|
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, & panelingto be paid for separately) For shutters/fixed portions of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 2 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 3 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 4 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge.Pre-laminated particle board with decorative lamination on both sides |
| 5 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc., with PVC/neoprene gasket etc., complete as per the the directions of Engineer-in-Charge. With float glass panes of 4.0 mm thickness |
| 6 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, Everite/Hardwyn make for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge with stainless steel cover plate & minium 1.25mm thickness |
| 7 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete (Locks as per existing suitable required models and includingremoval of old lock as directed by Engineer-In-Charge. |
| 8 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete300x10 mm |
| 9 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm for Aluminium doors |
| 10 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer of approved make (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. as directed by Engineer-In-Charge. |
| 11 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-incharge. |
| 12 | Providing 12 mm thickcement plaster of mix1:4 (1 cement: 4 fine sand) for all works as directed by Engineer incharge. |
| 13 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as perthe directions of Engineer-in-charge etc complete.Upto 5mm depth and 5 mm width |
| 14 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to aluminum windowsusing wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. |
| 15 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres |
| 16 | labour charges forfixingglazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 6 mm thickness (weight not less than 12.50 kg/sqm) |
| 17 | Labour charges for removing, repairingand re-fixing ofexisting aluminium doors/shutters including floor springs and providing hardware like pivots s.s.screws,PVC / Neoprene gasketetc., complete as directed by Engineer-In-Charge. |
| 18 | Labour charges forrepair ofaluminium window,shutters and partitions etc., providing and change of wheels, handlesPVC/neoprene gasket etc., complete as per the architectural drawings and as directed by Engineer-in-Charge. |
