Dismantling / Machining / Overhauling / Assembling Of Leyland Engine (Model 401, 402, 400/C2) & Hino (133Hp & 160Hp), kagithapuram-Tamil Nadu

Dismantling / Machining / Overhauling / Assembling of Leyland Engine (Model 401, 402, 400/C2) & Hino (133HP & 160HP)-2 LEYLAND ENGINE BLOCK- ACID CLEANING (FOR ONE BLOCK). 3 LEYLAND ENGINE BLOCK- CRACK CHECKING (FOR ONE BLOCK). 4 LEYLAND ENGINE BLOCK- RECONDITIONING OIL GALLERY LINE IN CYLINDER BLOCK. 5 LEYLAND ENGINE BLOCK- CYLINDER BLOCK HEAD STUD HOLE INSERT WORK WITH MATERIAL (FOR ONE HOLE) 6 LEYLAND ENGINE BLOCK- ENGINE BELL HOUSING SIDE INSERT WORK WITH MATERIAL (FOR ONE HOLE) 7 LEYLAND ENGINE BLOCK- TAPPED DOOR SIDE HOLE INSERT WORK WITH MATERIAL(FOR ONE HOLE) 8 LEYLAND ENGINE BLOCK-WATER RAIL SIDE HOLE INSERT WORK WITH MATERIAL(FOR ONE HOLE) 9 LEYLAND ENGINE BLOCK- CRANK CASE SIDE HOLE INSERT WORK WITH MATERIAL(FOR ONE HOLE) 10 LEYLAND ENGINE BLOCK- ALL THREAD CLEAN IN CYLINDER BLOCK 11 LEYLAND ENGINE BLOCK- TURN & SUPPLY WATER JACKET PLUG (FOR ONE BORE) 12 LEYLAND ENGINE BLOCK-CYLINDER LINERS REMOVING (FOR ONE BLOCK) – 06 NOS. PER ENGINE 13 LEYLAND ENGINE BLOCK-CYLINDER LINERS FIXING (FOR ONE BLOCK) – 06 NOS. PER ENGINE 14 LEYLAND ENGINE BLOCK- CYLINDER BLOCK BORE 0.10” SIZE BORING (FOR ONE BORE) 15 LEYLAND ENGINE BLOCK- BORING AND INSTALL SLEEVE IN CYLINDER LINER BORE (FOR ONE BORE) 16 LEYLAND ENGINE BLOCK-PISTON PIN REMOVING, CHECKING AND POLISHING(FOR ONE ENGINE)–06 NOS. PER ENGINE 17 LEYLAND ENGINE BLOCK- PISTON GROOVE CLEANING (FOR ONE PISTON) 18 LEYLAND ENGINE BLOCK- PISTON PIN BORE OVER SIZE REAMING (FOR ONE SET OF 06 NOS.) 19 LEYLAND ENGINE BLOCK- CHECK CRACK, BEND, POLISH MAIN & CONNECTING JOURNALS OF CRANK SHAFT 20 LEYLAND ENGINE BLOCK- CRANKSHAFT GRINDING MAIN & CONNECTING JOURNALS OF CRANK SHAFT 21 LEYLAND ENGINE BLOCK- NITRIDING CRANKSHAFT (LIQUID NITRIDING) 22 LEYLAND ENGINE BLOCK- CAM SHAFT BEND CHECK, CAM BUSH REMOVING, NEW BUSH FIXING AND CLEARANCE CHECKUP 23 LEYLAND ENGINE BLOCK- CHECK AND REMOVE BEND IN CAM SHAFT 24 LEYLAND ENGINE BLOCK- CAM SHAFT ALL JOURNALS 0.10” OVER SIZE GRINDING. 25 LEYLAND ENGINE BLOCK- MAIN BEARING PARENT BORE CHECKING & LINE BORING, NEW MAIN BEARING FIXING, CHECK AND ADJUST MAIN BEARING. 26 LEYLAND ENGINE BLOCK- CONNECTING ROD SMALL END BUSH FIXING, O/S BORING AND REAMING (FOR ONE ENGINE)(06 NOS. / ENGINE) 27 LEYLAND ENGINE BLOCK- BRASS WELD IN MAIN BEARING SEATING PLACE (ONE JOURNAL) 28 LEYLAND ENGINE BLOCK- TAPPET GRINDING (FOR 12 NOS. PER ENGINE) 29 LEYLAND ENGINE BLOCK-CYLINDER LINING CRACK CHECKING (FOR ONE BLOCK)–06 NOS. PER ENGINE 30 LEYLAND ENGINE BLOCK- MAIN BEARING SETTING AND CLEARANCE CHECKUP (PER JOURNAL) 31 LEYLAND ENGINE BLOCK- CONNECTING BEARING SETTING AND CLEARANCE CHECKUP (PER JOURNAL) 32 LEYLAND ENGINE BLOCK- SUMP (CRANK CASE) SEATING AREA BEND CHECKING AND REMOVING (FOR ONE SUMP) 33 LEYLAND ENGINE BLOCK- SUMP (CRANK CASE) OIL DRAIN PLUG AND MOUTH FIXING WITH MATERIAL (FOR ONE SUMP) 34 LEYLAND ENGINE BLOCK-SUMP OIL FILLER CAP MOUTH CHANGING (FOR ONE SUMP)–MOUTH PARTYS A/C. 35 LEYLAND CYLINDER HEAD- ACID CLEANING (FOR ONE HEAD). 