s instructions complete all as specified and directed by Engr In Charge. |
| 71 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hookincluding making connections and fixed in position complete all as specified and directed by Engr In Charge. |
| 72 | S&F in repair Toilet paper holder with flap recessed type stainless steelcomplete all as specified and directed by Engr-In-Charge. |
| 73 | S&F in repair liquid soap dispenser with s/s metallic bottle complete, all as specified and directed by Engineer-in-Charge. |
| 74 | S & F in repairs 32mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections includingnecessary packing, union and cap complete all as specified and directed. |
| 75 | S&F in repairs Vitreous China urinal half stall type, white complete all as specified and directed by Engr-In-Charge. |
| 76 | S&Fin repair 15 mm pillar taps swan neck cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nutsscrewed for iron pipes and fixed , fancy typecomplete all as specified and directed by Engr-In-Charge. |
| 77 | S&F in repair glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-In-Charge. |
| 78 | S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including fixing cast iron brackets, connecting union to pipe,over all size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed by Engr In Charge. |
| 79 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed by the Engineer-in-Charge. |
| 80 | M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed by the Engineer-in-Charge. |
| 81 | M&LBrickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius inhalf brick thick walls built in CM 1:4 complete all as specified and directed by Engr In Charge. |
| 82 | Demolition of cement concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) complete all as specified and directed by Engr In Charge. |
| 83 | M & L for75 mmthickPCC 1:3:6 type C-2 as in Plinth Protection using40 mmstoneaggregateincludingmakingjoints & fillingwithsandbitumen mastic as per complete all as specified and directed by Engr In Charge. |
| 84 | Demolition reinforced cement concrete of roofs,floors(otherthan ground floors), beams, staircases, landing, chajjas, RCC Jali and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engineer-in-Charge. |
| 85 | M&L Reinforced cement concrete nominal mix 1:2:4, type B-1 (using 20mm graded aggregate) in slabs supported on walls, beams and column in floors,roofs,landings, balconies, canopies, deck slabs and in shelves and the like complete including formwork all as specified and directed by Engr-In-Charge. |
| 86 | S& F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia upto four storey complete all as specified and directed. |
| 87 | S&F forStainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by engr-in -charge. |
| 88 | S&F precast machine pressed precast concrete interlocking paver block of 80 mm thickness, M-40 grade of any shape and size confirming to IS -15658-2006 (latest revised) with grey cement and pigment as approved over and including 50mm thick sand cushion and 100mm thick plain cement concrete, type D-2, 1:4:8,(using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping complete all as specified and directed by Engineer-in-Charge. |
| 89 | M&L for removing building materials etc. to a distance of 15km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed by Engineer-in-Charge. |
| 90 | Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete,such as switches, ceiling roses,pendents, regulators, sockets etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc.complete all as specified and directed by Engineer-in-Charge. |
| 91 | M&L for point wiring with single corePVC insulated unsheathed 1100 volt grade cable with multi strand copper conductor of size 1.5 Sq mm FRLS (Nominal area) drawn through and including non metallic rigid PVC concealed conduit, medium grade, ISI markednot less than 20mm dia, concealed inwall, ceiling with GI saddles GI screws, rawlplugs (concealed conduit wiring) with all fittings including Tee, Junction boxes and provision of pressed steel terminal modular box powder coatedof suitable sizefor mounting switch sockets and regulators and drawing continuous earth wire ofPVC insulated unsheathed 1100 Volts grade cable withstrandedcopper conductor of size 1.5 Sq mm (Nominal area) complete all as specified for the following :-Note: Cost for cutting, chasing and making good to existing surfaces are deemed to be included in the Quoted Rate. |
| 92 | one light point controlled by one way switch single pole. |
| 93 | one fan/exhaust fan and wall mounted fan point controlled by one way switch single pole. |
| 94 | one 3 pin socket outlet, 6 Amps on independent board with the cable 1.5 Sqmm size. |
| 95 | one 3 pin socket outlet, 6 Amps on same board with the cable 1.5 Sqmm size. |
| 96 | All as per item No 91 above but with 2.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 V grade IS -694 FRLS cable for continuous earth wire complete all as specified and directed by Engineer-in-Charge. |
| 97 | Supply and fix White cover plate with frame,3 module complete all as specified and directed by Engineer-in-Charge. |
| 98 | Supply and fix White cover plate with frame,4 module complete all as specified and directed by Engineer-in-Charge. |
| 99 | Supply and fix White cover plate with frame,6 module complete all as specified and directed by Engineer-in-Charge. |
| 100 | Supply and fix White cover plate with frame,8 module complete all as specified and directed by Engineer-in-Charge. |
| 101 | S & F in replacement Modular switch 1 way 6A, 1 modules suitable for 240 volt AC complete all as specified and directed by Engineer-in-Charge. |
| 102 | S&F in replacement Modular switch 1 way 16A, 1 modules suitable for 240 volt AC complete all as specified and directed by Engineer-in-Charge. |
| 103 | S & F in replacementModular Socket, 6A - 2/3 pin combined 2 module,suitable for 240 volt AC complete all as specified and directed by Engineer-in-Charge. |
| 104 | S & F in replacement Modular Socket, 16A - 2/3 pin combined 2 module,suitable for 240 volt AC complete all as specified and directed by Engineer-in-Charge. |
| 105 | Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer-in-Charge. |
| 106 | Taking down wall mounting fan and exhaust of any size dismantling blades and removing fan and blades to and deposit to MES storeafter making serviceable and refixing the same position Complete all as specified and directed by Engineer-in-Charge. |
| 107 | S&Fin repair wall mounting fan 400 mm sweep 230 Volt, rated motor speed not more than 1400 RPM, pull cord type 3 step regulator, pull cord type oscillation and mechanism for upward and downward adjustmentincluding necessary fixing arrangement for proper fixing in wall as per site requirement complete all as specified and directed by Engineer-in-Charge.. |
| 108 | S&Fin repair Exhaust fan steel body AC single300 mm sweep 230 Volt, 1400 RPMwith louver including necessary fixing arrangement for proper fixing in wall as per site requirement complete all as specified and directed by Engineer-in-Charge. |
| 109 | M & L for submain wiring with two run of singlecore 10.0 sqmm PVC insulated butunsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts gradeIS:694 marked and one run of 10.0 sqmm PVC insulated butunsheathed FRLS cable for earth continuiyconductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all accessories and fittingsall laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuity conductorof similar type cable complete all as specified and directed - 2 Runs of 10.0Sqmm singlecoreand one run of 6.0 sqmm single core cable. |
| 110 | Supply and fixingin replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCAmild steel sheet surface mounting SPN 8 way 230 volts double door type regal grey horizontal type complete all as specified and directed by Engineer-in-Charge. Note :- MCB shall be measured and paid separately. |
| 111 | Supply and fixingin replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCAmild steel sheet surface mounting SPN 12 way 230 volts double door type regal grey horizontal type complete all as specified and directed by Engineer-in-Charge. Note :- MCB shall be measured and paid separately. |
| 112 | Supply and fixing 240V 10KA \"C\" curve SPN32 Amps miniature circuit breaker (MCB) complete all as specified and directed. |
| 113 | S&F MCB SP 5 to 32 Amps 10 KA, 240 volt \"C\" Series complete all as specified and directed by engineer-in-charge. |
| 114 | S&F MCB SPN 40 Amps 10 KA, 240 volt50 Hz \"C\" Series complete all as specified and directed by engineer-in-charge. |