36 LEYLAND CYLINDER HEAD- PRESSURE TEST (CRACK CHECKING) (FOR ONE HEAD). 37 LEYLAND CYLINDER HEAD-INLET AND EXHAUST VALVE SEATS CHANGING (FOR 1 HEAD-12 NOS/ HEAD) 38 LEYLAND CYLINDER HEAD- ENGINE HEAD VALVE GUIDE CHECKING AND CLEANING, SURFACE GRINDING, VALVE LAPPING AND ASSEMBLING. 39 LEYLAND CYLINDER HEAD- STUD REMOVING AND FIXING WITH MATERIAL (FOR ONE STUD) 40 LEYLAND CYLINDER HEAD- DUMMY PLUG MACHINING AND FIXING WITH MATERIAL (FOR ONE HOLE). 41 LEYLAND CYLINDER HEAD-INLET SIDE HOLE INSERT WORK WITH MATERIAL (FOR ONE HOLE). 42 LEYLAND CYLINDER HEAD–EXHAUST SIDE HOLE INSERT WORK WITH MATERIAL (FOR ONE HOLE). 43 LEYLAND CYLINDER HEAD- WATER PUMP HOLE INSERT WORK WITH MATERIAL (FOR ONE HOLE). 44 LEYLAND CYLINDER HEAD- CRACK PLACE STITCHING WORK. 45 LEYLAND CYLINDER HEAD- INLET AND EXHAUST VALVE GRINDING (FOR ONE HOLE). 46 LEYLAND CYLINDER HEAD- EXHAUST MANIFOLD 2 PIECES SEATING SEATING AREA WELDING AND MACHINING (ONE SET) 47 LEYLAND CYLINDER HEAD- VALVE DOOR BEND CHECKING AND REMOVING. 48 LEYLAND CYLINDER HEAD- VALVE DOOR (CYL. HEAD COVER) BEND CHECKING AND REMOVING. 49 LEYLAND CYLINDER HEAD- DRILL AND REMOVE STUD IN CYLINDER HEAD (FOR ONE STUD) 50 LEYLAND CYLINDER HEAD- EXHAUST MANIFOLD STUD REMOVING, OVER SIZE DRILLING TAPPING/SLEEVE FIXING AND NEW STUD FIXING WITH MATERIAL (FOR ONE STUD) 51 LEYLAND AIR COMPRESSOR - CRANK SHAFT MAIN AND CONNECTING JOURNAL GRINDING. 52 OVERHAULING OF LEYLAND AIR COMPRESSOR ASSEMBLY. 53 LEYLAND AIR COMPRESSOR BODY BORE STD SLEEVE INSTALL & BORING WITH SLEEVE 54 RECONDITIONING OF LEYLAND AIR COMPRESSOR HEAD. 55 LEYLAND AIR COMPRESSOR CYLINDER HEAD THREAD PORTION WELDING & MACHINING. 56 LEYLAND AIR COMPRESSOR BODY HOLE OR HEAD HOLE INSERT WORK (FOR ONE HOLE) 57 OVERHAULING OFLEYLAND OIL PUMP ASSEMBLY. 58 LAYLAND OIL PUMP-WELD OIL PUMP SUCTION AND DELIVERY PIPE SEATING PLACE. 59 LEYLAND OIL PUMP BODY STUD HOLE INSERT WORK (FOR ONE HOLE). 60 LEYLAND ENGINE- ROCKER SHAFT CHANGING, ROCKER BUSHES CHANGING, BEND CHECKING, ROCKER SEAT GRINDING AND ASSEMBLING (FOR ONE ENGINE) (ROCKER BUSHES & SHAFT TNPL A/C.) 61 LEYLAND ENGINE - IDLER GEAR BUSH AND WASHER CHANGING (FOR ONE IDLER GEAR SET) 62 LEYLAND ENGINE–BORE AND INSTALL STD SLEEVE IN IDLER HUB SEATING PLACE 63 LEYLAND ENGINE DAMPER PULLEY OIL SEAL SEATING AREA SLEEVE MACHININGAND FITTING (FOR ONE PULLEY) 64 LEYLAND ENGINE–WATER RAIL MOUTH PIECE ALUMINIMUM WELDING AND MACHINING (FOR ONE RAIL) 65 LEYLAND ENGINE–THERMOSTAT HOUSING STUD REMOVING OVER SIZE STUD FIXING WITH MATERIAL (FOR ONE STUD) 66 OVERHAULING OF LEYLAND DRIVE SHAFT ASSEMBLY (SEAL PARTY A/C.) BEARING AND SHAFT TNPL A/C. 67 LABOUR CHARGES FOR COMPLETE DISMANTLING AND ASSEMBLING OF LEYLAND HINO ENGINE 68 LABOUR CHARGES FOR COMPLETE DISMANTLING AND ASSEMBLING OF LEYLAND (401/402) ENGINE

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	27-11-2024	DATE CORRIGENDUM	Date	02-12-2024

Refer document

Refer document